On 11/11/2013 22:22, patrick keshishian wrote:
Greetings,
Saw this semi-related post[1], posting separately not to hijack it.
Searching marc.info for "cellular modem" on misc@ archives
finds mostly old, and posts about using mobile phones as
cellular modems.
Are there standalone cellular modem devices known to work
with OpenBSD?
Multi-Tech's QuickCarrier USB-D[2] caught my attention.
--patrick
[1] http://marc.info/?l=openbsd-misc&m=138419004519701&w=2
[2] http://www.multitech.com/en_US/PRODUCTS/Families/QuickCarrierUSBD/
Not OpenBSD per se, but I've been using the following Huawei device (via
wifi) with great success:
http://consumer.huawei.com/en/portable-internet/mobile-wifi/tech-specs/e5220-en.htm
Basically it sets up a wireless hotspot so as long as your device has a
wireless NIC you can have 3G connectivity.
FYI, I just tried to see if USB tethering is working on this device but
with no luck. Looks like the device ID is unknown(?) Anyway, dmesg and
the "usbdevs -dv" output are available below. I also disconnected and
reconnected the device so you can see what it spits out on the console.
HTH,
Stijn
--- dmesg
OpenBSD 5.4 (GENERIC) #37: Tue Jul 30 12:05:01 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class)
901 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,PERF
real mem = 1064366080 (1015MB)
avail mem = 1035530240 (987MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/11/08, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.5 @ 0xf06f0 (37 entries)
bios0: vendor American Megatrends Inc. version "0906" date 09/11/2008
bios0: ASUSTeK Computer INC. 900
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC OEMB MCFG
acpi0: wakeup devices P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4)
MC97(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 100MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P3)
acpiprt2 at acpi0: bus 3 (P0P5)
acpiprt3 at acpi0: bus 1 (P0P6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 model "900" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit online
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xf800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1024x600
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic 1
int 17, address 00:22:15:22:f5:9e
atphy0 at lii0 phy 1: F2 10/100 PHY, rev. 2
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int 18
pci3 at ppb2 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <ASUS-PHISON OB SSD>
wd0: 1-sector PIO, LBA, 3847MB, 7880544 sectors
wd1 at pciide0 channel 1 drive 1: <ASUS-PHISON SSD>
wd1: 1-sector PIO, LBA, 7695MB, 15761088 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-3200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
urndis0 at uhub0 port 2 configuration 1 interface 0 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
urndis0: using Vendorurndis0: STALLED
urndis0: init failed
urndis0: STALLED
urndis0: query failed
: unable to get hardware address
urndis1 at uhub0 port 2 configuration 1 interface 2 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
urndis1: using Vendorurndis1: STALLED
urndis1: init failed
urndis1: STALLED
urndis1: query failed
: unable to get hardware address
umass0 at uhub0 port 2 configuration 1 interface 4 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 0/direct
removable
umass1 at uhub0 port 5 configuration 1 interface 0 "ENE UB6225" rev
2.00/1.00 addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0
0/direct removable serial.09511606146030377350
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. CNF7129" rev 2.00/15.12 addr 4
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (b94a69d3a66e6350.a) swap on wd0b dump on wd0b
--- disconnect of the device
urndis0 detached
urndis1 detached
sd0 detached
scsibus0 detached
umass0 detached
--- reconnect of the device
umsm0 at uhub0 port 2 configuration 1 interface 0 "HUAWEI HUAWEI Mobile"
rev 2.00/1.02 addr 2
umsm0 detached
urndis0 at uhub0 port 2 configuration 1 interface 0 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
urndis0: using Vendorurndis0: STALLED
urndis0: init failed
urndis0: STALLED
urndis0: query failed
: unable to get hardware address
urndis1 at uhub0 port 2 configuration 1 interface 2 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
urndis1: using Vendorurndis1: STALLED
urndis1: init failed
urndis1: STALLED
urndis1: query failed
: unable to get hardware address
umass0 at uhub0 port 2 configuration 1 interface 4 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 0/direct
removable
--- "usbdevs -dv"
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub0
port 1 powered
port 2 addr 2: high speed, power 500 mA, config 1, HUAWEI
Mobile(0x1c1e), HUAWEI(0x12d1), rev 1.02
urndis0
urndis1
umass0
port 3 powered
port 4 powered
port 5 addr 3: high speed, power 498 mA, config 1, UB6225(0x1606),
ENE(0x0951), rev 1.00, iSerialNumber 146030377350
umass1
port 6 powered
port 7 powered
port 8 addr 4: high speed, power 500 mA, config 1, CNF7129(0xb071),
Chicony Electronics Co., Ltd.(0x04f2), rev 15.12, iSerialNumber SN0001
uvideo0
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub1
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub2
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub3
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub4
port 1 powered
port 2 powered
