Also worth a mention is that only one core is enabled(no smp) and that one core that is active works at 792Mzh and not 1.2 Ghz. On Jan 11, 2015 5:03 PM, "Patrick Wildt" <m...@patrick-wildt.de> wrote:
> > > Am 11.01.2015 um 14:27 schrieb Christer Solskogen < > christer.solsko...@gmail.com>: > > > > On Mon, Jan 5, 2015 at 10:31 AM, f5b <f...@163.com> wrote: > >> according > >> > http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/arch/armv7/armv7/armv7.c?rev =1.4 > >> > >> > >> Only one board supported in current with two Gigabit ports ,Compulab > UTILITE box ? > >> Anyone can make sure? > > > > OpenBSD still does not boot on that board. Bitrig boots fine. > > (used snapshot from 10th of january) > > > > -- > > chs > > > > One Port is limited to 540MBit/s by design. The other one is connected to > the PCIe 1x > slot which I still cannot get to run properly. > > It detects the device easily, but âtalkingâ to it doesnât work. It looks > like thereâs some kind > of DMA issue I havenât figured out. > > Otherwise that device runs great here. Iâm using it as build machine, with > the in-built > SSD.
