Problem is that only the ugen driver is present... so I think there is no chance of speaking with the modem.
Will read the link thoruoughly On Wed, Apr 29, 2015 at 4:27 PM, Zé Loff <zel...@zeloff.org> wrote: > On Wed, Apr 29, 2015 at 12:34:12PM -0300, Cristián Edwards wrote: > > Hello, > > > > How to configure cdce0 device in OpenBSD? > > > > Dmesg: > > cdce0 at uhub1 port 1 configuration 2 interface 0 "Huawei Technologies > > HUAWEI Mobile" rev 2.00/0.00 addr 2 cdce0: address 00:a0:c6:60:85:70 > > ugen0 at uhub1 port 1 configuration 2 "Huawei Technologies HUAWEI Mobile" > > rev 2.00/0.00 addr 2 > > cdce0: flags=28843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NOINET6> mtu > > 1500 lladdr 00:a0:c6:60:85:70 priority: 0 > > > > ifconfig: > > cdce0: flags=28843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NOINET6> mtu > > 1500 > > lladdr 00:a0:c6:60:85:70 > > priority: 0 > > > > > > Hardware: > > > http://consumer.huawei.com/en/solutions/m2m-solutions/products/tech-specs/mu6 09-en.htm > > > > Regards, > > > > Cristian > > > > You probably need to bring up the modem first. See this message (and > rest of thread) as well as the thread it quotes: > > http://marc.info/?l=openbsd-misc&m=142213746124451&w=2 > > Cheers > Zé > > --
