Hello,
I tried to install a few machines with OpenBSD/hppa 3.8 without success.
In the past I installed them with OpenBSD 3.6, switched them the hard
way to use the serial console (using machine) and threw away the
horrible big and noisy (and compatible :/) screens.
When I boot the lif38.fs image, the boot prompt appears (where I can
still enter some commands), the kernel boots, ask me to install or
upgrade, and this is where I got stuck. I could not enter anything. I
tried booting with a keyboard attached to the HIL or PS/2 (depending on
machine) without success (still using rs232 as console).
I tried using lif36.fs to verify if this ever worked, and it did.
Is there something new not mentioned in the INSTALL file I should know
about? or any solutions to fix the netboot? Maybe I overlooked
something.
The machines I've tried:
9000/715/64
9000/712/80
9000/712/100
Kind regards,
Jimmy Scott
console/dmesg log from a 9000/712/80:
BOOT_ADMIN> Information
Processor revision 2.4100MHz
Instruction Cache Size: 131072
Data Cache Size: 131072
Memory Size: 128 MB
Built in floating point coprocessor
Board Serial Number 401105L1MV
BootRom Version 2.2
auto boot on
auto search off
fastboot off
Primary boot path: scsi.6.0
Alternate boot path: lan.000000-000000.0.0
Console path: rs232.9600.8.none
LAN Station Addresses: 080009-7DFA86
080009-FFFFFF
BOOT_ADMIN> boot lan isl
Booting
>> OpenBSD/hppa BOOT 0.8
boot>
booting lf0a:/bsd: 2084864+454656+2666496+389120=0x6d9148
SPID bits: 0x0, error = -2
pdc_coproc: 0xc0, 0xc0; model d rev 1
[ bsd ELF symbol table not valid: symtab unaligned ]
[ no symbol table formats found ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.8 (RAMDISK) #275: Sat Sep 10 17:22:17 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/hppa/compile/RAMDISK
HP 9000/712/100 (King Gecko) PA-RISC 1.1c
real mem = 134217728 (524288 reserved for PROM, 8785920 used by OpenBSD)
avail mem = 108199936
using 8421 buffers containing 13393920 bytes of memory
mainbus0 (root) [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0: DR25
mem0 at mainbus0 offset ffbf000: viper rev 0, size 128MB
cpu0 at mainbus0 offset ffbe000 irq 31: PCXL L1-A 100MHz, FPU PCXL
(CMOS-26B) rev 1
cpu0: 128K(32b/l) Icache, 128K(32b/l) wr-back Dcache, 64 coherent TLB, 8
BTLB
lasi1 at mainbus0 offset 500000 irq 27: rev 3.0
lasi0 at mainbus0 offset 100000 irq 28: rev 3.0
gsc0 at lasi0
gsckbc0 at gsc0 offset 8100 irq 26
gsckbc1 at gsc0 offset 8000 irq 26
"floppy controller" at gsc0 (type a sv 83 mod 1 hv d0) offset a000 not
configured
"Advanced audio (ext.)" at gsc0 (type a sv 7b mod 1 hv d0) offset 4000
not configured
lpt0 at gsc0 offset 2000 irq 7
com0 at gsc0 offset 5000 irq 5: ns16550a, 16 byte fifo
ie0 at gsc0 offset 7000 irq 8: LASI/i82596CA v1.0, address
08:00:09:7d:fa:86
osiop0 at gsc0 offset 6000 irq 9: NCR53C710 rev 2, 40MHz, SCSI ID 7
scsibus0 at osiop0: 8 targets
osiop0: target 6 now using 8 bit 10 MHz 8 REQ/ACK offset xfers
sd0 at scsibus0 targ 6 lun 0: <QUANTUM, EMPIRE_1080S, 1242> SCSI2
0/direct fixed
sd0: 1029MB, 2874 cyl, 8 head, 91 sec, 512 bytes/sec, 2109376 sec total
sti0 at mainbus0 offset 8000000 irq 11: HPA208LC1280 rev 8.04;7, ID
0x2B4DED6D40A00499
sti0: 2048x1024 frame buffer, 1280x1024x8 display, offset 0x0
sti0: 8x16 font type 1, 16 bpc, charset 0-255
gsc1 at lasi1
com1 at gsc1 offset 5000 irq 5: ns16550a, 16 byte fifo
biomask 0xb netmask 0x2b ttymask 0x3f
boot path: 2/0/2.10000.be8a0050.8dd1dd7b.74ee3403.ac100005.ac100128
class=4098 flags=0 hpa=0xf0107000 spa=0x0 io=0x84ec
rd0: fixed, 5120 blocks
wsdisplay0 at sti0 mux 1
wsdisplay0: screen 0 added (default, vt100 emulation)
rootdev=0x300 rrootdev=0x900 rawdev=0x902
WARNING: clock gained 81 days -- CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
(I)nstall, (U)pgrade or (S)hell?
--
The Four Horsemen of the Apocalypse: Death, Famine, War, and SNMP
[demime 1.01d removed an attachment of type application/pgp-signature]
