Re: SMP kernel/AMD64 stuck in reboot loop - NIC driver or other bug?

Sat, 21 Mar 2015 06:03:01 -0700

Well, I discovered the issue - the few machines that work properly had a different quad-port nic in them.
With certain BIOS settings, you can catch part of the kernel panic before the screen goes crazy. 

Codes that were visible depending on BIOS settings:

"kernel: type 1994916275 trap, code=0"
"kernel: type 269 trap. code=0"


You can reproduce the error on this hardware by trying to boot the 
AMD64/MP kernel with a quad-port Intel I340-T4 (Copper) with 82580 
chipset on this hardware. (SuperMicro H8SGL-F motherboard, AMD 6344 cpu).



I tried this on 4 identical machines, all purchased in the same batch, 
with four different NICs.  Same result always.  I have no idea if it's 
the NIC driver, or something else - but it works fine without the NIC, 
or with a different one (82573L).



If anyone has any ideas, or would like more info, or if a dev suspects 
it could be the driver, contact me off-list and I can arrange to send 
hardware if it helps.


-John

On 03/20/2015 03:09 PM, John E.P. Hynes wrote:

I've got three identical boxes that all display the same behavior: 
Install of 5.6 or the March 18th 5.7 snapshot works, but is painfully 
slow (no disk access on the CD or disks while "stalled") and on the 
first reboot, it gets about as far as loading wskbd before rebooting 
spontaneously.  I'm trying to install onto a softraid RAID 1, but I've 
also tried this with just one disk to the same result.



If I boot bsd.sp at the boot prompt, it will run without issue on the 
SP kernel.


dmesg follows.  If anyone has any insight, let me know please.

OpenBSD 5.6 (GENERIC) #310: Fri Aug  8 00:14:24 MDT 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 8571715584 (8174MB)
avail mem = 8334798848 (7948MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9ac00 (40 entries)
bios0: vendor American Megatrends Inc. version "3.5" date 11/25/2013
bios0: Supermicro H8SGL
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SRAT SSDT

acpi0: wakeup devices PC02(S4) PC03(S4) PC04(S4) PC05(S4) PC06(S4) 
PC07(S4) PC09(S4) PC0A(S4) PC0B(S4) PC0C(S4) SBAZ(S4) PSKE(S4) 
PSMS(S4) ECIR(S4) P0PC(S4) UHC1(S4) [...]

acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 32 (boot processor)
cpu0: AMD Opteron(tm) Processor 6344 , 2600.39 MHz

cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1
cpu0: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 
64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache
cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully 
associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully 
associative

cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec20000, version 21, 32 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PC02)
acpiprt2 at acpi0: bus -1 (PC03)
acpiprt3 at acpi0: bus -1 (PC04)
acpiprt4 at acpi0: bus 2 (PC09)
acpiprt5 at acpi0: bus 3 (PC0A)
acpiprt6 at acpi0: bus 4 (P0PC)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: 2600 MHz: speeds: 2600 2300 2000 1700 1400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI SR5650 Host" rev 0x02
ppb0 at pci0 dev 2 function 0 "ATI SR5690 PCIE" rev 0x00: msi
pci1 at ppb0 bus 1

em0 at pci1 dev 0 function 0 "Intel 82580" rev 0x01: msi, address 
90:e2:ba:35:2c:dc
em1 at pci1 dev 0 function 1 "Intel 82580" rev 0x01: msi, address 
90:e2:ba:35:2c:dd
em2 at pci1 dev 0 function 2 "Intel 82580" rev 0x01: msi, address 
90:e2:ba:35:2c:de
em3 at pci1 dev 0 function 3 "Intel 82580" rev 0x01: msi, address 
90:e2:ba:35:2c:df

ppb1 at pci0 dev 9 function 0 "ATI SR5690 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2

em4 at pci2 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 
00:25:90:86:71:38

ppb2 at pci0 dev 10 function 0 "ATI SR5690 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3

em5 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 
00:25:90:86:71:39
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 0 int 
22, AHCI 1.1

scsibus1 at ahci0: 32 targets

sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD5003ABYX-0, 01.0> SCSI3 
0/direct fixed naa.50014ee0ae4b4a94

sd0: 476940MB, 512 bytes/sector, 976773168 sectors

sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD5003ABYX-0, 01.0> SCSI3 
0/direct fixed naa.50014ee0ae4b5019

sd1: 476940MB, 512 bytes/sector, 976773168 sectors

ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 
16, version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 0 int 
16, version 1.0, legacy support

ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1

ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 
18, version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 0 int 
18, version 1.0, legacy support

ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3d: SMI
iic0 at piixpm0
sdtemp0 at iic0 addr 0x1d: stts2002
sdtemp1 at iic0 addr 0x1f: stts2002
nvt0 at iic0 addr 0x2f: W83795G

spdmem0 at iic0 addr 0x55: 4GB DDR3 SDRAM registered ECC PC3-12800 
with thermal sensor
spdmem1 at iic0 addr 0x57: 4GB DDR3 SDRAM registered ECC PC3-12800 
with thermal sensor
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, 
channel 0 configured to compatibility, channel 1 configured to 
compatibility

pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci4 at ppb3 bus 4
vga1 at pci4 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 0 int 
18, version 1.0, legacy support

pchb1 at pci0 dev 24 function 0 "AMD AMD64 15/0xh Link Cfg" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 15/0xh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 15/0xh DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 15/0xh Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 15/0xh CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 15/0xh Host" rev 0x00
pchb6 at pci0 dev 25 function 0 "AMD AMD64 15/0xh Link Cfg" rev 0x00
pchb7 at pci0 dev 25 function 1 "AMD AMD64 15/0xh Address Map" rev 0x00
pchb8 at pci0 dev 25 function 2 "AMD AMD64 15/0xh DRAM Cfg" rev 0x00
km1 at pci0 dev 25 function 3 "AMD AMD64 15/0xh Misc Cfg" rev 0x00
pchb9 at pci0 dev 25 function 4 "AMD AMD64 15/0xh CPU Power" rev 0x00
pchb10 at pci0 dev 25 function 5 "AMD AMD64 15/0xh Host" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
wbsio0 port 0xa10/2 not configured
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1

umass0 at uhub0 port 2 configuration 1 interface 0 "Sony DRX-820U" rev 
2.00/4.63 addr 2

umass0: using ATAPI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0

cd0 at scsibus2 targ 1 lun 0: <SONY, DVD RW DRU-820A, 2.0c> ATAPI 
5/cdrom removable serial.054c02910U_MP00084E3
uhidev0 at uhub2 port 1 configuration 1 interface 0 "DELL DELL USB 
Keyboard" rev 1.10/1.05 addr 2

uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0

uhidev1 at uhub4 port 3 configuration 1 interface 0 "Winbond 
Electronics Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr 2

uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0

uhidev2 at uhub4 port 3 configuration 1 interface 1 "Winbond 
Electronics Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr 2

uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
softraid0: sd2 was not shutdown properly

sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct 
fixed

sd2: 476937MB, 512 bytes/sector, 976767473 sectors
root on sd2a (596cd0530ec2955d.a) swap on sd2b dump on sd2b
























					Reply via email to