I just upgraded a machine from source today. I then found a lot of
interesting errors at the end of my dmesg, the likes of which I've never
seen before.
Clearly I'm doing something wrong, not because I know how to interpret
the error messages, but because virtually every other error I've ever
run into on OpenBSD is due to my having done something wrong.
Might anyone be kind enough to tell me what it is this time?
Thanks.
OpenBSD 5.5 (GENERIC) #0: Fri Feb 28 16:05:20 PST 2014
sc...@vergil.rockology.com:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1995309056 (1902MB)
avail mem = 1933684736 (1844MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0100 (52 entries)
bios0: vendor Award Software International, Inc. version "F5" date
07/27/2007
bios0: Gigabyte Technology Co., Ltd. GA-MA69VM-S2
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP SSDT MCFG APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) SBAZ(S4) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4)
PCE7(S4) PCE8(S4) PS2M(S5) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 3200+, 2004.82 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,SVM,EAPICSP,AMCR8
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P2P_)
acpiprt2 at acpi0: bus 2 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE8)
acpiprt9 at acpi0: bus 1 (AGP_)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PWRB
cpu0: PowerNow! K8 2004 MHz: speeds: 2000 1800 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon X1250" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
ppb1 at pci0 dev 2 function 0 "ATI RS690M PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel 82572EI" rev 0x06: apic 2 int 18,
address 00:1b:21:00:6e:c2
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 2 int
22, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD2500JD-41H, 21.0> SCSI3
0/direct fixed t10.ATA_WDC_WD2500JD-41HBC0_WD-WMAL72832761
sd0: 238474MB, 512 bytes/sector, 488395055 sectors
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 2 int 16,
version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 2 int 17,
version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 2 int 17,
version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 2 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI
iic0 at piixpm0
iic0: addr 0x2e 00=00 01=00 02=80 03=00 04=a1 05=07 06=00 07=00 words
00=00ff 01=00ff 02=80ff 03=00ff 04=a1ff 05=07ff 06=00ff 07=00ff
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2
int 16
azalia0: codecs: Realtek ALC888
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
re0 at pci3 dev 15 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), apic 2 int 23, address 00:1d:7d:93:5b:94
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core
rev DH-F2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8716F rev 0, EC port 0x228
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (94c944f1736d57c6.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (RS690 0x1002:0x791E 0x1458:0xD000).
radeondrm0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used)
radeondrm0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
drm: PCIE GART of 512M enabled (table at 0x00000000052B1000).
error: [drm:pid0:r100_ring_test] *ERROR* radeon: ring test failed
(scratch(0x15E4)=0xCAFEDEAD)
error: [drm:pid0:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
error: [drm:pid0:rs690_startup] *ERROR* failed initializing CP (-22).
error: [drm:pid0:rs690_init] *ERROR* Disabling GPU acceleration
error: [drm:pid0:r100_cp_fini] *ERROR* Wait for CP idle timeout,
shutting down CP.
error: [drm:pid0:r100_gui_wait_for_idle] *ERROR* radeon: wait for empty
RBBM fifo failed ! Bad things might happen.
error: [drm:pid0:r100_cp_disable] *ERROR* Failed to wait GUI idle while
programming pipes. Bad things might happen.
drm: radeon: cp finalized
No connectors reported connected with modes
Cannot find any crtc or sizes - going 1024x768
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
