Hello!
I have a Sun Sparc t5120 that cannot start ldomd after a firmware upgrade.
It’s possible to start ldomd before I have divided the machine into several
guest domains.
Afterwards it just hangs when trying to start ldomd and the machine is
unresponsive (answers on ping though).
Ldomd does not give any error messages.
Does anyone have any idea why?
Right now my plan is to downgrade the firmware. Does anyone have a known
working version to provide me?
I only have version 7.4.8 and nothing older.
Output from showhost in ALOM:
Sun System Firmware 7.4.8 2014/07/10 13:15
Host flash versions:
Hypervisor 1.10.7.g 2014/07/10 11:46
OpenBoot 4.33.6.f 2014/07/10 10:23
POST 4.33.6.f 2014/07/10 10:32
My ldom.conf:
domain primary {
vcpu 16
memory 8064M
}
domain ldom1 {
vcpu 16
memory 8G
vdisk "/dev/sd0c"
vdisk "/home/ldom/ldom1/miniroot.fs"
vnet
vnet
}
domain ldom2 {
vcpu 16
memory 8G
vdisk "/dev/sd2c"
vdisk "/home/ldom/ldom2/miniroot.fs"
vnet
vnet
}
domain ldom3 {
vcpu 16
memory 8G
vdisk "/dev/sd3c"
vdisk "/home/ldom/ldom3/miniroot.fs"
vnet
vnet
}
dmesg from primary domain:
console is /virtual-devices@100/console@1
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.7-beta (GENERIC.MP) #447: Thu Jan 22 18:38:23 MST 2015
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 8455716864 (8064MB)
avail mem = 8303960064 (7919MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: SPARC Enterprise T5120
cpu0 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu1 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu2 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu3 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu4 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu5 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu6 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu7 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu8 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu9 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu10 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu11 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu12 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu13 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu14 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu15 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
vbus0 at mainbus0
"flashprom" at vbus0 not configured
"tpm" at vbus0 not configured
cbus0 at vbus0
vldc0 at cbus0
vldcp0 at vldc0 chan 0x14: ivec 0x228, 0x229 channel "spds"
"sunvts" at vldc0 chan 0x6 not configured
"sunmc" at vldc0 chan 0x7 not configured
"explorer" at vldc0 chan 0x8 not configured
"led" at vldc0 chan 0x9 not configured
"flashupdate" at vldc0 chan 0xa not configured
"ipmi" at vldc0 chan 0xc not configured
"system-management" at vldc0 chan 0xd not configured
vldc1 at cbus0
"spfma" at vldc1 chan 0x5 not configured
vldc2 at cbus0
vldcp1 at vldc2 chan 0x0: ivec 0x200, 0x201 channel "hvctl"
"ldom-primary" at vldc2 chan 0x1 not configured
"fmactl" at vldc2 chan 0x3 not configured
vldcp2 at vldc2 chan 0x19: ivec 0x232, 0x233 channel "ldom-ldom1"
vldcp3 at vldc2 chan 0x1f: ivec 0x23e, 0x23f channel "ldom-ldom2"
vldcp4 at vldc2 chan 0x25: ivec 0x24a, 0x24b channel "ldom-ldom3"
vldc3 at cbus0
"ldmfma" at vldc3 chan 0x4 not configured
"virtual-domain-service" at cbus0 not configured
vcc0 at cbus0
vcctty0 at vcc0 chan 0x18: ivec 0x230, 0x231 domain "ldom1"
vcctty1 at vcc0 chan 0x1e: ivec 0x23c, 0x23d domain "ldom2"
vcctty2 at vcc0 chan 0x24: ivec 0x248, 0x249 domain "ldom3"
vds0 at cbus0
vdsp0 at vds0 chan 0x1a: ivec 0x234, 0x235
vdsp1 at vds0 chan 0x1b: ivec 0x236, 0x237
vdsp2 at vds0 chan 0x20: ivec 0x240, 0x241
vdsp3 at vds0 chan 0x21: ivec 0x242, 0x243
vdsp4 at vds0 chan 0x26: ivec 0x24c, 0x24d
vdsp5 at vds0 chan 0x27: ivec 0x24e, 0x24f
vsw0 at cbus0
vnet0 at vsw0 chan 0x1c: ivec 0x238, 0x239
vnet1 at vsw0 chan 0x1d: ivec 0x23a, 0x23b
vnet2 at vsw0 chan 0x22: ivec 0x244, 0x245
vnet3 at vsw0 chan 0x23: ivec 0x246, 0x247
vnet4 at vsw0 chan 0x28: ivec 0x250, 0x251
vnet5 at vsw0 chan 0x29: ivec 0x252, 0x253
vrng0 at vbus0
vcons0 at vbus0: ivec 0x111, console
vrtc0 at vbus0
vpci0 at mainbus0: bus 2 to 18, dvma map 80000000-ffffffff
pci0 at vpci0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8533" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "PLX PEX 8517" rev 0xad
pci3 at ppb2 bus 5
ppb3 at pci3 dev 1 function 0 "PLX PEX 8517" rev 0xad
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "PLX PEX 8112" rev 0xaa
pci5 at ppb4 bus 7
ohci0 at pci5 dev 0 function 0 "NEC USB" rev 0x43: ivec 0x16, version 1.0
ohci1 at pci5 dev 0 function 1 "NEC USB" rev 0x43: ivec 0x17, version 1.0
ehci0 at pci5 dev 0 function 2 "NEC USB" rev 0x04: ivec 0x14
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ppb5 at pci3 dev 2 function 0 "PLX PEX 8517" rev 0xad
pci6 at ppb5 bus 8
em0 at pci6 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x17, address
00:21:28:0f:c0:00
em1 at pci6 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x14, address
00:21:28:0f:c0:01
ppb6 at pci3 dev 3 function 0 "PLX PEX 8517" rev 0xad
pci7 at ppb6 bus 9
em2 at pci7 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x14, address
00:21:28:0f:c0:02
em3 at pci7 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x15, address
00:21:28:0f:c0:03
ppb7 at pci1 dev 2 function 0 "PLX PEX 8533" rev 0xaa
pci8 at ppb7 bus 10
mpi0 at pci8 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x02: msi
mpi0: UNUSED, firmware 1.22.0.0
scsibus1 at mpi0: 112 targets
sym0 at scsibus1 targ 0 lun 0: <SEAGATE, ST914602SSUN146G, 0603> SCSI3 0/direct
fixed naa.5000c5000c20f7eb
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST914602SSUN146G, 0603> SCSI3 0/direct
fixed naa.5000c5000c20f7eb
sd0: 140009MB, 512 bytes/sector, 286739329 sectors
sym1 at scsibus1 targ 1 lun 0: <SEAGATE, ST914602SSUN146G, 0603> SCSI3 0/direct
fixed naa.5000c5000c64b3c7
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST914602SSUN146G, 0603> SCSI3 0/direct
fixed naa.5000c5000c64b3c7
sd1: 140009MB, 512 bytes/sector, 286739329 sectors
sym2 at scsibus1 targ 2 lun 0: <SEAGATE, ST914602SSUN146G, 0603> SCSI3 0/direct
fixed naa.5000c5000eb29e0f
sd2 at scsibus0 targ 2 lun 0: <SEAGATE, ST914602SSUN146G, 0603> SCSI3 0/direct
fixed naa.5000c5000eb29e0f
sd2: 140009MB, 512 bytes/sector, 286739329 sectors
sym3 at scsibus1 targ 3 lun 0: <SEAGATE, ST914602SSUN146G, 0603> SCSI3 0/direct
fixed naa.5000c5000eb3cfe3
sd3 at scsibus0 targ 3 lun 0: <SEAGATE, ST914602SSUN146G, 0603> SCSI3 0/direct
fixed naa.5000c5000eb3cfe3
sd3: 140009MB, 512 bytes/sector, 286739329 sectors
ppb8 at pci1 dev 8 function 0 "PLX PEX 8533" rev 0xaa
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci10 at ppb9 bus 12
ppb10 at pci10 dev 1 function 0 "PLX PEX 8533" rev 0xaa: msi
pci11 at ppb10 bus 13
ppb11 at pci10 dev 2 function 0 "PLX PEX 8533" rev 0xaa: msi
pci12 at ppb11 bus 14
ppb12 at pci10 dev 8 function 0 "PLX PEX 8533" rev 0xaa: msi
pci13 at ppb12 bus 15
ppb13 at pci10 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi
pci14 at ppb13 bus 16
ppb14 at pci10 dev 10 function 0 "PLX PEX 8533" rev 0xaa: msi
pci15 at ppb14 bus 17
ppb15 at pci1 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi
pci16 at ppb15 bus 18
"niu" at mainbus0 not configured
"pci-performance-counters" at mainbus0 not configured
ebus0 at mainbus0
com0 at ebus0 addr ca0000-ca0007 ivec 0x13: ns16550a, 16 byte fifo
umass0 at uhub0 port 2 configuration 1 interface 0 "Texas Instruments
Incorporated 6250 FW: 03.05.02.22.562AD423" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd0 at scsibus2 targ 1 lun 0: <TSSTcorp, CD/DVDW TS-T632A, SR03> SCSI0 5/cdrom
removable serial.0451625fB030B0CA1413
uhub3 at uhub0 port 4 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 3
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@0,0/pci@0,0/pci@2,0/scsi@0,0/disk@1,0
root on sd1a (9656dfa1665ad88d.a) swap on sd1b dump on sd1b
