On 2014-07-14 00.54.15 -0700, Mike Larkin wrote:
> On Sun, Jul 13, 2014 at 06:22:34PM -0400, Mike Burns wrote:
> > Thinkpad X1 Carbon with a touchscreen, running 5.5-stable. When I resume
> > from suspend my Xorg.0.log is flooded with:
> >
> > (EE) ws: /dev/wsmouse1: read error Input/output error
> >
> > In my dmesg:
> >
> > wsmouse1: can't attach mux (error=5)
>
> Are you using wsmoused?
I was not, and now am, but I'm seeing the same issue. The errors in
dmesg are gone, different output now in Xorg.0.log:
[ 97.351] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 101.776] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 101.776] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using
pipe 0, position (0, 0), rotation normal, reflection none
[ 101.910] (EE) xf86OpenSerial: Cannot open device /dev/wsmouse
Device busy.
[ 101.910] (EE) ws: /dev/wsmouse: cannot open input device
[ 101.910] (EE) ws: /dev/wsmouse: wsOpen failed Device busy
[ 101.910] [dix] couldn't enable device 8
[ 105.038] (EE) ws: /dev/wsmouse1: read error Input/output error
[ 105.038] (EE) ws: /dev/wsmouse1: read error Input/output error
[ 105.038] (EE) ws: /dev/wsmouse1: read error Input/output error
[ 105.038] (EE) ws: /dev/wsmouse1: read error Input/output error
And for good measure, the new dmesg after suspend+resume:
ugen0 detached
ugen1 detached
video0 detached
uvideo0 detached
uhub2 detached
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 3
ugen1 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4
uvideo0 at uhub2 port 6 configuration 1 interface 0 "SunplusIT INC.
Integrated Camera" rev 2.00/36.22 addr 5
video0 at uvideo0
uhid0 detached
uhid1 detached
uhid2 detached
wsmouse1 detached
ums0 detached
ums1 detached
uhidev0 detached
uhub3 detached
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 3 configuration 1 interface 0 "eGalax Inc.
eGalaxTouch EXC7903-66v03_T1" rev 2.00/66.03 addr 3
uhidev0: iclass 3/1, 7 report ids
uhid0 at uhidev0 reportid 1: input=5, output=0, feature=0
uhid1 at uhidev0 reportid 3: input=63, output=63, feature=0
uhid2 at uhidev0 reportid 5: input=0, output=0, feature=2
ums0 at uhidev0 reportid 6: 1 button, tip
wsmouse1 at ums0 mux 0
ums1 at uhidev0 reportid 7
ums1: mouse has no X report
This is my /etc/fbtab (unmodified from the fresh 5.5 install):
/dev/ttyC0 0600
/dev/console:/dev/wskbd:/dev/wskbd0:/dev/wsmouse:/dev/wsmouse0:/dev/ttyCcfg:/dev/drm0
Just to be clear, the "ws: /dev/wsmouse1: read error Input/output error"
is repeated continuously until I stop X.
With wsmoused, after resume, neither the trackpoint nor the touchscreen
work.
In experimenting, I discovered that changing to the console and back to
X causes the trackpoint to stop working (moving it reflects nothing on
the screen), but the touchscreen continues to work. (If I quit X from
there, the kernel crashes; will submit a bug report later.)
This is what that adds to my Xorg.0.log:
[281.444] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 283.930] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 283.930] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using
pipe 0, position (0, 0), rotation normal, reflection none
[ 284.051] (EE) xf86OpenSerial: Cannot open device /dev/wsmouse
wsmouseDevice busy.
[ 284.051] (EE) ws: /dev/wsmouse: cannot open input device
[ 284.053] (EE) ws: /dev/wsmouse: wsOpen failed Device busy
[ 284.053] [dix] couldn't enable device 8
Is my fbtab right? Is there something else to configure? This is my
first time on OpenBSD in a decade, so I'm sure things have changed since
I last configured it.
Thanks for any advice,
-Mike
> -ml
>
> >
> > Attached are four files: the dmesg before zzz, Xorg.0.log before zzz,
> > dmesg added after zzz, Xorg.0.log added after zzz.
> >
> > Is this fixed on -current? Is there a workaround? Something I need to
> > configure? More information needed?
> >
> > -Mike
> > OpenBSD 5.5-stable (GENERIC.MP) #0: Sat Jul 12 23:07:41 CEST 2014
> > m...@bellifortis.my.domain:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 8255762432 (7873MB)
> > avail mem = 8027381760 (7655MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (71 entries)
> > bios0: vendor LENOVO version "G6ET93WW (2.53 )" date 02/04/2013
> > bios0: LENOVO 3444CUU
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT
> > ASF! UEFI UEFI MSDM SSDT SSDT UEFI SSDT DBG2
> > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
> > EHC2(S3) HDEF(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpihpet0 at acpi0: 14318179 Hz
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1896.04 MHz
> > cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> > cpu0: 256KB 64b/line 8-way L2 cache
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 99MHz
> > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1895.70 MHz
> > cpu1:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> > cpu1: 256KB 64b/line 8-way L2 cache
> > cpu1: smt 1, core 0, package 0
> > cpu2 at mainbus0: apid 2 (application processor)
> > cpu2: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1895.70 MHz
> > cpu2:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> > cpu2: 256KB 64b/line 8-way L2 cache
> > cpu2: smt 0, core 1, package 0
> > cpu3 at mainbus0: apid 3 (application processor)
> > cpu3: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1895.70 MHz
> > cpu3:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> > cpu3: 256KB 64b/line 8-way L2 cache
> > cpu3: smt 1, core 1, package 0
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> > acpiec0 at acpi0
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (PEG_)
> > acpiprt2 at acpi0: bus 2 (EXP1)
> > acpiprt3 at acpi0: bus 3 (EXP2)
> > acpicpu0 at acpi0: C2, C1, PSS
> > acpicpu1 at acpi0: C2, C1, PSS
> > acpicpu2 at acpi0: C2, C1, PSS
> > acpicpu3 at acpi0: C2, C1, PSS
> > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
> > acpitz0 at acpi0: critical temperature is 200 degC
> > acpibtn0 at acpi0: LID_
> > acpibtn1 at acpi0: SLPB
> > acpibat0 at acpi0: BAT0 model "45N1071" serial 1475 type LiP oem "SMP"
> > acpibat1 at acpi0: BAT1 not present
> > acpiac0 at acpi0: AC unit online
> > acpithinkpad0 at acpi0
> > cpu0: Enhanced SpeedStep 1896 MHz: speeds: 2001, 2000, 1900, 1800, 1700,
> > 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> > intagp0 at vga1
> > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> > inteldrm0 at vga1
> > drm0 at inteldrm0
> > inteldrm0: 1600x900
> > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
> > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> > puc0 at pci0 dev 22 function 3 "Intel 7 Series KT" rev 0x04: ports: 1 com
> > com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
> > com4: probed fifo depth: 0 bytes
> > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
> > audio0 at azalia0
> > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> > pci1 at ppb0 bus 2
> > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16
> > sdmmc0 at sdhc0
> > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> > pci2 at ppb1 bus 3
> > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x96:
> > msi, MIMO 2T2R, MoW, address 84:3a:4b:0a:ae:80
> > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x1e56 rev
> > 0x04
> > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
> > 1.3
> > scsibus0 at ahci0: 32 targets
> > sd0 at scsibus0 targ 0 lun 0: <ATA, INTEL SSDSCMMW24, LE9i> SCSI3 0/direct
> > fixed naa.5001517803db5380
> > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
> > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2
> > int 18
> > iic0 at ichiic0
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> > ugen0 at uhub2 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 3
> > ugen1 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4
> > uvideo0 at uhub2 port 6 configuration 1 interface 0 "SunplusIT INC.
> > Integrated Camera" rev 2.00/36.22 addr 5
> > video0 at uvideo0
> > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> > uhidev0 at uhub3 port 3 configuration 1 interface 0 "eGalax Inc.
> > eGalaxTouch EXC7903-66v03_T1" rev 2.00/66.03 addr 3
> > uhidev0: iclass 3/1, 7 report ids
> > uhid0 at uhidev0 reportid 1: input=5, output=0, feature=0
> > uhid1 at uhidev0 reportid 3: input=63, output=63, feature=0
> > uhid2 at uhidev0 reportid 5: input=0, output=0, feature=2
> > ums0 at uhidev0 reportid 6: 1 button, tip
> > wsmouse1 at ums0 mux 0
> > ums1 at uhidev0 reportid 7
> > ums1: mouse has no X report
> > vscsi0 at root
> > scsibus1 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus2 at softraid0: 256 targets
> > sd1 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
> > sd1: 227906MB, 512 bytes/sector, 466751982 sectors
> > root on sd1a (a1a57dffe6790454.a) swap on sd1b dump on sd1b
> > ugen0 detached
> > ugen1 detached
> > video0 detached
> > uvideo0 detached
> > uhub2 detached
> > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> > ugen0 at uhub2 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 3
> > ugen1 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4
> > uvideo0 at uhub2 port 6 configuration 1 interface 0 "SunplusIT INC.
> > Integrated Camera" rev 2.00/36.22 addr 5
> > video0 at uvideo0
> > ehci_idone: ex=0xffff800000cd8a00 is done!
> > uhid0 detached
> > uhid1 detached
> > uhid2 detached
> > wsmouse1: can't attach mux (error=5)
> > wsmouse1 detached
> > ums0 detached
> > ums1 detached
> > uhidev0 detached
> > uhub3 detached
> > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> > uhidev0 at uhub3 port 3 configuration 1 interface 0 "eGalax Inc.
> > eGalaxTouch EXC7903-66v03_T1" rev 2.00/66.03 addr 3
> > uhidev0: iclass 3/1, 7 report ids
> > uhid0 at uhidev0 reportid 1: input=5, output=0, feature=0
> > uhid1 at uhidev0 reportid 3: input=63, output=63, feature=0
> > uhid2 at uhidev0 reportid 5: input=0, output=0, feature=2
> > ums0 at uhidev0 reportid 6: 1 button, tip
> > wsmouse1 at ums0 mux 0
> > ums1 at uhidev0 reportid 7
> > ums1: mouse has no X report
> > [ 18.762] (--) checkDevMem: using aperture driver /dev/xf86
> > [ 18.785] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility
> > mode (version 3.32)
> > [ 18.817]
> > X.Org X Server 1.14.5
> > Release Date: 2013-12-12
> > [ 18.818] X Protocol Version 11, Revision 0
> > [ 18.818] Build Operating System: OpenBSD 5.5 amd64
> > [ 18.818] Current Operating System: OpenBSD bellifortis.my.domain 5.5
> > GENERIC.MP#0 amd64
> > [ 18.818] Build Date: 26 February 2014 09:16:04PM
> > [ 18.818]
> > [ 18.818] Current version of pixman: 0.32.4
> > [ 18.818] Before reporting problems, check http://wiki.x.org
> > to make sure that you have the latest version.
> > [ 18.818] Markers: (--) probed, (**) from config file, (==) default
> > setting,
> > (++) from command line, (!!) notice, (II) informational,
> > (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > [ 18.819] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 13
> > 22:04:58 2014
> > [ 18.823] (==) Using system config directory
> > "/usr/X11R6/share/X11/xorg.conf.d"
> > [ 18.825] (==) No Layout section. Using the first Screen section.
> > [ 18.825] (==) No screen section available. Using defaults.
> > [ 18.825] (**) |-->Screen "Default Screen Section" (0)
> > [ 18.825] (**) | |-->Monitor "<default monitor>"
> > [ 18.826] (==) No monitor specified for screen "Default Screen Section".
> > Using a default monitor configuration.
> > [ 18.826] (==) Disabling SIGIO handlers for input devices
> > [ 18.826] (==) Automatically adding devices
> > [ 18.826] (==) Automatically enabling devices
> > [ 18.826] (==) Not automatically adding GPU devices
> > [ 18.836] (==) FontPath set to:
> > /usr/X11R6/lib/X11/fonts/misc/,
> > /usr/X11R6/lib/X11/fonts/TTF/,
> > /usr/X11R6/lib/X11/fonts/OTF/,
> > /usr/X11R6/lib/X11/fonts/Type1/,
> > /usr/X11R6/lib/X11/fonts/100dpi/,
> > /usr/X11R6/lib/X11/fonts/75dpi/
> > [ 18.836] (==) ModulePath set to "/usr/X11R6/lib/modules"
> > [ 18.836] (II) The server relies on wscons to provide the list of input
> > devices.
> > If no devices become available, reconfigure wscons or disable
> > AutoAddDevices.
> > [ 18.837] (II) Loader magic: 0x1b525b8ec040
> > [ 18.837] (II) Module ABI versions:
> > [ 18.837] X.Org ANSI C Emulation: 0.4
> > [ 18.837] X.Org Video Driver: 14.1
> > [ 18.837] X.Org XInput driver : 19.1
> > [ 18.837] X.Org Server Extension : 7.0
> > [ 18.837] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f9 rev 9, Mem @
> > 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
> > [ 18.838] Initializing built-in extension Generic Event Extension
> > [ 18.838] Initializing built-in extension SHAPE
> > [ 18.838] Initializing built-in extension MIT-SHM
> > [ 18.838] Initializing built-in extension XInputExtension
> > [ 18.838] Initializing built-in extension XTEST
> > [ 18.838] Initializing built-in extension BIG-REQUESTS
> > [ 18.838] Initializing built-in extension SYNC
> > [ 18.838] Initializing built-in extension XKEYBOARD
> > [ 18.838] Initializing built-in extension XC-MISC
> > [ 18.838] Initializing built-in extension SECURITY
> > [ 18.838] Initializing built-in extension XINERAMA
> > [ 18.838] Initializing built-in extension XFIXES
> > [ 18.838] Initializing built-in extension RENDER
> > [ 18.838] Initializing built-in extension RANDR
> > [ 18.838] Initializing built-in extension COMPOSITE
> > [ 18.838] Initializing built-in extension DAMAGE
> > [ 18.838] Initializing built-in extension MIT-SCREEN-SAVER
> > [ 18.838] Initializing built-in extension DOUBLE-BUFFER
> > [ 18.838] Initializing built-in extension RECORD
> > [ 18.838] Initializing built-in extension DPMS
> > [ 18.838] Initializing built-in extension X-Resource
> > [ 18.838] Initializing built-in extension XVideo
> > [ 18.838] Initializing built-in extension XVideo-MotionCompensation
> > [ 18.838] Initializing built-in extension XFree86-VidModeExtension
> > [ 18.838] Initializing built-in extension XFree86-DGA
> > [ 18.838] Initializing built-in extension XFree86-DRI
> > [ 18.838] Initializing built-in extension DRI2
> > [ 18.838] (II) LoadModule: "glx"
> > [ 18.844] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
> > [ 18.848] (II) Module glx: vendor="X.Org Foundation"
> > [ 18.848] compiled for 1.14.5, module version = 1.0.0
> > [ 18.848] ABI class: X.Org Server Extension, version 7.0
> > [ 18.848] (==) AIGLX enabled
> > [ 18.849] Loading extension GLX
> > [ 18.849] (==) Matched intel as autoconfigured driver 0
> > [ 18.849] (==) Matched vesa as autoconfigured driver 1
> > [ 18.849] (==) Assigned the driver to the xf86ConfigLayout
> > [ 18.849] (II) LoadModule: "intel"
> > [ 18.850] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
> > [ 18.861] (II) Module intel: vendor="X.Org Foundation"
> > [ 18.861] compiled for 1.14.5, module version = 2.99.910
> > [ 18.861] Module class: X.Org Video Driver
> > [ 18.861] ABI class: X.Org Video Driver, version 14.1
> > [ 18.861] (II) LoadModule: "vesa"
> > [ 18.863] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
> > [ 18.864] (II) Module vesa: vendor="X.Org Foundation"
> > [ 18.864] compiled for 1.14.5, module version = 2.3.3
> > [ 18.864] Module class: X.Org Video Driver
> > [ 18.864] ABI class: X.Org Video Driver, version 14.1
> > [ 18.864] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
> > i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
> > 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
> > Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
> > GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
> > [ 18.865] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
> > [ 18.865] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
> > [ 18.866] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
> > [ 18.866] (II) VESA: driver for VESA chipsets: vesa
> > [ 18.870] (WW) Falling back to old probe method for vesa
> > [ 18.873] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD
> > Graphics 4000
> > [ 18.873] (--) intel(0): CPU: x86-64
> > [ 18.873] (II) intel(0): Creating default Display subsection in Screen
> > section
> > "Default Screen Section" for depth/fbbpp 24/32
> > [ 18.873] (==) intel(0): Depth 24, (--) framebuffer bpp 32
> > [ 18.873] (==) intel(0): RGB weight 888
> > [ 18.873] (==) intel(0): Default visual is TrueColor
> > [ 18.875] (**) intel(0): Framebuffer tiled
> > [ 18.875] (**) intel(0): Pixmaps tiled
> > [ 18.875] (**) intel(0): "Tear free" disabled
> > [ 18.875] (**) intel(0): Forcing per-crtc-pixmaps? no
> > [ 18.875] (II) intel(0): Output LVDS1 has no monitor section
> > [ 18.875] (II) intel(0): Output VGA1 has no monitor section
> > [ 18.875] (II) intel(0): Output HDMI1 has no monitor section
> > [ 18.876] (II) intel(0): Output DP1 has no monitor section
> > [ 18.876] (II) intel(0): Output VIRTUAL1 has no monitor section
> > [ 18.876] (--) intel(0): Output LVDS1 using initial mode 1600x900 on
> > pipe 0
> > [ 18.876] (==) intel(0): DPI set to (96, 96)
> > [ 18.876] (II) Loading sub module "dri2"
> > [ 18.876] (II) LoadModule: "dri2"
> > [ 18.876] (II) Module "dri2" already built-in
> > [ 18.876] (II) UnloadModule: "vesa"
> > [ 18.876] (II) Unloading vesa
> > [ 18.877] (==) Depth 24 pixmap format is 32 bpp
> > [ 18.886] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2)
> > backend
> > [ 18.886] (==) intel(0): Backing store disabled
> > [ 18.886] (==) intel(0): Silken mouse disabled
> > [ 18.888] (II) intel(0): HW Cursor enabled
> > [ 18.888] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
> > disabled message.
> > [ 18.893] (==) intel(0): DPMS enabled
> > [ 18.894] (II) intel(0): [DRI2] Setup complete
> > [ 18.894] (II) intel(0): [DRI2] DRI driver: i965
> > [ 18.894] (II) intel(0): [DRI2] VDPAU driver: i965
> > [ 18.894] (II) intel(0): direct rendering: DRI2 Enabled
> > [ 18.894] (--) RandR disabled
> > [ 18.985] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> > [ 18.985] (II) AIGLX: enabled GLX_INTEL_swap_event
> > [ 18.985] (II) AIGLX: enabled GLX_ARB_create_context
> > [ 18.985] (II) AIGLX: enabled GLX_ARB_create_context_profile
> > [ 18.985] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
> > [ 18.985] (II) AIGLX: enabled GLX_SGI_swap_control and
> > GLX_MESA_swap_control
> > [ 18.985] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
> > objects
> > [ 18.986] (II) AIGLX: Loaded and initialized i965
> > [ 18.986] (II) GLX: Initialized DRI2 GL provider for screen 0
> > [ 18.996] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using
> > pipe 0, position (0, 0), rotation normal, reflection none
> > [ 19.008] (II) intel(0): Setting screen physical size to 423 x 238
> > [ 19.213] (II) config/wscons: checking input device /dev/wskbd
> > [ 19.213] (II) wskbd: using layout us
> > [ 19.213] (II) LoadModule: "kbd"
> > [ 19.215] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
> > [ 19.216] (II) Module kbd: vendor="X.Org Foundation"
> > [ 19.216] compiled for 1.14.5, module version = 1.8.0
> > [ 19.216] Module class: X.Org XInput Driver
> > [ 19.216] ABI class: X.Org XInput driver, version 19.1
> > [ 19.216] (II) Using input driver 'kbd' for '/dev/wskbd'
> > [ 19.216] (**) /dev/wskbd: always reports core events
> > [ 19.216] (**) /dev/wskbd: always reports core events
> > [ 19.216] (**) Option "Protocol" "standard"
> > [ 19.216] (**) Option "XkbRules" "base"
> > [ 19.216] (**) Option "XkbModel" "pc105"
> > [ 19.217] (**) Option "XkbLayout" "us"
> > [ 19.217] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
> > KEYBOARD, id 6)
> > [ 20.231] (II) config/wscons: checking input device /dev/wsmouse1
> > [ 20.231] (II) LoadModule: "ws"
> > [ 20.233] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
> > [ 20.236] (II) Module ws: vendor="X.Org Foundation"
> > [ 20.236] compiled for 1.14.5, module version = 1.3.0
> > [ 20.236] Module class: X.Org XInput Driver
> > [ 20.236] ABI class: X.Org XInput driver, version 19.1
> > [ 20.236] (II) Using input driver 'ws' for '/dev/wsmouse1'
> > [ 20.236] (**) /dev/wsmouse1: always reports core events
> > [ 20.236] (II) ws: /dev/wsmouse1: debuglevel 0
> > [ 20.236] (**) Option "Device" "/dev/wsmouse1"
> > [ 20.236] (**) ws: /dev/wsmouse1: ZAxisMapping: buttons 4 and 5
> > [ 20.236] (**) ws: /dev/wsmouse1: WAxisMapping: buttons 6 and 7
> > [ 20.236] (**) ws: /dev/wsmouse1: associated screen: 0
> > [ 20.236] (**) ws: /dev/wsmouse1: device will work in raw mode
> > [ 20.236] (II) ws: /dev/wsmouse1: minimum x position: 0
> > [ 20.236] (II) ws: /dev/wsmouse1: maximum x position: 4095
> > [ 20.236] (II) ws: /dev/wsmouse1: minimum y position: 0
> > [ 20.236] (II) ws: /dev/wsmouse1: maximum y position: 4095
> > [ 20.236] (==) ws: /dev/wsmouse1: Buttons: 7
> > [ 20.237] (**) ws: /dev/wsmouse1: YAxisMapping: buttons 4 and 5
> > [ 20.237] (II) XINPUT: Adding extended input device "/dev/wsmouse1"
> > (type: TOUCHSCREEN, id 7)
> > [ 20.237] (**) /dev/wsmouse1: (accel) keeping acceleration scheme 1
> > [ 20.237] (**) /dev/wsmouse1: (accel) acceleration profile 0
> > [ 20.237] (**) /dev/wsmouse1: (accel) acceleration factor: 2.000
> > [ 20.237] (**) /dev/wsmouse1: (accel) acceleration threshold: 4
> > [ 20.237] (II) config/wscons: checking input device /dev/wsmouse
> > [ 20.237] (II) Using input driver 'ws' for '/dev/wsmouse'
> > [ 20.237] (**) /dev/wsmouse: always reports core events
> > [ 20.238] (II) ws: /dev/wsmouse: debuglevel 0
> > [ 20.238] (**) Option "Device" "/dev/wsmouse"
> > [ 20.238] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
> > [ 20.238] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
> > [ 20.238] (**) ws: /dev/wsmouse: associated screen: 0
> > [ 21.243] (II) ws: /dev/wsmouse: minimum x position: 0
> > [ 21.243] (II) ws: /dev/wsmouse: maximum x position: 1599
> > [ 21.243] (II) ws: /dev/wsmouse: minimum y position: 0
> > [ 21.243] (II) ws: /dev/wsmouse: maximum y position: 899
> > [ 21.243] (==) ws: /dev/wsmouse: Buttons: 7
> > [ 21.247] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
> > [ 21.247] (II) XINPUT: Adding extended input device "/dev/wsmouse"
> > (type: MOUSE, id 8)
> > [ 22.254] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
> > [ 22.254] (**) /dev/wsmouse: (accel) acceleration profile 0
> > [ 22.254] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
> > [ 22.254] (**) /dev/wsmouse: (accel) acceleration threshold: 4
> > [ 24.547] (II) intel(0): EDID vendor "LGD", prod id 898
> > [ 24.547] (II) intel(0): Printing DDC gathered Modelines:
> > [ 24.547] (II) intel(0): Modeline "1600x900"x0.0 108.00 1600 1648 1680
> > 1924 900 903 908 936 -hsync -vsync (56.1 kHz eP)
> > [ 3037.709] (II) AIGLX: Suspending AIGLX clients for VT switch
> > [ 3038.320] (EE) intel(0): Failed to submit rendering commands, disabling
> > acceleration.
> > [ 3042.215] (II) AIGLX: Resuming AIGLX clients after VT switch
> > [ 3042.215] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using
> > pipe 0, position (0, 0), rotation normal, reflection none
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.182] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.183] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.183] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.183] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
> > [ 3045.184] (EE) ws: /dev/wsmouse1: read error Input/output error
