I have two dell 1U 1850's I am ready to quit feeing electricity + several
spare scsi drives with trays. Couple questions. Would OpenBSD be interested
in them and if so where would they need to be shipped to ( I need to figure
out what it would cost to do so )
dmesg below ( this one has one core the other has two ..both have 10GB
ram ) ...
OpenBSD 5.2 (GENERIC.MP) #368: Wed Aug 1 10:04:49 MDT 2012
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 10736099328 (10238MB)
avail mem = 10427936768 (9944MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf9920 (87 entries)
bios0: vendor Dell Computer Corporation version "A04" date 09/22/2005
bios0: Dell Computer Corporation PowerEdge 1850
acpi0 at bios0: rev 0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET MCFG
acpi0: wakeup devices PCI0(S5) PALO(S5) PBLO(S5) VPR0(S5) PBHI(S5)
VPR1(S5) PICH(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz, 2993.05 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.00GHz, 2992.71 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
ioapic2 at mainbus0: apid 4 pa 0xfec83000, version 20, 24 pins
ioapic2: misconfigured as apic 0, remapped to apid 4
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PALO)
acpiprt2 at acpi0: bus 2 (DOBA)
acpiprt3 at acpi0: bus 3 (DOBB)
acpiprt4 at acpi0: bus 4 (PBLO)
acpiprt5 at acpi0: bus 8 (VPR0)
acpiprt6 at acpi0: bus 5 (PBHI)
acpiprt7 at acpi0: bus 6 (PXB1)
acpiprt8 at acpi0: bus 7 (PXB2)
acpiprt9 at acpi0: bus 9 (PICH)
acpicpu0 at acpi0
acpicpu1 at acpi0
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x06
pci2 at ppb1 bus 2
ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: apic 3 int 14
ami0: Dell 16c, 32b, FW 521X, BIOS vH430, 256MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 140160MB, 512 bytes/sector, 287047680 sectors
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x2 SCSI BP, 1.0> SCSI2
3/processor fixed
ppb2 at pci1 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x06
pci3 at ppb2 bus 3
ppb3 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 5 function 0 "Intel E7520 PCIE" rev 0x09
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Intel 6700PXH PCIE-PCIX" rev 0x09
pci6 at ppb5 bus 6
em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05:
apic 4 int 0, address 00:13:72:4d:97:2f
ppb6 at pci5 dev 0 function 2 "Intel 6700PXH PCIE-PCIX" rev 0x09
pci7 at ppb6 bus 7
em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05:
apic 4 int 1, address 00:13:72:4d:97:30
ppb7 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x09
pci8 at ppb7 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 18
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb8 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci9 at ppb8 bus 9
"Dell DRAC 4" rev 0x00 at pci9 dev 5 function 0 not configured
puc0 at pci9 dev 5 function 1 "Dell DRAC 4 Virtual UART" rev 0x00: ports: 1 com
com2 at puc0 port 0 apic 2 int 21: ns16550a, 16 byte fifo
com2: probed fifo depth: 0 bytes
"Dell DRAC 4 SMIC" rev 0x00 at pci9 dev 5 function 2 not configured
pciide0 at pci9 dev 6 function 0 "CMD Technology PCI0680" rev 0x02
pciide0: bus-master DMA support present
pciide0: channel 0 wired to native-PCI mode
pciide0: using apic 2 int 23 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
sd1 at scsibus2 targ 0 lun 0: <DELL, VSF, 0123> ATAPI 0/direct removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus3 at atapiscsi1: 2 targets
cd0 at scsibus3 targ 0 lun 0: <DELL, VCD, 0133> ATAPI 5/cdrom removable
sd1(pciide0:0:0): using PIO mode 3
cd0(pciide0:0:1): using PIO mode 3
pciide0: channel 1 wired to native-PCI mode
vga1 at pci9 dev 13 function 0 "ATI Radeon VE" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 2 int 18
drm0 at radeondrm0
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide1 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi2 at pciide1 channel 0 drive 0
scsibus4 at atapiscsi2: 2 targets
cd1 at scsibus4 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> ATAPI
5/cdrom removable
cd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhub4 at uhub0 port 3 "Dell product 0xa001" rev 2.00/0.00 addr 2
ugen0 at uhub4 port 2 "Garmin International GPSmap 60Csx" rev 1.10/0.01 addr 3
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Dell DRAC4" rev
1.10/0.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Dell DRAC4" rev
1.10/0.00 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
scsibus6 at softraid0: 256 targets
root on sd0a (5597f7ca6b2a1c98.a) swap on sd0b dump on sd0b
--
--Dan
