> Proving a dmesg to the list would be a good start
gladly.
OpenBSD 3.8 (GENERIC) #1: Fri Dec 9 11:16:35 CST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/NIBBLER
cpu0: Intel(R) Pentium(R) M processor 1.10GHz ("GenuineIntel" 686-class) 1.10
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 1100 MHz (940 mV): speeds: 1100, 1000, 900, 800, 600
MHz
real mem = 1063821312 (1038888K)
avail mem = 964878336 (942264K)
using 4278 buffers containing 53293056 bytes (52044K) of memory
mainbus0 (root)
acpi0 at mainbus0: revision 0 attached
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table BOOT not configured
bios0 at mainbus0: AT/286+(1b) BIOS, date 09/01/04, BIOS32 rev. 0 @ 0xfd720
pcibios0 at bios0: rev 2.1 @ 0xfd720/0x8e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xd200! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xd8000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
cbb0 at pci1 dev 10 function 0 "Ricoh 5C476 CardBus" rev 0xab: irq 11
cbb1 at pci1 dev 10 function 1 "Ricoh 5C476 CardBus" rev 0xab: irq 11
"Ricoh 5C552 Firewire" rev 0x03 at pci1 dev 10 function 2 not configured
vendor "Ricoh", unknown product 0x0576 (class system subclass miscellaneous,
rev 0x01) at pci1 dev 10 function 3 not configured
vendor "Ricoh", unknown product 0x0592 (class system subclass miscellaneous,
rev 0x00) at pci1 dev 10 function 4 not configured
rl0 at pci1 dev 12 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:0b:5d:74:06:ec
rlphy0 at rl0 phy 0: RTL internal phy
iwi0 at pci1 dev 13 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11,
address 00:0e:35:a3:ae:17
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03: failed to map
I/O space
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2040AT>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA755 DVD/CDRW, 1.00> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801DB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 11, ICH4
AC97
ac97: codec id 0x414c4770 (Avance Logic ALC203)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask edfd netmask edfd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uplcom0 at uhub0 port 2
uplcom0: Prolific Technology PL2303 Serial, rev 1.10/2.02, addr 2
ucom0 at uplcom0
