hru...@gmail.com (hru...@gmail.com), 2015.04.04 (Sat) 21:28 (CEST): > Did somenone manage to send Fax with an UMTS Stick? What vendor and > device?
When I used phone line modems there were modems _with_ fax capabilities and some _without_. Possibly the same applies for those GPRS/UMTS/HSDPA/LTE/DARNWHATSILLYACRONYMS modems? > And if somene has an UMTS Stick that answers "+FCLASS" to "AT+GCAP", > then I would thank for a hint, perhaps per Email, to the its vendor, > device and answer to "AT+FCLASS=?". Sorry, no. But I can confirm failure. Are you sure "AT+GCAP" is the right command? I'd be interested in such a fax-capable device as well... My two failing usb modems: +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Modem label: ZTE MF626 HSDPA USB MODEM An old and probably invalid SIM card was inserted. umsm0 at uhub1 port 1 configuration 1 interface 0 "ZTE,Incorporated ZTE CDMA Technologies MSM" rev 2.00/0.00 addr 3 ucom0 at umsm0 umsm1 at uhub1 port 1 configuration 1 interface 1 "ZTE,Incorporated ZTE CDMA Technologies MSM" rev 2.00/0.00 addr 3 ucom1 at umsm1 umass1 at uhub1 port 1 configuration 1 interface 2 "ZTE,Incorporated ZTE CDMA Technologies MSM" rev 2.00/0.00 addr 3 umass1: using SCSI over Bulk-Only scsibus5 at umass1: 2 targets, initiator 0 sd3 at scsibus5 targ 1 lun 0: <ZTE, MMC Storage, 2.31> SCSI2 0/direct removable umsm2 at uhub1 port 1 configuration 1 interface 3 "ZTE,Incorporated ZTE CDMA Technologies MSM" rev 2.00/0.00 addr 3 ucom2 at umsm2 $ sudo cu -l /dev/ttyU2 Connected to /dev/ttyU2 (speed 9600) at OK AT+GCAP ERROR AT+FCLASS=? +FCLASS: (0-1) OK $ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Modem label: ZTE MF112 HSUPA USB Stick An old and probably invalid SIM card was inserted. umsm0 at uhub1 port 1 configuration 1 interface 0 "ZTE,Incorporated ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 3 ucom0 at umsm0 umsm1 at uhub1 port 1 configuration 1 interface 1 "ZTE,Incorporated ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 3 ucom1 at umsm1 umsm2 at uhub1 port 1 configuration 1 interface 2 "ZTE,Incorporated ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 3 ucom2 at umsm2 umsm3 at uhub1 port 1 configuration 1 interface 3 "ZTE,Incorporated ZTE WCDMA Technologies MSM" rev 2.00/0.00 addr 3 $ sudo cu -l /dev/ttyU2 Connected to /dev/ttyU2 (speed 9600) at OK AT+GCAP ERROR AT+FCLASS=? +FCLASS: (0-1) OK $ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Bye, Marcus > !DSPAM:55203c23195201740642354!
