umass1 at uhub1 port 6 configuration 1 interface 0 "Technology
Mobile"rev 2.00/1.02 addr 3umass1: using SCSI over Bulk-Onlyscsibus2
at umass1: 2 targets, initiator 0cd1 at scsibus2 targ 1 lun 0: <, Mass
Storage, 2.31> SCSI2 5/cdrom removable$ sudo mount /dev/cd1a /mnt$ ls
/mntAUTORUN.INF Readme beforeinstallation
autorun.shAutoRun.exe Set
Whitelist For ConnectManager install_linuxConnect Manager
Startup.icoLinux
SysConfig.datand no other devices appears in dmesg
On Thu, Jan 23, 2014 at 11:51 AM, Shawn K. Quinn <skqu...@rushpost.com>wrote:
> On Thu, Jan 23, 2014, at 01:34 AM, ÐиÑилл Ðаплин wrote:
> > Hello.
> > This is my trouble: huawei e3276 recognized as cdrom on OpenBSD 5.4.
> > After I try to add entry with id to usbdevs and recompile the kernel, it
> > start to recognize as urndis, but with errors and no success.
> > Any ideas? And what info I must provide to you?
>
> Try to mount this "cdrom" and do an ls of it; a lot of devices use this
> trick to store Windows drivers without a separate physical optical disc
> shipping with the product. If so, this is fixable but slightly more
> involved than just adding a new device id to a table.
>
> --
> Shawn K. Quinn
> skqu...@rushpost.com
