On 07/11/15 17:15, Joseph Oficre wrote: > Hello, misc. > My dmesg: > OpenBSD 5.8-beta (GENERIC.MP) #1141: Fri Jul 10 11:31:23 MDT 2015 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 80<clock_battery> > real mem = 8451125248 (8059MB) > avail mem = 8191127552 (7811MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (67 entries) > bios0: vendor LENOVO version "8BET62WW (1.42 )" date 07/26/2013 > bios0: LENOVO 428445G > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA > SSDT SSDT UEFI UEFI UEFI > acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) > EHC2(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.87 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX > ,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A > E > S,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX > ,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A > E > S,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX > ,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A > E > S,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX > ,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A > E > S,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > cpu4 at mainbus0: apid 4 (application processor) > cpu4: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz > cpu4: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX > ,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A > E > S,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu4: 256KB 64b/line 8-way L2 cache > cpu4: smt 0, core 2, package 0 > cpu5 at mainbus0: apid 5 (application processor) > cpu5: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz > cpu5: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX > ,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A > ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu5: 256KB 64b/line 8-way L2 cache > cpu5: smt 1, core 2, package 0 > cpu6 at mainbus0: apid 6 (application processor) > cpu6: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz > cpu6: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX > ,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A > ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu6: 256KB 64b/line 8-way L2 cache > cpu6: smt 0, core 3, package 0 > cpu7 at mainbus0: apid 7 (application processor) > cpu7: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2292.56 MHz > cpu7: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX > ,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A > ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu7: 256KB 64b/line 8-way L2 cache > cpu7: smt 1, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG_) > acpiprt2 at acpi0: bus 2 (EXP1) > acpiprt3 at acpi0: bus 3 (EXP2) > acpiprt4 at acpi0: bus 5 (EXP4) > acpiprt5 at acpi0: bus 13 (EXP5) > acpiprt6 at acpi0: bus 14 (EXP7) > acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > acpicpu4 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > acpicpu5 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > acpicpu6 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > acpicpu7 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2 > acpitz0 at acpi0: critical temperature is 99 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "42T4799" serial 21914 type LION oem "SANYO" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > cpu0: Enhanced SpeedStep 2292 MHz: speeds: 2301, 2300, 1800, 1600, 1400, > 1200, 1000, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 > intagp at vga1 not configured > inteldrm0 at vga1 > drm0 at inteldrm0 > inteldrm0: 1920x1080 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com > com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo > com4: probed fifo depth: 0 bytes > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > f0:de:f1:ad:54:34 > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > azalia0: codecs: Conexant/0x506e, Conexant/0x2c06, using Conexant/0x506e > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > pci1 at ppb0 bus 2 > ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi > pci2 at ppb1 bus 3 > iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x3e: > msi, MIMO 3T3R, MoW, address 24:77:03:28:08:40 > ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi > pci3 at ppb2 bus 5 > ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi > pci4 at ppb3 bus 13 > sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x08: apic 2 int 16 > sdmmc0 at sdhc0 > "Ricoh 5U832 Firewire" rev 0x04 at pci4 dev 0 function 3 not configured > ppb4 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi > pci5 at ppb4 bus 14 > xhci0 at pci5 dev 0 function 0 "NEC xHCI" rev 0x04: msi > usb1 at xhci0: USB revision 3.0 > uhub1 at usb1 "NEC xHCI root hub" rev 3.00/1.00 addr 1 > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI > 1.3 > ahci0: port 0: 3.0Gb/s > ahci0: port 1: 1.5Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct fixed > naa.5000c50044bc194e > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT33N, LT30> ATAPI 5/cdrom > removable > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 > int 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM > spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM > spdmem2 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM > spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.2 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > aps0 at isa0 port 0x1600/31 > uhub3 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > uhidev0 at uhub3 port 2 configuration 1 interface 0 "Genius USB Optical > Mouse" rev 2.00/1.00 addr 3 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse2 at ums0 mux 0 > ugen0 at uhub3 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 4 > ugen1 at uhub3 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev > 2.00/7.48 addr 5 > uvideo0 at uhub3 port 6 configuration 1 interface 0 "Ricoh Company Ltd. > Integrated Camera" rev 2.00/80.29 addr 6 > video0 at uvideo0 > uhub4 at uhub2 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (380463e4fcd12dda.a) swap on sd0b dump on sd0b > > > After updating some packages pkg_add just freezes and after ^C i get this > messages: > > No change in libidn-1.30 > ^C^CFatal error: Caught SIGINT > at /usr/libdata/perl5/OpenBSD/AddDelete.pm line 40. > Segmentation fault (core dumped) > > gdb /usr/bin/perl perl.core shows: > Core was generated by `perl'. > Program terminated with signal 11, Segmentation fault. > Reading symbols from /usr/lib/libpthread.so.19.0...done. > Loaded symbols for /usr/lib/libpthread.so.19.0 > Loaded symbols for /usr/bin/perl > Symbols already loaded for /usr/lib/libpthread.so.19.0 > Reading symbols from /usr/lib/libperl.so.17.1...done. > Loaded symbols for /usr/lib/libperl.so.17.1 > Reading symbols from /usr/lib/libm.so.9.0...done. > Loaded symbols for /usr/lib/libm.so.9.0 > Reading symbols from /usr/lib/libutil.so.12.1...done. > Loaded symbols for /usr/lib/libutil.so.12.1 > Reading symbols from /usr/lib/libc.so.80.0...done. > Loaded symbols for /usr/lib/libc.so.80.0 > Reading symbols from /usr/libexec/ld.so...done. > Loaded symbols for /usr/libexec/ld.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Fcntl/Fcntl.so...done. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Fcntl/Fcntl.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Cwd/Cwd.so...done. > Loaded symbols for /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Cwd/Cwd.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/File/Glob/Glob.so...done. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/File/Glob/Glob.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/POSIX/POSIX.so...done. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/POSIX/POSIX.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/List/Util/Util.so...done. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/List/Util/Util.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/OpenBSD/MkTemp/MkTemp.so...done. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/OpenBSD/MkTemp/MkTemp.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Socket/Socket.so...done. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Socket/Socket.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Sys/Syslog/Syslog.so...done. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Sys/Syslog/Syslog.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Digest/SHA/SHA.so...done. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Digest/SHA/SHA.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/MIME/Base64/Base64.so...done. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/MIME/Base64/Base64.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/IO/IO.so...done. > Loaded symbols for /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/IO/IO.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Compress/Raw/Zlib/Zlib.so...done > . > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Compress/Raw/Zlib/Zlib.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Compress/Raw/Bzip2/Bzip2.so...do > ne. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/Compress/Raw/Bzip2/Bzip2.so > Reading symbols from > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/PerlIO/scalar/scalar.so...done. > Loaded symbols for > /usr/libdata/perl5/amd64-openbsd/5.20.2/auto/PerlIO/scalar/scalar.so > #0 0x00000009d06be71e in Perl_sv_clear (orig_sv=0x9b6ebe580) at > /usr/src/gnu/usr.bin/perl/sv.c:6341 > 6341 /usr/src/gnu/usr.bin/perl/sv.c: No such file or directory. > in /usr/src/gnu/usr.bin/perl/sv.c > > > and backtrace: > (gdb) backtrace > #0 0x00000009d06be71e in Perl_sv_clear (orig_sv=0x9b6ebe580) at > /usr/src/gnu/usr.bin/perl/sv.c:6341 > #1 0x00000009d06bf09a in Perl_sv_free2 (sv=0x9b6ebe580, rc=Variable "rc" > is not available. > ) at /usr/src/gnu/usr.bin/perl/sv.c:6805 > #2 0x00000009d06ba630 in S_visit (f=0x9d06bf150 <do_clean_objs>, > flags=2048, mask=2048) at /usr/src/gnu/usr.bin/perl/sv.c:485 > #3 0x00000009d06bf7cc in Perl_sv_clean_objs () at > /usr/src/gnu/usr.bin/perl/sv.c:640 > #4 0x00000009d074e78c in perl_destruct (my_perl=Variable "my_perl" is not > available. > ) at perl.c:804 > #5 0x0000000764601412 in main () from /usr/bin/perl > > > > How can i solve this problem and update my packages? changing mirrors does > nothing > > . >
Once pkg_add goes wrong the /var/db/pkg/ is corrupted, that needs to be fixed first. Retrying changing mirrors will get nowhere depending how bad the corruption was. pkg_check can be used to fix some things, before retrying. If the problem is with specific packages, sometimes uninstalling and reinstalling those packages works. /var/log/messages should have recorded pkg_add's, reproducing pkg_add problems is difficult and depends on what's been installed, and what your updating to, and which package failed. If everything fails, then do the same as described in http://www.openbsd.org/faq/upgrade55.html#upgrade Create lists of packages, delete all but firmware packages, add a pkg_check to ensure /var/db/pkg is correct, then follow the fuzzy update to install packages from the lists at the very end of the upgrade. pkg_info -mq >/root/pkg_list_manual pkg_info -q >/root/pkg_list_full pkg_delete -X /var/db/pkg/*-firmware-[0-9]* pkg_check pkg_add -z -l /root/pkg_list_manual pkg_add -za -l /root/pkg_list_full
