On 09/19/14 01:42, Steve Litt wrote: ... > Very, very nice! Two questions: > > 1) Can I safely assume that the Realtek RTL8111E works well with > OpenBSD? > > 2) Where's the best place to buy it if you live in the US? I saw this, > which looks pretty good, given that they give you the enclosure (and > I presume the heat spreader) and a wall wort: > http://store.netgate.com/kit-APU1C4.aspx > > I've been looking for something like this for a long time. Thanks! >
is anybody else using this recent BIOS snapshot on the APU.1c: Build 9/8/2014 (beta, reduced "spew level") The first re(4) interface isn't always recognized after reboot. I don't know if it's related to the BIOS update since I didn't play much with this board when I still had the BIOS beta from April flashed. I've seen this re0-related problem multiple times with an OpenBSD snapshot from April and also with a newer snapshot from September. The kernel sometimes also freezes at ehci0 (see attachment). So, at least my APU.1c device doesn't work reliably at all. I was thinking about getting one of these (hopefully low-power) Supermicro boards: Atom N2800-based: http://www.supermicro.com/products/motherboard/ATOM/X9/X9SCAA-L.cfm Atom S1260-based: http://www.supermicro.com/products/motherboard/ATOM/X9/X9SBAA-F.cfm http://www.supermicro.com/products/motherboard/ATOM/X9/X9SBAA.cfm Atom C2xxx-based: http://www.supermicro.com/products/motherboard/Atom/X10/A1SRi-2558F.cfm http://www.supermicro.com/products/motherboard/Atom/X10/A1SAi-2550F.cfm Celeron J1900-based: http://www.supermicro.com/products/motherboard/celeron/X10/X10SBA-L.cfm Does anybody have experience with one of the boards from above on OpenBSD? Best regards Andreas OpenBSD 5.6-current (GENERIC.MP) #372: Wed Sep 10 18:03:54 MDT 2014 t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4246003712 (4049MB) avail mem = 4124246016 (3933MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdf16d820 (7 entries) bios0: vendor coreboot version "4.0" date 09/08/2014 bios0: PC Engines APU acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SPCR HPET APIC HEST SSDT SSDT SSDT acpi0: wakeup devices AGPB(S4) HDMI(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PE20(S4) PE21(S4) PE22(S4) PE23(S4) PIBR(S4) UOH1(S3) UOH2(S3) UOH3(S3) UOH4(S3) UOH5(S3) [...] acpitimer0 at acpi0: 3579545 Hz, 32 bits acpihpet0 at acpi0: 14318180 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD G-T40E Processor, 1000.14 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD G-T40E Processor, 1000.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu1: 8 4MB entries fully associative cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins acpiprt0 at acpi0: bus -1 (AGPB) acpiprt1 at acpi0: bus -1 (HDMI) acpiprt2 at acpi0: bus 1 (PBR4) acpiprt3 at acpi0: bus 2 (PBR5) acpiprt4 at acpi0: bus 3 (PBR6) acpiprt5 at acpi0: bus -1 (PBR7) acpiprt6 at acpi0: bus 5 (PE20) acpiprt7 at acpi0: bus -1 (PE21) acpiprt8 at acpi0: bus -1 (PE22) acpiprt9 at acpi0: bus -1 (PE23) acpiprt10 at acpi0: bus 0 (PCI0) acpiprt11 at acpi0: bus 4 (PIBR) acpicpu0 at acpi0: C2, PSS acpicpu1 at acpi0: C2, PSS acpibtn0 at acpi0: PWRB cpu0: 1000 MHz: speeds: 1000 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00 ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), msi, address 00:0d:b9:33:9b:f8 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4 ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi pci2 at ppb1 bus 2 re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), msi, address 00:0d:b9:33:9b:f9 rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 4 ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi pci3 at ppb2 bus 3 re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), msi, address 00:0d:b9:33:9b:fa rgephy2 at re2 phy 7: RTL8169S/8110S PHY, rev. 4 ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, AHCI 1.2 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, SuperSSpeed S328, V462> SCSI3 0/direct fixed t10.ATA_SuperSSpeed_S328_16GB__YTAC140301116_ sd0: 15258MB, 512 bytes/sector, 31248704 sectors, thin ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00 <hangs>
