On 30 Apr 2014 15:39, "Martijn Rijkeboer" <mart...@bunix.org> wrote: > > > Please post at least a dmesg with the disk attached but no disklabel > > plus fdisk and disklabel output after setting the label but before the > > (failing) reboot. > > Below you will find the dmesg and output from fdisk and disklabel before > and after labeling. I used Linux to partition the harddisk, because if I > use the "Whole" option from the OpenBSD installer in can't boot... > > Kind regards, > > > Martijn Rijkeboer > > dmesg > ===== > > OpenBSD 5.5-current (GENERIC.MP) #86: Tue Apr 29 03:35:46 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8443088896 (8051MB) > avail mem = 8209612800 (7829MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb5f0 (76 entries) > bios0: vendor American Megatrends Inc. version "F2" date 01/18/2014 > bios0: Gigabyte Technology Co., Ltd. B85M-DS3H > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT SSDT SSDT MCFG HPET SSDT SSDT DMAR > acpi0: wakeup devices PS2K(S3) PS2M(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz, 2893.72 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,A ES,XSAVE,AVX,F16C,RDRAND,LONG,LAHF,ABM,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=25345, max=46847 (bogus) > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz, 2893.30 MHz > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,A ES,XSAVE,AVX,F16C,RDRAND,LONG,LAHF,ABM,PERF,ITSC > cpu1: 256KB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP03) > acpiprt3 at acpi0: bus -1 (P0P2) > acpiprt4 at acpi0: bus -1 (P0PA) > acpiprt5 at acpi0: bus -1 (P0PB) > acpiprt6 at acpi0: bus -1 (PEG0) > acpiprt7 at acpi0: bus -1 (PEG1) > acpiprt8 at acpi0: bus -1 (PEG2) > acpiec0 at acpi0: Failed to read resource settings > acpicpu0 at acpi0: C2, C1, PSS > acpicpu1 at acpi0: C2, C1, PSS > acpipwrres0 at acpi0: FN00, resource for FAN0 > acpipwrres1 at acpi0: FN01, resource for FAN1 > acpipwrres2 at acpi0: FN02, resource for FAN2 > acpipwrres3 at acpi0: FN03, resource for FAN3 > acpipwrres4 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 90 degC > acpitz1 at acpi0: critical temperature is 90 degC > acpibat0 at acpi0: BAT0 not present > acpibat1 at acpi0: BAT1 not present > acpibat2 at acpi0: BAT2 not present > acpibtn0 at acpi0: PWRB > acpibtn1 at acpi0: LID0 > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: Enhanced SpeedStep 2893 MHz: speeds: 2900, 2800, 2600, 2500, 2300, 2200, 2100, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 900, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06 > intagp0 at vga1 > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 > inteldrm0 at vga1 > drm0 at inteldrm0 > error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before writing to 100000 > inteldrm0: 1920x1200 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: msi > azalia0: No codecs found > "Intel 8 Series xHCI" rev 0x05 at pci0 dev 20 function 0 not configured > "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 1 com > com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo > com4: probed fifo depth: 0 bytes > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x05: msi > azalia1: codecs: Realtek/0x0887 > audio0 at azalia1 > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd5: msi > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL (0x2c80), msi, address 74:d4:35:04:aa:86 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5 > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 2 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel B85 LPC" rev 0x05 > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI 1.3 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG HD105SI, 1AJ1> SCSI3 0/direct fixed naa.50024e92045ce5b1 > sd0: 953868MB, 512 bytes/sector, 1953523055 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 2 int 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800 > spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-12800 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2 > uhub3 at uhub2 port 5 "Apple, Inc. Keyboard Hub" rev 2.00/96.15 addr 3 > uhidev0 at uhub3 port 2 configuration 1 interface 0 "Apple, Inc Apple Keyboard" rev 2.00/0.69 addr 4 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 13 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 2 configuration 1 interface 1 "Apple, Inc Apple Keyboard" rev 2.00/0.69 addr 4 > uhidev1: iclass 3/0 > uhid0 at uhidev1: input=1, output=0, feature=0 > uhub4 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2 > umass0 at uhub4 port 3 configuration 1 interface 0 " Patriot Memory" rev 2.10/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <, Patriot Memory, PMAP> SCSI2 0/direct removable serial.13fe5100C301B2E04834 > sd1: 15112MB, 512 bytes/sector, 30949376 sectors > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd1a (a3ed61f6fc0ade60.a) swap on sd1b dump on sd1b > > > fdisk before > ============ > > Disk: /dev/rsd0c geometry: 121601/255/63 [1953523055 Sectors] > Offset: 0 Signature: 0xAA55 > Starting Ending LBA Info: > #: id C H S - C H S [ start: size ] > ----------------------------------------------------------------------------- -- > 0: A6 0 32 33 - 121601 25 24 [ 2048: 1953519616 ] OpenBSD > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > > > disklabel before > ================ > > # /dev/rsd0c: > type: SCSI > disk: SCSI disk > label: SAMSUNG HD105SI > duid: 0000000000000000 > flags: > bytes/sector: 512 > sectors/track: 63 > tracks/cylinder: 255 > sectors/cylinder: 16065 > cylinders: 121601 > total sectors: 1953523055 > boundstart: 2048 > boundend: 1953521664 > drivedata: 0 > > 16 partitions: > # size offset fstype [fsize bsize cpg] > c: 1953523055 0 unused > > > fdisk after > =========== > > Disk: /dev/rsd0c geometry: 121601/255/63 [1953523055 Sectors] > Offset: 0 Signature: 0xAA55 > Starting Ending LBA Info: > #: id C H S - C H S [ start: size ] > ----------------------------------------------------------------------------- -- > 0: A6 0 32 33 - 121601 25 24 [ 2048: 1953519616 ] OpenBSD > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > > > disklabel after > =============== > > # /dev/rsd0c: > type: SCSI > disk: SCSI disk > label: SAMSUNG HD105SI > duid: 5add888003f9a66d > flags: > bytes/sector: 512 > sectors/track: 63 > tracks/cylinder: 255 > sectors/cylinder: 16065 > cylinders: 121601 > total sectors: 1953523055 > boundstart: 2048 > boundend: 1953521664 > drivedata: 0 > > 16 partitions: > # size offset fstype [fsize bsize cpg] > a: 4206976 2048 4.2BSD 2048 16384 1 > b: 8385936 4209024 swap > c: 1953523055 0 unused >
Nothing obvious has leapt out yet. But since you are devoting the whole disk to OpenBSD, why not use the the MBR that fdisk(8) produces during the install process? I.e. say 'whole disk'. It would be a clue of that worked but your custom one did not. ... Ken
