Jacob Meuser wrote:
> On Tue, Dec 06, 2005 at 08:53:00AM +0100, Ramiro Aceves wrote:
>
>>Hello.
>
>
> yo!
>
>
>>The system does not recognize my TV CARD tuner type out of the box, and
>>xawtv does not work. As I did not know if it was possible to configure
>>TV CARD with config(8), I tried to compile a kernel, so I started to
>
>
> it isn't poaaible to use config(8) to configure a bktr(4) device, but
> that would be nice. actually, it would be nicer not to have to do any
> manual configuration at all ...
Oh yes, of course, it would be great. I am new to OpenBSD, I have used
OpenBSD for 5 months or so. I was looking for some kind of configuration
in config(8), but I soon understood that it could not be done without
recompiling the kernel. :-(
<snip>
>
> I would like to see a dmesg from GENERIC. is this really an Askey?
> it looks like this should be detected by bktr by the PCI vendor ID.
I attach the GENERIC and GENERIC.REMIGIO dmesg`s at the end of this
email. The real problem was that it autodetected the wrong tuner.
>
>
>>Should I fill a bug report?
>
>
> adding CARD_ in front of all the names will mess up the nice
> formatting ;)
>
> but, yes, this should be clarified.
>
> and btw, BKTR_SYSTEM_DEFAULT=BROOKTREE_PAL is the default.
>
Nice to now that PAL is the default. I used that sentence just to be sure.
I am happy to help with any tests you need.
Ramiro.
********************* GENERIC ***************************************
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) processor ("AuthenticAMD" 686-class, 256KB L2
cache) 1.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 536387584 (523816K)
avail mem = 482533376 (471224K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(9c) BIOS, date 11/30/01, BIOS32 rev. 0 @ 0xfb1f0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb670
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc00/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "VIA VT8363 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia Vanta" rev 0x15
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x40
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3160021A>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1 at pciide0 channel 0 drive 1: <ST340810A>
wd1: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8161B, 0102> SCSI0
5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4160B, A302> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x1a: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x1a: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40
eap0 at pci0 dev 10 function 0 "Ensoniq CT5880" rev 0x02: irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
rl0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:02:44:59:f1:70
rlphy0 at rl0 phy 0: RTL internal phy
bktr0 at pci0 dev 14 function 0 "Brooktree BT878" rev 0x11: irq 5
bktr0: Askey/Dynalink Magic TView, Temic NTSC tuner.
"Brooktree BT878 Audio" rev 0x11 at pci0 dev 14 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e765 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 2
uhub2: ALCOR Generic USB Hub, rev 1.10/3.12, addr 2
uhub2: 4 ports with 4 removable, self powered
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <USB 2.0, Flash Disk, 0.00> SCSI2 0/direct
removable
sd0: 250MB, 250 cyl, 64 head, 32 sec, 512 bytes/sec, 512000 sec total
dkcsum: wd0 matches BIOS drive 0x80
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
*****************************************************************
******************* GENERIC.REMIGIO ***************************
OpenBSD 3.8 (GENERIC.REMIGIO) #0: Mon Dec 5 19:46:08 CET 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.REMIGIO
cpu0: AMD Athlon(tm) processor ("AuthenticAMD" 686-class, 256KB L2
cache) 1.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 536387584 (523816K)
avail mem = 482537472 (471228K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(9c) BIOS, date 11/30/01, BIOS32 rev. 0 @ 0xfb1f0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb670
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc00/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "VIA VT8363 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia Vanta" rev 0x15
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x40
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3160021A>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1 at pciide0 channel 0 drive 1: <ST340810A>
wd1: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8161B, 0102> SCSI0
5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4160B, A302> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x1a: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x1a: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40
eap0 at pci0 dev 10 function 0 "Ensoniq CT5880" rev 0x02: irq 5
eap0: eap1371_read_codec timeout 2
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
rl0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:02:44:59:f1:70
rlphy0 at rl0 phy 0: RTL internal phy
bktr0 at pci0 dev 14 function 0 "Brooktree BT878" rev 0x11: irq 5
bktr0: Askey/Dynalink Magic TView, Philips FR1216 PAL FM tuner.
radio0 at bktr0
"Brooktree BT878 Audio" rev 0x11 at pci0 dev 14 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e765 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 2
uhub2: ALCOR Generic USB Hub, rev 1.10/3.12, addr 2
uhub2: 4 ports with 4 removable, self powered
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <USB 2.0, Flash Disk, 0.00> SCSI2 0/direct
removable
sd0: 250MB, 250 cyl, 64 head, 32 sec, 512 bytes/sec, 512000 sec total
dkcsum: wd0 matches BIOS drive 0x80
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
***********************************************************
