Hi Folks,
I've Googled until I'm blue in the face and checked the bug reporting
system and cannot find an answer to my problem.
I have just completed two 3.8 release installs on two different hardware
platforms, both i386 but one a Celeron D / 75xx chipset box (Gigabyte
SR147S server chassis) and the other a PIII / 815 chipset box.
On both platforms I've also installed GNOME from the release packages.
The problem I'm having is that on both installs when running in a GNOME
session the GNOME-PANEL quits at various random times and during
different operations, although only when interacting with the panel.
As this occurs on both platforms I can discount a hardware problem but
Google only shows one other post on the problem, which appears to have
been dismissed due to lack of information.
Does anyones else have this issue and if so is there a workaround?
Thanks for any replies
Simon
DMESG from SR147S (Gigabyte Server)
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.66GHz ("GenuineIntel" 686-class) 2.66 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3
,MWAIT,CNXT-ID
real mem = 535859200 (523300K)
avail mem = 482045952 (470748K)
using 4278 buffers containing 26894336 bytes (26264K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(dc) BIOS, date 12/13/04, BIOS32 rev. 0 @ 0xfd5e6
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd550/0xab0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/304 (17 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq
10, address: 00:0d:61:7c:2c:ca
ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 5300ESB USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 7
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci3 at ppb2 bus 3
vga1 at pci3 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em1 at pci3 dev 10 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq
5, address: 00:0d:61:7c:2c:cb
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configu
red to compatibility
wd0 at pciide0 channel 0 drive 0: <ST380817AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CD-ROM SR244W, T01A> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 6300ESB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ebe5 netmask efe5 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
