What switch do you have?
"advbase 20” and "advskew 100” means that you’ll have to wait 20+ sec in order
to see announcement in tcpdump.
Are you sure you have waited enough?
//mxb
On 14 aug 2014, at 16:37, Stefan Olsson <stur...@hotmail.com> wrote:
> Hi Misc,
> I am having problems with setting up a pair of firewalls (Soekris 6501-70 with
> an extra lan1841 quad-card, i.e. total 8 em-ports) - I can not get CARP to
> work - both firewalls insist on becoming Master. I did have it working a week
> or two ago, since then I've been working on the rulesets and have updated to
> current snapshots several times, latest was last night. I've been thinking it
> was the rulesets that prevented the carp-traffic somehow, but even with pf
> turned off the carp announcements doesn't seem to be transmitted on the
> em-port.
> In order to isolate the problem I've turned on tcpdump in one session:
> # tcpdump -vvv -i em7 proto carp
> and then in another session I've done the following# pfctl -d# ifconfig carp7
> down# ifconfig carp7 up
> -Should I not see some carp-traffic in the tcpdump-session? -I don't see any
> carp-traffic there, so I am starting to wonder whether something has changed
> with em-driver and/or carp in current?
> -----------------------------------------------------------------------------
> -------------------------# ifconfig carp7
>
>
>
>
>
>
>
> carp7:
> flags=28843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NOINET6> mtu 1500
> lladdr 00:00:5e:00:01:01
> description: ISP
> priority: 0
> carp: MASTER carpdev em7 vhid 1 advbase 20 advskew 100
> groups: carp
> status: master
> inet X.X.X.116 netmask 0xfffffff0 broadcast X.X.X.127
> # ifconfig em7
>
>
>
>
>
>
>
>
> em7:
> flags=28b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,NOINET6>
> mtu 1500
> lladdr 00:00:24:d0:de:03
> description: ISP
> priority: 0
> groups: egress
> media: Ethernet autoselect
> (1000baseT full-duplex,rxpause,txpause)
> status: active
> inet
> X.X.X.125 netmask 0xfffffff0 broadcast X.X.X.127
> # dmesg
>
>
>
>
>
>
>
>
> sdhc0 at pci2 dev 4 function 0 "Intel EG20T SDIO" rev 0x01:
> apic 0 int 18
> sdmmc0 at sdhc0
> sdhc1 at pci2 dev 4 function 1 "Intel EG20T
> SDIO" rev 0x01: apic 0 int 18
> sdmmc1 at sdhc1
> ahci0 at pci2 dev 6 function 0
> "Intel EG20T AHCI" rev 0x02: msi, AHCI 1.1
> scsibus1 at ahci0: 32 targets
> sd0
> at scsibus1 targ 0 lun 0: <ATA, TS4GMSA500, 2012> SCSI3 0/direct fixed
> t10.ATA_TS4GMSA500_20140403B37910026705
> sd0: 3775MB, 512 bytes/sector, 7732368
> sectors
> ohci3 at pci2 dev 8 function 0 "Intel EG20T USB" rev 0x02: apic 0 int
> 16, version 1.0
> ohci4 at pci2 dev 8 function 1 "Intel EG20T USB" rev 0x02:
> apic 0 int 16, version 1.0
> ohci5 at pci2 dev 8 function 2 "Intel EG20T USB"
> rev 0x02: apic 0 int 16, version 1.0
> ehci1 at pci2 dev 8 function 3 "Intel
> EG20T USB" rev 0x02: apic 0 int 16
> usb1 at ehci1: USB revision 2.0
> uhub1 at
> usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> "Intel EG20T DMA" rev 0x00 at
> pci2 dev 10 function 0 not configured
> puc0 at pci2 dev 10 function 1 "Intel
> EG20T Serial" rev 0x01: ports: 1 com
> com4 at puc0 port 0 apic 0 int 19:
> ti16750, 64 byte fifo
> puc1 at pci2 dev 10 function 2 "Intel EG20T Serial" rev
> 0x00: ports: 1 com
> com5 at puc1 port 0 apic 0 int 19: ti16750, 64 byte fifo
> puc2 at pci2 dev 10 function 3 "Intel EG20T Serial" rev 0x00: ports: 1 com
> com6 at puc2 port 0 apic 0 int 19: ti16750, 64 byte fifo
> puc3 at pci2 dev 10
> function 4 "Intel EG20T Serial" rev 0x00: ports: 1 com
> com7 at puc3 port 0
> apic 0 int 19: ti16750, 64 byte fifo
> "Intel EG20T DMA" rev 0x00 at pci2 dev 12
> function 0 not configured
> "Intel EG20T SPI" rev 0x00 at pci2 dev 12 function 1
> not configured
> "Intel EG20T I2C" rev 0x00 at pci2 dev 12 function 2 not
> configured
> "Intel EG20T CAN" rev 0x00 at pci2 dev 12 function 3 not configured
> "Intel EG20T 1588" rev 0x01 at pci2 dev 12 function 4 not configured
> usb2 at
> ohci0: USB revision 1.0
> uhub2 at usb2 "Intel OHCI root hub" rev 1.00/1.00 addr
> 1
> usb3 at ohci1: USB revision 1.0
> uhub3 at usb3 "Intel OHCI root hub" rev
> 1.00/1.00 addr 1
> usb4 at ohci2: USB revision 1.0
> uhub4 at usb4 "Intel OHCI
> root hub" rev 1.00/1.00 addr 1
> usb5 at ohci3: USB revision 1.0
> uhub5 at usb5
> "Intel OHCI root hub" rev 1.00/1.00 addr 1
> usb6 at ohci4: USB revision 1.0
> uhub6 at usb6 "Intel OHCI root hub" rev 1.00/1.00 addr 1
> usb7 at ohci5: USB
> revision 1.0
> uhub7 at usb7 "Intel OHCI root hub" rev 1.00/1.00 addr 1
> ppb2 at
> pci0 dev 24 function 0 "Intel E600 PCIE" rev 0x00
> pci3 at ppb2 bus 3
> ppb3 at
> pci3 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
> pci4 at ppb3 bus 4
> ppb4 at pci4
> dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
> pci5 at ppb4 bus 5
> em0 at pci5 dev 0
> function 0 "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:cd:c4
> ppb5 at
> pci4 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
> pci6 at ppb5 bus 6
> em1 at pci6
> dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:cd:c5
> ppb6
> at pci4 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
> pci7 at ppb6 bus 7
> ppb7 at
> pci0 dev 25 function 0 "Intel E600 PCIE" rev 0x00
> pci8 at ppb7 bus 8
> ppb8 at
> pci8 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
> pci9 at ppb8 bus 9
> ppb9 at pci9
> dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
> pci10 at ppb9 bus 10
> em2 at pci10
> dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:cd:c6
> ppb10
> at pci9 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
> pci11 at ppb10 bus 11
> em3 at
> pci11 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:cd:c7
> ppb11 at pci9 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
> pci12 at ppb11 bus 12
> ppb12 at pci0 dev 26 function 0 "Intel E600 PCIE" rev 0x00
> pci13 at ppb12 bus
> 13
> ppb13 at pci13 dev 0 function 0 "IDT 89HPES5T5ZB" rev 0x0e
> pci14 at ppb13
> bus 14
> ppb14 at pci14 dev 2 function 0 "IDT 89HPES5T5ZB" rev 0x0e
> pci15 at
> ppb14 bus 15
> em4 at pci15 dev 0 function 0 "Intel 82574L" rev 0x00: msi,
> address 00:00:24:d0:de:00
> ppb15 at pci14 dev 3 function 0 "IDT 89HPES5T5ZB"
> rev 0x0e
> pci16 at ppb15 bus 16
> em5 at pci16 dev 0 function 0 "Intel 82574L"
> rev 0x00: msi, address 00:00:24:d0:de:01
> ppb16 at pci14 dev 4 function 0 "IDT
> 89HPES5T5ZB" rev 0x0e
> pci17 at ppb16 bus 17
> em6 at pci17 dev 0 function 0
> "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:de:02
> ppb17 at pci14 dev 5
> function 0 "IDT 89HPES5T5ZB" rev 0x0e
> pci18 at ppb17 bus 18
> em7 at pci18 dev 0
> function 0 "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:de:03
> tcpcib0 at
> pci0 dev 31 function 0 "Intel E600 LPC" rev 0x00: 14318179 Hz timer, watchdog
> isa0 at tcpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ti16750, 64
> byte fifo
> com0: console
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0
> port 0xf0/16: reported by CPUID; using exception 16
> vscsi0 at root
> scsibus2 at
> vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root
> on sd0a (7ef8192bc80b13d0.a) swap on sd0b dump on sd0b
> carp: carp0 demoted
> group carp by 1 to 129 (carpdev)
> carp: carp7 demoted group carp by 1 to 130
> (carpdev)
> carp: pfsync0 demoted group carp by 32 to 162 (pfsync init)
> carp:
> pfsync0 demoted group pfsync by 32 to 32 (pfsync init)
> carp: pfsync0 demoted
> group carp by 1 to 163 (pfsync bulk start)
> carp: pfsync0 demoted group pfsync
> by 1 to 33 (pfsync bulk start)
> carp: carp0 demoted group carp by -1 to 162
> (carpdev)
> carp: carp7 demoted group carp by -1 to 161 (carpdev)
> carp0: state
> transition: BACKUP -> MASTER
> carp7: state transition: BACKUP -> MASTER
> carp:
> pfsync0 demoted group carp by -1 to 32 (pfsync bulk fail)
> carp: pfsync0
> demoted group pfsync by -1 to 32 (pfsync bulk fail)
> carp: pfsync0 demoted
> group carp by -32 to 0 (pfsync init)
> carp: pfsync0 demoted group pfsync by -32
> to 0 (pfsync init)
> pfsync: failed to receive bulk update
> carp: pfsync0 demoted
> group carp by 1 to 1 (pfsync link state down)
> carp: pfsync0 demoted group
> pfsync by 1 to 1 (pfsync link state down)
> carp: pfsync0 demoted group carp by
> -1 to 0 (pfsync bulk cancelled)
> carp: pfsync0 demoted group pfsync by -1 to 0
> (pfsync bulk cancelled)
> carp: pfsync0 demoted group carp by -1 to 0 (pfsync
> bulk cancelled)
> carp: pfsync0 demoted group pfsync by -1 to 0 (pfsync bulk
> cancelled)
> carp: pfsync0 demoted group carp by -1 to 0 (pfsync link state up)
> carp: pfsync0 demoted group pfsync by -1 to 0 (pfsync link state up)
> arp:
> attempt to overwrite entry for 192.168.1.1 on lo0 by 00:00:5e:00:01:01 on em0
> arp: attempt to overwrite entry for X.X.X.116 on lo0 by 00:00:5e:00:01:01 on
> em7
> arp: attempt to overwrite entry for 192.168.1.1 on lo0 by
> 00:00:5e:00:01:01 on em0
> arp: attempt to overwrite entry for X.X.X.116 on lo0
> by 00:00:5e:00:01:01 on em7
> carp0: state transition: BACKUP -> MASTER
> carp7:
> state transition: MASTER -> INIT
> carp0: state transition: MASTER -> INIT
> carp0: state transition: INIT -> BACKUP
> carp7: state transition: INIT ->
> BACKUP
> carp0: state transition: BACKUP -> MASTER
> carp7: state transition:
> BACKUP -> MASTER
> carp7: state transition: MASTER -> INIT
> carp0: state
> transition: MASTER -> INIT
> carp0: state transition: INIT -> BACKUP
> carp0:
> state transition: BACKUP -> MASTER
> carp0: state transition: MASTER -> INIT
> syncing disks... done
> carp: carp0 demoted group carp by 1 to 1 (carpdev)
> carp:
> carp7 demoted group carp by 1 to 2 (carpdev)
> OpenBSD 5.6 (GENERIC) #274: Fri
> Aug 8 00:05:13 MDT 2014
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Genuine
> Intel(R) CPU @ 1.60GHz ("GenuineIntel" 686-class) 1.61 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A
> CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST
> ,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
> real mem = 2146840576 (2047MB)
> avail mem = 2099326976 (2002MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 20/21/15, BIOS32 rev. 0
> @ 0xfac40
> mpbios0 at bios0: Intel MP Specification 1.4
> cpu0 at mainbus0: apid
> 0 (boot processor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed
> ranges
> cpu0: apic clock running at 99MHz
> cpu at mainbus0: not configured
> mpbios0: bus 0 is type PCI
> mpbios0: bus 64 is type ISA
> ioapic0 at
> mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
> pcibios0 at bios0: rev 2.0
> @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3880/96 (4
> entries)
> pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product
> 0x8186
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI
> bus #18 is the last bus
> bios0: ROM list: 0xc8000/0x2400 0xca800/0x4c00
> 0xcf800/0xee00
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x0614101b0600101b
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 1601
> MHz: speeds: 1600, 600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel E600 Host" rev 0x05
> pchb1 at pci0 dev 1
> function 0 "Intel E600 Config" rev 0x00
> ppb0 at pci0 dev 23 function 0 "Intel
> E600 PCIE" rev 0x00
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel
> EG20T PCIE" rev 0x01
> pci2 at ppb1 bus 2
> "Intel EG20T Packet Hub" rev 0x01 at
> pci2 dev 0 function 0 not configured
> "Intel EG20T Ethernet" rev 0x02 at pci2
> dev 0 function 1 not configured
> "Intel EG20T GPIO" rev 0x01 at pci2 dev 0
> function 2 not configured
> ohci0 at pci2 dev 2 function 0 "Intel EG20T USB" rev
> 0x02: apic 0 int 19, version 1.0
> ohci1 at pci2 dev 2 function 1 "Intel EG20T
> USB" rev 0x02: apic 0 int 19, version 1.0
> ohci2 at pci2 dev 2 function 2
> "Intel EG20T USB" rev 0x02: apic 0 int 19, version 1.0
> ehci0 at pci2 dev 2
> function 3 "Intel EG20T USB" rev 0x02: apic 0 int 19
> usb0 at ehci0: USB
> revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> "Intel
> EG20T USB Client" rev 0x02 at pci2 dev 2 function 4 not configured
> sdhc0 at
> pci2 dev 4 function 0 "Intel EG20T SDIO" rev 0x01: apic 0 int 18
> sdmmc0 at
> sdhc0
> sdhc1 at pci2 dev 4 function 1 "Intel EG20T SDIO" rev 0x01: apic 0 int
> 18
> sdmmc1 at sdhc1
> ahci0 at pci2 dev 6 function 0 "Intel EG20T AHCI" rev 0x02:
> msi, AHCI 1.1
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0:
> <ATA, TS4GMSA500, 2012> SCSI3 0/direct fixed
> t10.ATA_TS4GMSA500_20140403B37910026705
> sd0: 3775MB, 512 bytes/sector, 7732368
> sectors
> ohci3 at pci2 dev 8 function 0 "Intel EG20T USB" rev 0x02: apic 0 int
> 16, version 1.0
> ohci4 at pci2 dev 8 function 1 "Intel EG20T USB" rev 0x02:
> apic 0 int 16, version 1.0
> ohci5 at pci2 dev 8 function 2 "Intel EG20T USB"
> rev 0x02: apic 0 int 16, version 1.0
> ehci1 at pci2 dev 8 function 3 "Intel
> EG20T USB" rev 0x02: apic 0 int 16
> usb1 at ehci1: USB revision 2.0
> uhub1 at
> usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> "Intel EG20T DMA" rev 0x00 at
> pci2 dev 10 function 0 not configured
> puc0 at pci2 dev 10 function 1 "Intel
> EG20T Serial" rev 0x01: ports: 1 com
> com4 at puc0 port 0 apic 0 int 19:
> ti16750, 64 byte fifo
> puc1 at pci2 dev 10 function 2 "Intel EG20T Serial" rev
> 0x00: ports: 1 com
> com5 at puc1 port 0 apic 0 int 19: ti16750, 64 byte fifo
> puc2 at pci2 dev 10 function 3 "Intel EG20T Serial" rev 0x00: ports: 1 com
> com6 at puc2 port 0 apic 0 int 19: ti16750, 64 byte fifo
> puc3 at pci2 dev 10
> function 4 "Intel EG20T Serial" rev 0x00: ports: 1 com
> com7 at puc3 port 0
> apic 0 int 19: ti16750, 64 byte fifo
> "Intel EG20T DMA" rev 0x00 at pci2 dev 12
> function 0 not configured
> "Intel EG20T SPI" rev 0x00 at pci2 dev 12 function 1
> not configured
> "Intel EG20T I2C" rev 0x00 at pci2 dev 12 function 2 not
> configured
> "Intel EG20T CAN" rev 0x00 at pci2 dev 12 function 3 not configured
> "Intel EG20T 1588" rev 0x01 at pci2 dev 12 function 4 not configured
> usb2 at
> ohci0: USB revision 1.0
> uhub2 at usb2 "Intel OHCI root hub" rev 1.00/1.00 addr
> 1
> usb3 at ohci1: USB revision 1.0
> uhub3 at usb3 "Intel OHCI root hub" rev
> 1.00/1.00 addr 1
> usb4 at ohci2: USB revision 1.0
> uhub4 at usb4 "Intel OHCI
> root hub" rev 1.00/1.00 addr 1
> usb5 at ohci3: USB revision 1.0
> uhub5 at usb5
> "Intel OHCI root hub" rev 1.00/1.00 addr 1
> usb6 at ohci4: USB revision 1.0
> uhub6 at usb6 "Intel OHCI root hub" rev 1.00/1.00 addr 1
> usb7 at ohci5: USB
> revision 1.0
> uhub7 at usb7 "Intel OHCI root hub" rev 1.00/1.00 addr 1
> ppb2 at
> pci0 dev 24 function 0 "Intel E600 PCIE" rev 0x00
> pci3 at ppb2 bus 3
> ppb3 at
> pci3 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
> pci4 at ppb3 bus 4
> ppb4 at pci4
> dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
> pci5 at ppb4 bus 5
> em0 at pci5 dev 0
> function 0 "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:cd:c4
> ppb5 at
> pci4 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
> pci6 at ppb5 bus 6
> em1 at pci6
> dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:cd:c5
> ppb6
> at pci4 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
> pci7 at ppb6 bus 7
> ppb7 at
> pci0 dev 25 function 0 "Intel E600 PCIE" rev 0x00
> pci8 at ppb7 bus 8
> ppb8 at
> pci8 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
> pci9 at ppb8 bus 9
> ppb9 at pci9
> dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
> pci10 at ppb9 bus 10
> em2 at pci10
> dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:cd:c6
> ppb10
> at pci9 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
> pci11 at ppb10 bus 11
> em3 at
> pci11 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:cd:c7
> ppb11 at pci9 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
> pci12 at ppb11 bus 12
> ppb12 at pci0 dev 26 function 0 "Intel E600 PCIE" rev 0x00
> pci13 at ppb12 bus
> 13
> ppb13 at pci13 dev 0 function 0 "IDT 89HPES5T5ZB" rev 0x0e
> pci14 at ppb13
> bus 14
> ppb14 at pci14 dev 2 function 0 "IDT 89HPES5T5ZB" rev 0x0e
> pci15 at
> ppb14 bus 15
> em4 at pci15 dev 0 function 0 "Intel 82574L" rev 0x00: msi,
> address 00:00:24:d0:de:00
> ppb15 at pci14 dev 3 function 0 "IDT 89HPES5T5ZB"
> rev 0x0e
> pci16 at ppb15 bus 16
> em5 at pci16 dev 0 function 0 "Intel 82574L"
> rev 0x00: msi, address 00:00:24:d0:de:01
> ppb16 at pci14 dev 4 function 0 "IDT
> 89HPES5T5ZB" rev 0x0e
> pci17 at ppb16 bus 17
> em6 at pci17 dev 0 function 0
> "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:de:02
> ppb17 at pci14 dev 5
> function 0 "IDT 89HPES5T5ZB" rev 0x0e
> pci18 at ppb17 bus 18
> em7 at pci18 dev 0
> function 0 "Intel 82574L" rev 0x00: msi, address 00:00:24:d0:de:03
> tcpcib0 at
> pci0 dev 31 function 0 "Intel E600 LPC" rev 0x00: 14318179 Hz timer, watchdog
> isa0 at tcpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ti16750, 64
> byte fifo
> com0: console
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0
> port 0xf0/16: reported by CPUID; using exception 16
> vscsi0 at root
> scsibus2 at
> vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root
> on sd0a (7ef8192bc80b13d0.a) swap on sd0b dump on sd0b
> carp: carp0 demoted
> group carp by 1 to 129 (carpdev)
> carp: carp7 demoted group carp by 1 to 130
> (carpdev)
> carp: pfsync0 demoted group carp by 32 to 162 (pfsync init)
> carp:
> pfsync0 demoted group pfsync by 32 to 32 (pfsync init)
> carp: pfsync0 demoted
> group carp by 1 to 163 (pfsync bulk start)
> carp: pfsync0 demoted group pfsync
> by 1 to 33 (pfsync bulk start)
> carp: carp0 demoted group carp by -1 to 162
> (carpdev)
> carp: carp7 demoted group carp by -1 to 161 (carpdev)
> carp0: state
> transition: BACKUP -> MASTER
> carp7: state transition: BACKUP -> MASTER
> carp:
> pfsync0 demoted group carp by -1 to 32 (pfsync bulk fail)
> carp: pfsync0
> demoted group pfsync by -1 to 32 (pfsync bulk fail)
> carp: pfsync0 demoted
> group carp by -32 to 0 (pfsync init)
> carp: pfsync0 demoted group pfsync by -32
> to 0 (pfsync init)
> pfsync: failed to receive bulk update
> carp7: state
> transition: BACKUP -> MASTER
> carp0: state transition: BACKUP -> MASTER
> carp:
> pfsync0 demoted group carp by 1 to 1 (pfsync link state down)
> carp: pfsync0
> demoted group pfsync by 1 to 1 (pfsync link state down)
> carp: pfsync0 demoted
> group carp by -1 to 0 (pfsync bulk cancelled)
> carp: pfsync0 demoted group
> pfsync by -1 to 0 (pfsync bulk cancelled)
> carp: pfsync0 demoted group carp by
> -1 to 0 (pfsync bulk cancelled)
> carp: pfsync0 demoted group pfsync by -1 to 0
> (pfsync bulk cancelled)
> carp: pfsync0 demoted group carp by -1 to 0 (pfsync
> link state up)
> carp: pfsync0 demoted group pfsync by -1 to 0 (pfsync link
> state up)
> arp: attempt to overwrite entry for 192.168.1.1 on lo0 by
> 00:00:5e:00:01:01 on em0
> arp: attempt to overwrite entry for X.X.X.116 on lo0
> by 00:00:5e:00:01:01 on em7
> arp: attempt to overwrite entry for 192.168.1.1 on
> lo0 by 00:00:5e:00:01:01 on em0
> arp: attempt to overwrite entry for X.X.X.116
> on lo0 by 00:00:5e:00:01:01 on em7
> carp7: state transition: BACKUP -> MASTER
> carp7: state transition: BACKUP -> MASTER
