Hey,
First off: I'm new to OpenBSD :). I'm running 5.6-STABLE with stable 5.6
ports tree. I've updated my CUPS installation which had some USB patches
in it. However, I cannot see my printer via
webinterface/Administration/Add Printer. The only options I can choose
from are "Other Network Printer".
However, CUPS does see my printer from the command line:
# /usr/local/libexec/cups/backend/usb
DEBUG: Loading USB quirks from "/usr/local/share/cups/usb".
DEBUG: Loaded 68 quirks.
DEBUG: list_devices
DEBUG: libusb_get_device_list=6
DEBUG2: Printer found with device ID: MFG:Samsung;CMD:SPLC;MDL:CLP-310
Series;CLS:PRINTER;STATUS:BUSY; Device URI:
usb://Samsung/CLP-310%20Series?serial=1434BAFQ600490E
direct usb://Samsung/CLP-310%20Series?serial=1434BAFQ600490E "Samsung
CLP-310 Series" "Samsung CLP-310 Series"
"MFG:Samsung;CMD:SPLC;MDL:CLP-310 Series;CLS:PRINTER;STATUS:BUSY;" ""
Here is the error.log from CUPS:
# cat /var/log/cups/error_log
E [21/Jan/2015:19:04:38 +0100] [cups-deviced] PID 18679 (dnssd) stopped
with status 1!
E [21/Jan/2015:19:05:03 +0100] [cups-deviced] PID 15727 (dnssd) stopped
with status 1!
E [21/Jan/2015:19:07:47 +0100] [cups-deviced] PID 32424 (dnssd) stopped
with status 1!
E [21/Jan/2015:19:10:17 +0100] [cups-deviced] PID 20718 (dnssd) stopped
with status 1!
E [21/Jan/2015:20:10:46 +0100] [cups-deviced] PID 28822 (dnssd) stopped
with status 1!
E [21/Jan/2015:22:32:35 +0100] [cups-deviced] PID 9479 (dnssd) stopped
with status 1!
E [21/Jan/2015:22:33:05 +0100] [cups-deviced] PID 22373 (dnssd) stopped
with status 1!
E [25/Jan/2015:21:25:02 +0100] [cups-deviced] PID 12030 (dnssd) stopped
with status 1!
E [25/Jan/2015:21:30:18 +0100] [cups-deviced] PID 19567 (dnssd) stopped
with status 1!
E [25/Jan/2015:21:31:03 +0100] [cups-deviced] PID 12766 (dnssd) stopped
with status 1!
E [25/Jan/2015:21:36:08 +0100] [cups-deviced] PID 27817 (dnssd) stopped
with status 1!
E [25/Jan/2015:21:40:54 +0100] [cups-deviced] PID 22098 (dnssd) stopped
with status 1!
E [26/Jan/2015:10:16:27 +0100] [cups-deviced] PID 6356 (dnssd) stopped
with status 1!
E [26/Jan/2015:10:17:40 +0100] [cups-deviced] PID 29329 (dnssd) stopped
with status 1!
E [26/Jan/2015:10:24:19 +0100] [cups-deviced] PID 3869 (dnssd) stopped
with status 1!
E [26/Jan/2015:10:40:47 +0100] [cups-deviced] PID 16580 (dnssd) stopped
with status 1!
E [26/Jan/2015:10:41:31 +0100] [cups-deviced] PID 22541 (dnssd) stopped
with status 1!
E [26/Jan/2015:10:54:49 +0100] [cups-deviced] PID 31656 (dnssd) stopped
with status 1!
dmesg output:
ulpt0 at uhub0 port 6 configuration 1 interface 0 "Samsung Electronics
Co., Ltd. CLP-310 Series" rev 2.00/1.00 addr 3
ulpt0: using bi-directional mode
Not sure if it's related to dnssd, so I hope somebody of you could help
me :)
Cheers,
Stephan
