Hi,
I'm trying apply trunk(4) on my secondary firewall and although I'm
using the same configuration as the primary firewall or other systems I
use with trunk I have problems failover on the slave port. Here is my
config:
# cat hostname.bge0
up
# cat hostname.bge1
up
# cat hostname.trunk0
up
trunkproto failover trunkport bge0 trunkport bge1
# cat hostname.vlan8
up description TEST_VLAN
#inet 10.1.100.3 255.255.255.0 NONE vlan 8 vlandev trunk0 -inet6
vlan 8 vlandev trunk0
# cat hostname.carp8
vhid 8 advskew 100 pass
iwqnKXdj0fd52g0oVoF8bnXUhgYPUGzq32PEoFva5LFhPvL6mZXolbcGPgFdrEOY carpdev vlan8
inet 10.1.100.1 255.255.255.0 NONE description TEST -inet6
The trunk works with bge0 as master,active.
If I do
# ifconfig bge0 down
then failover on bge1 does not happen. It is marked as active but I have no
network at all.
Ports are connected on different switches. However it is not a switch problem
since I've switched cables between bge0 and bge1 and had the exact same results.
Both ports have tagged VLANs on. Maybe a problem of native vlan?
pf also not a problem cause I've tried also with pf -d
Thanks for any help
Giannis
ps. Since it does not work, I've switched to plain bge0-External /
bge1-Internal setup right now.
OpenBSD 5.6-current (GENERIC.MP) #321: Fri Aug 29 16:55:53 MDT 2014
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem = 2145804288 (2046MB)
avail mem = 2098319360 (2001MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/10/07, BIOS32 rev. 0 @ 0xfd680, SMBIOS
rev. 2.34 @ 0x7feee000 (53 entries)
bios0: vendor FUJITSU SIEMENS // Phoenix Technologies Ltd. version "4.06 Rev.
1.07.2532" date 05/10/2007
bios0: FUJITSU SIEMENS PRIMERGY RX100 S4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP SPCR MCFG APIC BOOT
acpi0: wakeup devices PEXA(S4) PEXB(S4) PXH0(S4) PEXC(S4) PEXD(S4) PCIH(S4)
USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) KEYB(S4) PS2M(S4) COM1(S1) COM2(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-14
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfec10000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 10 (PEXA)
acpiprt2 at acpi0: bus 1 (PEXB)
acpiprt3 at acpi0: bus 2 (PXH0)
acpiprt4 at acpi0: bus 7 (PEXC)
acpiprt5 at acpi0: bus 9 (PEXD)
acpiprt6 at acpi0: bus 15 (PCIH)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep disabled by BIOS
memory map conflict 0xfff00000/0x100000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0xc0
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0: apic 2 int 16
pci1 at ppb0 bus 10
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17
pci2 at ppb1 bus 1
ppb2 at pci2 dev 0 function 0 "Intel 6702PXH PCIE-PCIX" rev 0x09
pci3 at ppb2 bus 2
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 int 17
pci4 at ppb3 bus 7
ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci5 at ppb4 bus 8
bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003):
apic 2 int 16, address 00:0a:e4:84:41:a5
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003):
apic 2 int 17, address 00:0a:e4:84:41:a4
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 int 16
pci6 at ppb5 bus 9
vga1 at pci6 dev 0 function 0 "Matrox MGA G200e" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 21
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 20
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci7 at ppb6 bus 15
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T20N, WW01> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, ST3160815AS, 3.AA> SCSI3 0/direct fixed
t10.ATA_ST3160815AS_6RX19ARP
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
sd1 at scsibus2 targ 1 lun 0: <ATA, ST3160815AS, 3.AA> SCSI3 0/direct fixed
t10.ATA_ST3160815AS_6RX1CX8C
sd1: 152627MB, 512 bytes/sector, 312581808 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed
sd2: 152625MB, 512 bytes/sector, 312576113 sectors
root on sd2a (aded2a972fcdcdc6.a) swap on sd2b dump on sd2b
carp: carp8 demoted group carp by 1 to 131 (carpdev)
carp: pfsync0 demoted group carp by 32 to 163 (pfsync init)
carp: pfsync0 demoted group pfsync by 32 to 32 (pfsync init)
carp: pfsync0 demoted group carp by 1 to 164 (pfsync bulk start)
carp: pfsync0 demoted group pfsync by 1 to 33 (pfsync bulk start)
carp: carp8 demoted group carp by -1 to 161 (carpdev)
carp: pfsync0 demoted group carp by -1 to 32 (pfsync bulk done)
carp: pfsync0 demoted group pfsync by -1 to 32 (pfsync bulk done)
carp: pfsync0 demoted group carp by -32 to 0 (pfsync init)
carp: pfsync0 demoted group pfsync by -32 to 0 (pfsync init)
carp: pfsync0 demoted group carp by 1 to 3 (pfsync link state down)
carp: pfsync0 demoted group pfsync by 1 to 1 (pfsync link state down)
carp: carp8 demoted group carp by 1 to 4 (carpdev)
carp: carp8 demoted group carp by -1 to 1 (carpdev)
carp: pfsync0 demoted group carp by -1 to 0 (pfsync link state up)
carp: pfsync0 demoted group pfsync by -1 to 0 (pfsync link state up)
carp8: state transition: BACKUP -> MASTER
carp8: state transition: MASTER -> BACKUP
