I am trying to install OpenBSD on a Soekris 4801. I am getting the following
error when I try to partition the disk prior to installing the sets. I tried
5.7 and 5.6, so I'm guessing this may be a hardware issues. Hopefully someone
out there can provide some insight.
Thanks in advance,
Edgar
/dev/rwd0a: 3051.8MB in 6250080 sectors of 512 bytes
16 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 8192
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
pciide0 channel 0: reset failed for drive 0
wd0a: device timeout writing fsbn 16 of 16-31 (wd0 bn 80; cn 0 tn 1 sn 17),
retrying
pciide0:0:0: not ready, st=0x80<BSY>, err=0x00
pciide0 channel 0: reset failed for drive 0
wd0a: device timeout writing fsbn 16 of 16-31 (wd0 bn 80; cn 0 tn 1 sn 17),
retrying
