I'm looking under /var/log, but not seeing any logfiles to give me any clues.
What information should I post? I have /var/log/messages from the
moment of the crash, but it's about 36K.
dmesg:
---------------
OpenBSD 5.5-stable (GENERIC) #0: Sat Dec 13 14:38:02 JST 2014
r...@ob.reiisi.homedns.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) 2600+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.84 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MPC,MMXX,3DNOW2,3DNOW
real mem = 737636352 (703MB)
avail mem = 713281536 (680MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/28/04, BIOS32 rev. 0 @
0xfbaa0, SMBIOS rev. 2.3 @ 0xf0800 (33 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 07/28/2004
bios0: MICRO-STAR INTERNATIONAL CO., LTD KM266-8237
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices SLPB(S5) USB0(S1) USB1(S1) USB2(S1) USB3(S1)
USB4(S1) USB5(S1) USB6(S1) USB7(S1) LAN0(S5) UAR1(S5) LPT1(S5)
ECP1(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 333MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
bios0: ROM list: 0xc0000/0x7e00 0xc8000/0x1a00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 7 function 0 "ITExpress IT8212F" rev 0x13: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 6B160P0>
wd0: 16-sector PIO, LBA48, 156334MB, 320173056 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD3200AAJB-00J3A0>
wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 0
pciide1 at pci0 dev 15 function 0 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd2 at pciide1 channel 0 drive 0: <Maxtor 4R080L0>
wd2: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd2(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-H552A, BA52> ATAPI
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 3
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00: SMI
iic0 at viapm0
iic0: addr 0x2f 00=00 01=07 02=00 03=00 04=07 05=00 06=00 07=00 14=14
15=62 16=03 17=02 words 00=00ff 01=07ff 02=00ff 03=00ff 04=07ff
05=00ff 06=00ff 07=00ff
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2700CL2.5
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: apic 2 int 22
ac97: codec id 0x56494170 (VIA Technologies VT1617)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: apic 2 int 23,
address 00:11:09:b4:08:41
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI
0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pciide0:0:1: read intr before drq
wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying
wd1: soft error (corrected)
umass0 at uhub0 port 6 configuration 1 interface 0 "USB2.0 CardReader"
rev 2.00/91.44 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <USB2.0, CF CardReader, 9144> SCSI0
0/direct removable
sd1 at scsibus1 targ 1 lun 1: <USB2.0, SM CardReader, 9144> SCSI0
0/direct removable
sd2 at scsibus1 targ 1 lun 2: <USB2.0, SD CardReader, 9144> SCSI0
0/direct removable
sd3 at scsibus1 targ 1 lun 3: <USB2.0, MS CardReader, 9144> SCSI0
0/direct removable
uhidev0 at uhub1 port 1 configuration 1 interface 0 "ELECOM ELECOM USB
mouse with wheel" rev 1.10/0.30 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd2a (85f3c23fe413c2b0.a) swap on wd2b dump on wd2b
WARNING: / was not properly unmounted
-----------------------
--
Joel Rees
Be careful when you look at conspiracy.
Look first in your own heart,
and ask yourself if you are not your own worst enemy.
Arm yourself with knowledge of yourself, as well.
