On 18 May 2014 15:19, Norman Golisz <li...@zcat.de> wrote:
> Hi Gilles,
>
> On Sun May 18 2014 13:45, Gilles Chehade wrote:
>> can you share your configuration file ?
>>
>> i'm unable to reproduce no matter what i try :-/
>
> I'm also able to reproduce this crash:
>
> $ echo test | mail norman && sudo smtpd -dv
>
> debug: init ssl-tree
> info: OpenSMTPD 5.4.3 starting
> debug: bounce warning after 4h
> debug: using "fs" queue backend
> debug: using "ramqueue" scheduler backend
> debug: using "ram" stat backend
> info: startup [debug mode]
> debug: init ssl-tree
> debug: parent_send_config_ruleset: reloading
> debug: parent_send_config: configuring pony process
> debug: parent_send_config: configuring ca process
> debug: init private ssl-tree
> debug: queue: done loading queue into scheduler
> debug: ca_engine_init: using RSAX engine support
> debug: smtp: listen on 127.0.0.1 port 25 flags 0x0 pki ""
> debug: smtp: listen on IPv6:fe80::1%lo0 port 25 flags 0x0 pki ""
> debug: smtp: listen on IPv6:::1 port 25 flags 0x0 pki ""
> debug: smtp: will accept at most 501 clients
> debug: smtpd: scanning offline queue...
> debug: smtpd: enqueueing offline message
> /var/spool/smtpd/offline/1400440122.uj4xYO8YaC
> debug: smtpd: offline scanning done
> debug: smtp: new client on listener: 0x14804c2680c0
> smtp-in: New session 80dc422d384e8c2d from host 1000@localhost [local]
> warn: parent -> pony: pipe closed
> warn: queue -> pony: pipe closed
> warn: ca -> pony: pipe closed
> warn: control -> pony: pipe closed
> warn: scheduler -> queue: pipe closed
> warn: lka -> pony: pipe closed
>
>
> smtpd.conf:
>
> listen on lo0
>
> table aliases db:/etc/mail/aliases.db
>
> table secrets { me => me.local:whoohoo}
>
> accept for local alias <aliases> deliver to maildir
> accept for any relay via tls+auth://m...@smtp.me.local:587 auth <secrets>
>
>
> dmesg:
>
> OpenBSD 5.5-current (GENERIC.MP) #132: Fri May 16 10:26:11 MDT 2014
> t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Try with something newer. Others (including me) have found today's
snap to work. For as yet unknown reasons.
.... Ken
> real mem = 4166717440 (3973MB)
> avail mem = 4047036416 (3859MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
> bios0: vendor LENOVO version "7UET94WW (3.24 )" date 10/17/2012
> bios0: LENOVO 6475BE3
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA
> DMAR SSDT SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4)
> EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3)
> EHC1(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 2261.31 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
> cpu0: 3MB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
> cpu0: apic clock running at 266MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 2261.01 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
> cpu1: 3MB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpiprt6 at acpi0: bus 13 (EXP4)
> acpiprt7 at acpi0: bus 21 (PCI1)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 100 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "42T5264" serial 3499 type LION oem "Panasonic"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK docked (15)
> cpu0: Enhanced SpeedStep 2261 MHz: speeds: 2267, 2266, 1600, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1440x900
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
> 00:1c:25:95:39:e7
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> azalia0: codecs: Conexant CX20561
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO
> 3T3R, MoW, address 00:16:ea:b3:62:e8
> ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
> pci4 at ppb3 bus 13
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
> pcmcia0 at cardslot0
> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS725050A7, GH2O> SCSI3 0/direct
> fixed naa.5000cca76cc03cc3
> sd0: 476940MB, 512 bytes/sector, 976773168 sectors
> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-U20N, HX10> ATAPI 5/cdrom
> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
> iic0 at ichiic0
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> umass0 at uhub0 port 1 configuration 1 interface 0 "JetFlash Mass Storage
> Device" rev 2.00/11.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <JetFlash, Transcend 8GB, 1100> SCSI2 0/direct
> removable serial.856410004SXZH4F3E24H
> sd1: 7728MB, 512 bytes/sector, 15826944 sectors
> uhub8 at uhub0 port 5 "IBM product 0x4485" rev 2.00/0.01 addr 3
> uhidev0 at uhub8 port 1 configuration 1 interface 0 "Logitech USB-PS/2
> Optical Mouse" rev 2.00/18.00 addr 4
> uhidev0: iclass 3/1
> ums0 at uhidev0: 6 buttons, Z dir
> wsmouse1 at ums0 mux 0
> umodem0 at uhub1 port 4 configuration 1 interface 1 "Ericsson Ericsson F3507g
> Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
> umodem0: data interface 2, has CM over data, has break
> umodem0: status change notification available
> ucom0 at umodem0
> umodem1 at uhub1 port 4 configuration 1 interface 3 "Ericsson Ericsson F3507g
> Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
> umodem1: data interface 4, has CM over data, has break
> umodem1: status change notification available
> ucom1 at umodem1
> cdce0 at uhub1 port 4 configuration 1 interface 7 "Ericsson Ericsson F3507g
> Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
> cdce0: address 02:80:37:ec:02:00
> ugen0 at uhub1 port 4 configuration 1 "Ericsson Ericsson F3507g Mobile
> Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
> sd2: 250876MB, 512 bytes/sector, 513794592 sectors
> root on sd2a (d2946bed46ef4222.a) swap on sd2b dump on sd2b
>
>
> Please let me know if I can provide more info to you.
>
> Norman
