Hi all.
I've got a pcengines APU running a recent snap (upgraded via bsd.rd),
and it doesn't seem to cleanly unmount the root filesystem on reboot,
always claiming "/mnt was not properly unmounted". Any ideas ideas why?
boot>
booting hd0a:/bsd: 6699132+2139392+259080+0+647168 [72+565392+375639]=0xa32eb0
entry point at 0x1000160 [7205c766, 34000004, 24448b12, 9060a304]
[ using 941744 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.8-current (GENERIC.MP) #1368: Sun Sep 13 20:53:28 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2098511872 (2001MB)
avail mem = 2031009792 (1936MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7e16d820 (7 entries)
bios0: vendor coreboot version "4.0" date 09/08/2014
bios0: PC Engines APU
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SPCR HPET APIC HEST SSDT SSDT SSDT
acpi0: wakeup devices AGPB(S4) HDMI(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4)
PE20(S4) PE21(S4) PE22(S4) PE23(S4) PIBR(S4) UOH1(S3) UOH2(S3) UOH3(S3)
UOH4(S3) UOH5(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD G-T40N Processor, 1000.14 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD G-T40N Processor, 1000.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpiprt0 at acpi0: bus -1 (AGPB)
acpiprt1 at acpi0: bus -1 (HDMI)
acpiprt2 at acpi0: bus 1 (PBR4)
acpiprt3 at acpi0: bus 2 (PBR5)
acpiprt4 at acpi0: bus 3 (PBR6)
acpiprt5 at acpi0: bus -1 (PBR7)
acpiprt6 at acpi0: bus 5 (PE20)
acpiprt7 at acpi0: bus -1 (PE21)
acpiprt8 at acpi0: bus -1 (PE22)
acpiprt9 at acpi0: bus -1 (PE23)
acpiprt10 at acpi0: bus 0 (PCI0)
acpiprt11 at acpi0: bus 4 (PIBR)
acpicpu0 at acpi0: !C2(0@100 io@0x841), C1(@1 halt!), PSS
acpicpu1 at acpi0: !C2(0@100 io@0x841), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
cpu0: 1000 MHz: speeds: 1000 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00),
msi, address 00:0d:b9:31:30:74
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4
ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00),
msi, address 00:0d:b9:31:30:75
rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 4
ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00),
msi, address 00:0d:b9:31:30:76
rgephy2 at re2 phy 7: RTL8169S/8110S/8211 PHY, rev. 4
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, AHCI
1.2
scsibus1 at ahci0: 32 targets
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ppb4 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
pci5 at ppb4 bus 5
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
umass0 at uhub2 port 1 configuration 1 interface 0 "Generic Flash Card
Reader/Writer" rev 2.01/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Multiple, Card Reader, 1.00> SCSI2 0/direct
removable serial.058f6366058F63666485
sd0: 3886MB, 512 bytes/sector, 7959552 sectors
udav0 at uhub3 port 5 configuration 1 interface 0 "Unknown Vendor RD9700" rev
1.10/1.01 addr 2
udav0: address 00:e0:4c:53:44:58
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (0b606ebc9774a32b.a) swap on sd0b dump on sd0b
WARNING: /mnt was not properly unmounted
Automatic boot in progress: starting file system checks.
/dev/sd0a (0b606ebc9774a32b.a): 148615 files, 1630099 used, 308348 free (47620
frags, 32591 blocks, 2.5% fragmentation)
/dev/sd0a (0b606ebc9774a32b.a): MARKING FILE SYSTEM CLEAN
setting tty flags
kern.bufcachepercent: 20 -> 70
kern.pool_debug: 1 -> 0
net.inet.ip.forwarding: 0 -> 1
hw.perfpolicy: manual -> auto
starting network
starting early daemons: syslogd(failed) ntpd(failed).
starting RPC daemons:.
savecore: /dev/sd0b: Device not configured
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd(failed) sndiod.
starting local daemons: cron.
Tue Sep 15 20:18:55 MDT 2015
OpenBSD/amd64 (apu.dtucker.net) (tty00)
login: root
[...]
# mount
/dev/sd0a on / type ffs (local, softdep)
# cat /etc/fstab
#0b606ebc9774a32b.b none swap sw
0b606ebc9774a32b.a / ffs rw,softdep 1 1
# reboot
syncing disks... done
rebooting...
PC Engines APU BIOS build date: Sep 8 2014
Total memory 2048 MB
AMD G-T40N Processor
CPU MHz=1001
USB MSC blksize=512 sectors=7959552
Press F10 key now for boot menu:
drive 0x000f2ab0: PCHS=0/0/0 translation=lba LCHS=987/128/63 s=7959552
Booting from Hard Disk...
Using drive 0, partition 3.
Loading.....
probing: pc0 com0 com1 mem[639K 2016M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.29
switching console to com0
boot>
booting hd0a:/bsd: 6699132+2139392+259080+0+647168 [72+565392+375639]=0xa32eb0
entry point at 0x1000160 [7205c766, 34000004, 24448b12, 9060a304]
[ using 941744 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.8-current (GENERIC.MP) #1368: Sun Sep 13 20:53:28 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2098511872 (2001MB)
avail mem = 2031009792 (1936MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7e16d820 (7 entries)
bios0: vendor coreboot version "4.0" date 09/08/2014
bios0: PC Engines APU
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SPCR HPET APIC HEST SSDT SSDT SSDT
acpi0: wakeup devices AGPB(S4) HDMI(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4)
PE20(S4) PE21(S4) PE22(S4) PE23(S4) PIBR(S4) UOH1(S3) UOH2(S3) UOH3(S3)
UOH4(S3) UOH5(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD G-T40N Processor, 1000.15 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD G-T40N Processor, 1000.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpiprt0 at acpi0: bus -1 (AGPB)
acpiprt1 at acpi0: bus -1 (HDMI)
acpiprt2 at acpi0: bus 1 (PBR4)
acpiprt3 at acpi0: bus 2 (PBR5)
acpiprt4 at acpi0: bus 3 (PBR6)
acpiprt5 at acpi0: bus -1 (PBR7)
acpiprt6 at acpi0: bus 5 (PE20)
acpiprt7 at acpi0: bus -1 (PE21)
acpiprt8 at acpi0: bus -1 (PE22)
acpiprt9 at acpi0: bus -1 (PE23)
acpiprt10 at acpi0: bus 0 (PCI0)
acpiprt11 at acpi0: bus 4 (PIBR)
acpicpu0 at acpi0: !C2(0@100 io@0x841), C1(@1 halt!), PSS
acpicpu1 at acpi0: !C2(0@100 io@0x841), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
cpu0: 1000 MHz: speeds: 1000 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00),
msi, address 00:0d:b9:31:30:74
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4
ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00),
msi, address 00:0d:b9:31:30:75
rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 4
ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00),
msi, address 00:0d:b9:31:30:76
rgephy2 at re2 phy 7: RTL8169S/8110S/8211 PHY, rev. 4
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, AHCI
1.2
scsibus1 at ahci0: 32 targets
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ppb4 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
pci5 at ppb4 bus 5
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
umass0 at uhub2 port 1 configuration 1 interface 0 "Generic Flash Card
Reader/Writer" rev 2.01/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Multiple, Card Reader, 1.00> SCSI2 0/direct
removable serial.058f6366058F63666485
sd0: 3886MB, 512 bytes/sector, 7959552 sectors
udav0 at uhub3 port 5 configuration 1 interface 0 "Unknown Vendor RD9700" rev
1.10/1.01 addr 2
udav0: address 00:e0:4c:53:44:58
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (0b606ebc9774a32b.a) swap on sd0b dump on sd0b
WARNING: /mnt was not properly unmounted
Automatic boot in progress: starting file system checks.
/dev/sd0a (0b606ebc9774a32b.a): FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/sd0a (0b606ebc9774a32b.a): 148615 files, 1630100 used, 308347 free (47619
frags, 32591 blocks, 2.5% fragmentation)
/dev/sd0a (0b606ebc9774a32b.a): MARKING FILE SYSTEM CLEAN
setting tty flags
kern.bufcachepercent: 20 -> 70
kern.pool_debug: 1 -> 0
net.inet.ip.forwarding: 0 -> 1
hw.perfpolicy: manual -> auto
starting network
starting early daemons: syslogd(failed) ntpd(failed).
starting RPC daemons:.
savecore: /dev/sd0b: Device not configured
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd(failed) sndiod.
starting local daemons: cron.
Tue Sep 15 20:21:38 MDT 2015
OpenBSD/amd64 (apu.dtucker.net) (tty00)
login:
--
Darren Tucker (dtucker at zip.com.au)
GPG key 8FF4FA69 / D9A3 86E9 7EEE AF4B B2D4 37C9 C982 80C7 8FF4 FA69
Good judgement comes with experience. Unfortunately, the experience
usually comes from bad judgement.
