2014-06-13 3:45 GMT-03:00 Bryan Linton <b...@shoshoni.info>:
> On 2014-06-12 18:35:05, Rodrigo Mosconi <open...@mosconi.mat.br> wrote:
> > Hi guys,
> >
> > I would like to know if is possible to make an application (xclock, for
> > example) to be always present, regardless the selected group.
> > On my configuration I have a gap, where I place xclock without group.
> When
> > I use "grouponlyN" all applications hides (ok, described behavior),
> > including xclock.
> >
> > Is possible to make xclock present on all groups?
> >
> > I understood from cwm(1) and cwmrc(5) that an application can be member
> of
> > only one group or no group. Is that true?
> >
> > If does not exists "allgroups", that feature is interesting to be added?
> >
> > Thanks
> >
>
> Since in another mail you sent to the list, you said you're using
> snapshots, there was a bug introduced in CWM back in February that
> prevents applications from being omnipresent.
>
Bryan,
The other email is about another machine. The cwm machine runs a snapshot
Jun 11.
Folow dmesg:
OpenBSD 5.5-current (GENERIC) #164: Wed Jun 11 13:11:27 MDT 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA C7-M Processor 6300MHz ("CentaurHauls" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR
real mem = 803434496 (766MB)
avail mem = 777863168 (741MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/27/09, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.5 @ 0xfcfc0 (47 entries)
bios0: vendor American Megatrends Inc. version "080014" date 27/04/2009
bios0: Phitronics PC3000E+
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG WDRT OEMB HPET
acpi0: wakeup devices NPGS(S4) NP0S(S4) RLAN(S4) USB1(S3) USB2(S3) USB3(S3)
USB4(S3) EHCI(S3) PS2K(S3) PS2M(S3) UAR1(S4) UAR2(S4) SLAN(S4) SLT2(S4)
SLT3(S4) SLT1(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0: apid 2 pa 0xfecc0000, version 3, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (NBPG)
acpiprt3 at acpi0: bus 3 (NBP0)
acpiprt4 at acpi0: bus -1 (P0P9)
acpiprt5 at acpi0: bus 128 (PCI1)
acpicpu0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xd400
cpu0: Enhanced SpeedStep disabled by BIOS
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA P4M900 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xf0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA P4M900 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA P4M900 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA P4M900 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA P4M900 Host" rev 0x00
"VIA P4M900 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6 "VIA P4M900 Security" rev 0x00
pchb6 at pci0 dev 0 function 7 "VIA P4M900 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA Chrome9 HC IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 2 function 0 "VIA P4M900" rev 0x80
pci2 at ppb1 bus 2
ppb2 at pci0 dev 3 function 0 "VIA P4M900" rev 0x80: apic 2 int 7
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E (0x3400),
apic 2 int 4, address 00:25:11:ee:26:45
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
pciide0 at pci0 dev 15 function 0 "VIA VT8237S SATA" rev 0x00: DMA
pciide0: using apic 1 int 21 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM121HI>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0xb0: apic 1 int 20
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0xb0: apic 1 int 22
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0xb0: apic 1 int 21
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0xb0: apic 1 int 23
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: apic 1 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237S ISA" rev 0x00: SMI
iic0 at viapm0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pchb7 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
pchb8 at pci0 dev 19 function 0 "VIA VT8237A" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
pci4 at mainbus0 bus 128
azalia0 at pci4 dev 1 function 0 "VIA HD Audio" rev 0x10: apic 1 int 17
azalia0: codecs: Realtek ALC662
audio0 at azalia0
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8712F rev 8, EC port 0xa10
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhub5 at uhub2 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech USB Keyboard"
rev 1.10/64.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Logitech USB Keyboard"
rev 1.10/64.00 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub5 port 3 configuration 1 interface 0 "No brand 4 Port
KVMSwicther" rev 1.10/1.00 addr 4
uhidev2: iclass 3/0
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub5 port 3 configuration 1 interface 1 "No brand 4 Port
KVMSwicther" rev 1.10/1.00 addr 4
uhidev3: no input interrupt endpoint
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (8b00e0034e7782a1.a) swap on wd0b dump on wd0b
>
> I reported the bug, and was told by the developer in question that
> they did not have time to track it down right now, but would as
> soon as they had free time.
> http://marc.info/?l=openbsd-bugs&m=139536903917298&w=2
>
> In the meantime, you can use CVS to checkout a copy of CWM from
> February 6th, 2014, and rebuild it. It takes less than 10 seconds
> to build on a CPU circa 2005. In that case, provided that the
> application doesn't automatically start assigned to a group, you
> can press <CTRL>+<ALT>+MOUSE1 (CM-M1 in cwm(1)) to make windows
> omnipresent.
>
> --
> Bryan
