Hello, I think this is what I tried a while ago, which is not possible. Cf http://openbsd-archive.7691.n7.nabble.com/Multi-VRF-bgpd-no-MPLS-td248639.html
Bgpd.conf(5) says : "Currently the routing table must belong to the default routing domain" -- Cordialement, Pierre BARDOU -----Message d'origine----- De : XU, YANG (YANG) [mailto:y...@research.att.com] Envoyé : dimanche 26 juillet 2015 14:28 À : misc@openbsd.org Objet : Re: rdomain with BGP dynamic route Thanks for the info. I read the rdomain configuration section. My problem is how to put prefix learned dynamically from a BGP neighbor to a specific rdomain (not default rdomain 0). Sadly, I still don't know if that's possible. Regards, -Yang ________________________________________ From: owner-m...@openbsd.org [owner-m...@openbsd.org] On Behalf Of Alexander Salmin [alexan...@salmin.biz] Sent: 25 July 2015 17:36 To: misc@openbsd.org Subject: Re: rdomain with BGP dynamic route Hey, man 5 bgpd.conf See section "Routing Domain Configuration" and parameters "export-target" and "import-target". I suspect that is what you want. Alexander Salmin On 2015-07-24 13:47, XU, YANG (YANG) wrote: > Let me describe it in another way. Can I create a new rdomain as a VRF and > use the rdomain to import/export customer's prefix through BGP? > > I will greatly appreciate it if you can provide any information. I have seen > some information online, but prefix is either from static configuration or > connected network. In my case, I need to support dynamic routes from BGP in > VRF. > > Thanks, > -Yang > > > > ________________________________________ > From: owner-m...@openbsd.org [owner-m...@openbsd.org] On Behalf Of XU, > YANG (YANG) > Sent: 23 July 2015 08:06 > To: misc@openbsd.org > Subject: rdomain with BGP dynamic route > > Hi all, > > I am configuring OpenBSD bgpd so that it can relay the routes learned from > customer BGP servers to a route reflector (RR). Customer BGP servers only > speak IPv4 BGP, so my OpenBSD bgpd needs to add different route-distinguisher > and route-target to the dynamic routes learned from each customer BGP > neighbor before forwarding to RR. As I understand, I should be able to use > rdomain to implement this. What I really need conceptually is to attach a BGP > neighbor to a rdomain, so that dynamic routes learned from that BGP neighbor > are added to the specified rdomain. But I failed to find a way to do this in > OpenBSD. Does anyone know if this is possible and give me an BGP configure > example? > > Many thanks in advance, > > -Yang
