hello,
here is a partial dmesg from an acer travelmate b115-m.
this is fairly new hardware and it almost boots up
all the way.
1. wifi is atheros. sigh. will try to replace it
(hopefully there is no whitelist like on lenovo)
2. notice that spdmem identifies 4G of RAM,
but only 2 show up.
3. no inteldrm support yet
4. IIUC, something is wrong with the usb hub
and in the process the boot device is lost.
i tried disabling xhci, no disabled port messages,
however no usb at all. bios has no usb legacy options.
i'd be happy to test patches :)
-f
OpenBSD 5.7-current (GENERIC.MP) #898: Wed May 27 11:51:38 MDT 2015
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz ("GenuineIntel" 686-class) 2.17
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS
real mem = 2027171840 (1933MB)
avail mem = 1981759488 (1889MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 09/12/14, BIOS32 rev. 0 @ 0xef725, SMBIOS rev. 2.7 @
0xe6eb0 (22 entries)
bios0: vendor Insyde Corp. version "1.26" date 09/12/2014
bios0: Acer TravelMate B115-M
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI UEFI SSDT HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT
SSDT CSRT SSDT FPDT
acpi0: wakeup devices XHC1(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4)
RP03(S4) PXSX(S4) RP04(S4) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz ("GenuineIntel" 686-class) 2.17
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz ("GenuineIntel" 686-class) 2.17
GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz ("GenuineIntel" 686-class) 2.17
GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 87 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiec0 at acpi0
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpicpu2 at acpi0: C1, PSS
acpicpu3 at acpi0: C1, PSS
acpipwrres0 at acpi0: PC05, resource for RP01
acpipwrres1 at acpi0: USBC, resource for OTG1, EHC1
acpitz0 at acpi0: critical temperature is 105 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT1 model "AC14B8K" serial 37768 type LION oem "UNKNOWN"
acpibtn2 at acpi0: LID_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
bios0: ROM list: 0xc0000/0xe400! 0xce800/0x1000
cpu0: Enhanced SpeedStep 2167 MHz: speeds: 2159, 2158, 1992, 1826, 1660, 1494,
1328, 1162, 996, 830, 664, 498 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
vga1 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
intagp at vga1 not configured
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x02: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD5000LPVX-2, 01.0> SCSI3 0/direct
fixed naa.50014ee2b5f5f032
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0e: msi
azalia0: codecs: Realtek/0x0283, Intel/0x2882, using Realtek/0x0283
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail I2C" rev 0x0e: apic 2 int 16
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x0e: apic 2 int 17
pci2 at ppb1 bus 2
"Atheros AR9462" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x0e: apic 2 int 18
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address 2c:16:d3:b6:19:57
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pcib0 at pci0 dev 31 function 2 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e: apic 2 int
18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhub1 at uhub0 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 2
uhub1: port 1, set config 0 at addr 3 failed
uhub1: device problem, disabling port 1
uhub1: device problem, disabling port 3
uvideo0 at uhub0 port4 configuration 1 interface 0 "NC2141102T503020A3LM09 HD
WebCam" rev 2.00/0.09 addr 3
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
panic: root device (8dee11390a2c5c31) not found
Stopped at Debugger+0x7: leave
--
one seventh of our lives is spent on mondays.
