Mihai,
There it is:
# dmesg
OpenBSD 5.4 (GENERIC.MP) #44: Tue Jul 30 12:13:32 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-
CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem = 1062113280 (1012MB)
avail mem = 1033289728 (985MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/19/08, BIOS32 rev. 0 @ 0xffea0,
SMBIOS rev. 2.5 @ 0xf0450 (73 entries)
bios0: vendor Dell Inc. version "A03" date 02/19/2008
bios0: Dell Inc. OptiPlex 330
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET SLIC SSDT SSDT SSDT
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5)
PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-
CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 3 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus -1 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus -1 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xb800! 0xcb800/0x2000! 0xcd800/0x2800
cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2400, 2000, 1600, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x0a
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x0a: apic 8 int 16
pci1 at ppb0 bus 1
vga1 at pci0 dev 2 function 0 "Intel 82G33 Video" rev 0x0a
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
intel_overlay_map_regs partial stub
No connectors reported connected with modes
Cannot find any crtc or sizes - going 1024x768
inteldrm0: 1024x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82G33 Video" rev 0x0a at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Analog Devices AD1984
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5787" rev 0x02, BCM5754/5787 A2
(0xb002): apic 8 int 16, address 00:1e:c9:1d:1a:a2
brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 23
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
re0 at pci3 dev 1 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB
(0x1000), apic 8 int 17, address 00:1a:3f:85:54:16
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
re1 at pci3 dev 2 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB
(0x1000), apic 8 int 18, address 00:1a:3f:85:58:35
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD1600AAJS-7, 01.0> SCSI3 0/direct
fixed naa.50014ee1010d2278
sd0: 152587MB, 512 bytes/sector, 312500000 sectors
cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, DVD-ROM TS-H353B, D500> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8
int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/3.06 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (0f2845273a397c0c.a) swap on sd0b dump on sd0b
pppoe0: lcp close(initial)
pppoe0: lcp open(initial)
pppoe0: lcp initial->starting
pppoe0: phase establish
pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
pppoe0: timeout
pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
pppoe0: timeout
pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
pppoe0: timeout
pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
pppoe0: timeout
pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
# cat /etc/hostname.pppoe0
inet 0.0.0.0 255.255.255.255 NONE mtu 1500 pppoedev bge0 authproto pap
authname 'x...@xxx.com.br' authkey 'xxx' debug up
dest 0.0.0.1
!route add -mpath default -ifp pppoe0 0.0.0.1
# cat /etc/hostname.bge0
up mtu 1508
Thanks,
Felipe
On Tue, Jul 22, 2014 at 6:10 PM, Mihai Popescu <mih...@gmail.com> wrote:
> Send your /etc/hostname.pppoe0 without user/paswword in clear and the
> /etc/hostname.xxx, where xxx is the hardware interface you are using for
> pppoe. Dmesg will be a plus.
