On 11/10/13 20:21, Bill Clay wrote: > A while ago, I had 2 disks combined in RAID-1 with softraid > Later, 1 disk died. I just removed and kept the good > remaining disk and now I want to grab some files off of it. > > The drive shows up as sd1 in dmesg > $disklabel sd1 > shows that the partition in question is d and has fstype RAID > but it won't let me > $mount /dev/sd1d /mnt/disk_d
for one... you aren't showing you are doing the mount as root. :) but that's not your big problem. > If I remember correctly, the RAID was itself (sub?)partitioned > (is that the right terminology?) > I don't want to rebuild it, or recover it, > I just want to get access and copy some of the files off of it. > > So, what is the best recommended way to mount and get access > to the files on a partition with fstype RAID? > > thanks > sd1d would be the partition used to create the softraid virtual disk. You can't mount that partition any more than you mount an entire disk. You want the partitions INSIDE that virtual disk, which should have come up in your dmesg at boot as probably sd2 (or later, if there were other sd-ish devices) Nick.
