Try changing the value for the sysctl variable "kern.timecounter.hardware"? Its just a guess, but its helped me when I had problems with the clock before.
On Fri, Jan 2, 2015 at 7:47 AM, John Merriam <j...@johnmerriam.net> wrote: > Hello. I have a strange issue with OpenBSD on my Dell OptiPlex 320. The > clock doesn't move: > > # date; sleep 55; date > Thu Jan 1 02:25:47 EST 2015 > Thu Jan 1 02:25:47 EST 2015 > > I see the same behavior with 5.6-release amd64 and -current amd64. The > clock works fine in Windows and Linux on this machine. I installed the > December 27th snapshot on it so I can mess around with it and try to get it > fixed. Has anyone seen this before? If not, any tips on what to try or > where I should start looking in the code to try to figure out what's going > on? > > Below is the dmesg: > > OpenBSD 5.6-current (GENERIC.MP) #735: Sat Dec 27 13:55:58 MST 2014 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 3437608960 (3278MB) > avail mem = 3342295040 (3187MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (68 entries) > bios0: vendor Dell Inc. version "1.1.12" date 06/17/2009 > bios0: Dell Inc. OptiPlex 320 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP SSDT APIC BOOT MCFG HPET SLIC SSDT SSDT SSDT > acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI7(S5) MAC1(S5) MOU_(S3) USB0(S3) > USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz, 2000.36 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF > cpu0: 2MB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 200MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.0.0, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz, 2000.08 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF > cpu1: 2MB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 21, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 8 > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 1 (PCI1) > acpiprt1 at acpi0: bus -1 (PCI2) > acpiprt2 at acpi0: bus -1 (PCI3) > acpiprt3 at acpi0: bus -1 (PCI4) > acpiprt4 at acpi0: bus -1 (PCI5) > acpiprt5 at acpi0: bus -1 (PCI6) > acpiprt6 at acpi0: bus -1 (PCI8) > acpiprt7 at acpi0: bus 2 (PCI7) > acpiprt8 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0: PSS > acpicpu1 at acpi0: PSS > acpibtn0 at acpi0: VBTN > cpu0: Enhanced SpeedStep 2000 MHz: speeds: 2000, 1600, 1200 MHz > pci0 at mainbus0 bus 0 > 0:20:0: mem address conflict 0xfed00000/0x400 > pchb0 at pci0 dev 0 function 0 "ATI RC410 Host" rev 0x01 > ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00 > pci1 at ppb0 bus 1 > radeondrm0 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00 > drm0 at radeondrm0 > radeondrm0: apic 8 int 17 > ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 8 int 23, > AHCI 1.1 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD5000AACS-0, 05.0> SCSI3 0/direct > fixed naa.50014ee201ce1451 > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > cd0 at scsibus1 targ 1 lun 0: <PBDS, CDRWDVD DH-48C2S, ND11> ATAPI 5/cdrom > removable > ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 8 int 16, > version 1.0, legacy support > ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 8 int 17, > version 1.0, legacy support > ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 8 int 18, > version 1.0, legacy support > ohci3 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 8 int 17, > version 1.0, legacy support > ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 8 int 18, > version 1.0, legacy support > ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 8 int 19 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x13: SMI > iic0 at piixpm0 > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 > spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-5300CL5 > pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, channel 0 > configured to compatibility, channel 1 configured to compatibility > azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 8 int > 16 > azalia0: codecs: Analog Devices AD1983 > audio0 at azalia0 > pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00 > ppb1 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 > pci2 at ppb1 bus 2 > rl0 at pci2 dev 2 function 0 "Realtek 8139" rev 0x10: apic 8 int 22, address > 00:40:f4:6c:99:b2 > rlphy0 at rl0 phy 0: RTL internal PHY > bce0 at pci2 dev 9 function 0 "Broadcom BCM4401B1" rev 0x02: apic 8 int 21, > address 00:1d:09:16:ca:2e > bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci2: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci3: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci4: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech Optical USB > Mouse" rev 2.00/3.40 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhub6 at uhub1 port 2 "Dell Dell USB Keyboard Hub" rev 1.10/48.01 addr 3 > uhidev1 at uhub6 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard > Hub" rev 1.10/48.00 addr 4 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > uhidev2 at uhub6 port 1 configuration 1 interface 1 "Dell Dell USB Keyboard > Hub" rev 1.10/48.00 addr 4 > uhidev2: iclass 3/0, 3 report ids > uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 > uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0 > uhid2 at uhidev2 reportid 3: input=3, output=0, feature=0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (387205e18729d3cc.a) swap on sd0b dump on sd0b > drm: initializing kernel modesetting (RS400 0x1002:0x5A61 0x1028:0x01E5). > radeondrm0: VRAM: 32M 0x00000000CE000000 - 0x00000000CFFFFFFF (32M used) > radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF > drm: PCIE GART of 512M enabled (table at 0x00000000CCD8B000). > error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load > firmware "radeon-r300_cp" > error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware! > error: [drm:pid0:rs400_startup] *ERROR* failed initializing CP (-2). > error: [drm:pid0:rs400_init] *ERROR* Disabling GPU acceleration > drm: radeon: cp finalized > radeondrm0: 1280x1024 > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > -- > > John Merriam
