Hello,
I tried to install a recent snapshot on an old computer I have and I
saw that keyboard is not detected anymore and it is not usable. In
previous installs I had no problems. Was install kernel modified
recently? I attached and old dmesg and usbdevs output. Thank you.
OpenBSD 5.6-current (GENERIC) #348: Mon Oct 6 12:36:43 MDT 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,xTPR,PERF
real mem = 1072132096 (1022MB)
avail mem = 1042235392 (993MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/21/08, BIOS32 rev. 0 @
0xfd6dc, SMBIOS rev. 2.34 @ 0xefc30 (52 entries)
bios0: vendor IBM version "2BKT53AUS" date 01/21/2008
bios0: IBM 814438G
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP TCPA APIC BOOT MCFG
acpi0: wakeup devices EXP0(S5) EXP1(S5) EXP2(S5) EXP3(S5) USB1(S3)
USB2(S3) USB3(S3) USB4(S3) USBE(S3) SLOT(S5) KBC_(S3) PSM_(S3)
COMA(S5) COMB(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-9
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG_)
acpiprt2 at acpi0: bus -1 (EXP0)
acpiprt3 at acpi0: bus -1 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus -1 (EXP3)
acpiprt6 at acpi0: bus 10 (SLOT)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 105 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xf600 0xe0000/0x10000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915G Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82915G PCIE" rev 0x04: apic 1 int 16
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon X1650 Pro" rev 0x9e
drm0 at radeondrm0
radeondrm0: msi
"ATI Radeon X1650 Pro Sec" rev 0x9e at pci1 dev 0 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 10
bge0 at pci2 dev 11 function 0 "Broadcom BCM5705K" rev 0x03, BCM5705
A3 (0x3003): apic 1 int 16, address 00:11:25:f6:32:36
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1
int 17, ICH6 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVD-RW DVR-116D, 1.09> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD3200AAKS-00G3A0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: apic 1 int 19
iic0 at ichiic0
adt0 at iic0 addr 0x2e: lm96000 rev 0x68
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC3200CL3.0
spdmem2 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC3200CL3.0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "SIGMACH1P USB
Keykoard" rev 1.10/1.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub2 port 2 configuration 1 interface 1 "SIGMACH1P USB
Keykoard" rev 1.10/1.10 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (4358408422a68b86.a) swap on wd0b dump on wd0b
drm: initializing kernel modesetting (RV530 0x1002:0x71C7 0x1787:0x3000).
radeondrm0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeondrm0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
drm: PCIE GART of 512M enabled (table at 0x0000000000040000).
drm: Possible lm63 thermal controller at 0x4c
radeondrm0: 1680x1050
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
$ usbdevs -vd
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub0
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub1
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub2
port 1 powered
port 2 addr 2: low speed, power 98 mA, config 1, USB
Keykoard(0x000e), SIGMACH1P(0x1c4f), rev 1.10
uhidev0
uhidev1
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub3
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub4
port 1 powered
port 2 powered
