Reactivating the dhclient-script is not going to happen. I am interested in what you would see syntax in dhclient.conf looking like.
Would multi-path routing modifications to all routes be needed? How should this be combined with supersede/default/append commands for the relevant options? Would it apply to all members of each option, or route by route? If all else fails you can always use the ISC dhclient from ports to gain access to a dhclient-script again. .... Ken On 31 January 2014 02:04, Holger Glaess <gla...@glaessixs.de> wrote: > Am 30.01.2014 13:10, schrieb Giancarlo Razzolini: > >> Em 29-01-2014 18:13, Holger Glaess escreveu: >>> >>> hi >>> >>> i try to setup and multipath configuration with 2 line provider >>> >>> 1 cable with dhcp(client) >>> 1 with pppoe >>> >>> just dynamic ips. >>> >>> the pppoe config create well the new default route with -math >>> but dhclient dont. >>> >>> [snip pppoe config] >>> >>> inet 0.0.0.0 255.255.255.255 NONE \ >>> pppoedev msk0 authproto pap \ >>> authname 'bla@blub' authkey 'blub' up >>> dest 0.0.0.1 >>> !/sbin/route add -mpath default -ifp pppoe0 0.0.0.1 >>> >>> [/snip pppoe config] >>> >>> >>> after a couple of days i found that the dhclient not use the >>> dhclient-script since 5.3 anymore. >>> >>> >>> so how can i setup the -math option at the dhclient config ? >>> >>> >>> or it is possible to add some lines in dhclient that he check the >>> sysctl and , if net.inet.ip.multipath=1 , >>> he add the default route with ( for ) multipathing. >>> >>> >>> >>> >>> >>> >>> holger >>> >> Check if your dhcp server always gives you the same router ip address. >> If so, you can tweak with your dhclient.conf to reject and not ask for >> routers, and then set it up manually as you do in your hostname.pppoe0. >> And you can always run a script that is run after the dhcp negotiation, >> looks for the gateway related entry, deletes it and then re-adds it with >> the mpath modifier. There are a lot of options in this regard. >> >> Cheers, >> > > hi > > shure , i can write a wrap around solution for the but this not the > "dynamic" way like > pppoe or dhcp to get and set ips. > > i'm not the C programmer but i think it is not mutch work to add a solution > in dhclient, > or as option to reaktivate the dhclient-script part. > > > holger
