Hello everyone

I´m having very slow transfers on stock 5.3 with the TP-LINK tg-3468 gb
pci-e nic.

When downloading OpenBSD src.tar.gz with wget from a local server on 100mb
lan it will start around 100k/sec and after a fews second goes to 50-60k.

In the same machine, without any hardware change (not even unplug net
cables), I installed Windows 7 and the TG-3468 drivers. Firefox reported
9.5 mb/sec when downloading src.tar.gz from the same server.

Below is  some hardware data.

Thank you!

Juan

# ifconfig re0
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr xx:xx:xx:xx:xx:xx
        priority: 0
        groups: egress
        media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
        status: active
        inet6 fe80::fa1a:67ff:fe04:2f48%re0 prefixlen 64 scopeid 0x1
        inet 192.168.1.159 netmask 0xffffff00 broadcast 192.168.1.255
#


# cat /var/run/dmesg.boot
OpenBSD 5.3 (GENERIC.MP) #58: Tue Mar 12 18:43:53 MDT 2013
    dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz ("GenuineIntel" 686-class)
3.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,D
S-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSA
VE,AVX,F16C,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
real mem  = 3649409024 (3480MB)
avail mem = 3578793984 (3413MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/22/11, SMBIOS rev. 2.7 @ 0xe96e0
(74 entries)
bios0: vendor American Megatrends Inc. version "F9" date 08/22/2012
bios0: Gigabyte Technology Co., Ltd. H77M-D3H
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT SSDT SSDT
acpi0: wakeup devices PS2K(S3) PS2M(S3) P0P1(S4) USB1(S3) USB2(S3) USB3(S3)
USB4(S3) USB5(S3) USB6(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4)
PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4)
PXSX(S4) RP07(S4) PXSX(S4) RP08(S4) PEGP(S4) PEG0(S4) PEG1(S4) PEG2(S4)
PEG3(S4) GLAN(S4) EHC1(S4) EHC2(S4) XHC_(S4) HDEF(S4) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz ("GenuineIntel" 686-class)
3.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,D
S-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSA
VE,AVX,F16C,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz ("GenuineIntel" 686-class)
3.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,D
S-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSA
VE,AVX,F16C,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz ("GenuineIntel" 686-class)
3.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,D
S-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSA
VE,AVX,F16C,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus 2 (RP05)
acpiprt7 at acpi0: bus 3 (RP06)
acpiprt8 at acpi0: bus 4 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: Failed to read resource settings
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpicpu2 at acpi0: C3, C1, PSS
acpicpu3 at acpi0: C3, C1, PSS
acpipwrres0 at acpi0: FN00
acpipwrres1 at acpi0: FN01
acpipwrres2 at acpi0: FN02
acpipwrres3 at acpi0: FN03
acpipwrres4 at acpi0: FN04
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xe600
cpu0: Enhanced SpeedStep 3393 MHz: speeds: 3400, 3300, 3200, 3000, 2900,
2800, 2700, 2600, 2400, 2300, 2200, 2100, 2000, 1800, 1700, 1600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200v2 Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: VIA/0x0441, Intel/0x2806, using VIA/0x0441
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 16
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 16
pci2 at ppb1 bus 2
"Attansic Technology L1F" rev 0x10 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 5 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 17
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E
(0x2c00), apic 2 int 17, address f8:1a:67:04:2f:48
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
ppb3 at pci0 dev 28 function 6 "Intel 82801BA Hub-to-PCI" rev 0xc4: apic 2
int 18
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Intel 82801BA Hub-to-PCI" rev 0x41
pci5 at ppb4 bus 5
ne3 at pci5 dev 0 function 0 "Realtek 8029" rev 0x00: apic 2 int 18,
address 00:00:21:29:b6:aa
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H77 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 7 Series SATA" rev 0x04: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD10EZEX-60ZF5A0>
wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GH24NS95, RN01> ATAPI
5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide0 channel 1 drive 0: <WDC WD10EZEX-60ZF5A0>
wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2
int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 7 Series SATA" rev 0x04: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 1 configuration 1 interface 0 "Kingston DataTraveler
G3" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler G3, PMAP> SCSI2
0/direct removable serial.09306545ED1139250098
sd0: 14887MB, 512 bytes/sector, 30489408 sectors
umass1 at uhub2 port 2 configuration 1 interface 0 "Kingston DataTraveler
G3" rev 2.00/1.00 addr 4
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler G3, PMAP> SCSI2
0/direct removable serial.09306545ED113924004B
sd1: 14887MB, 512 bytes/sector, 30489408 sectors
uhidev0 at uhub2 port 5 configuration 1 interface 0 "vendor 0x04f3 product
0x0103" rev 2.00/1.07 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 5 configuration 1 interface 1 "vendor 0x04f3 product
0x0103" rev 2.00/1.07 addr 5
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub2 port 6 configuration 1 interface 0 "Genius USB Optical
Mouse" rev 2.00/1.00 addr 6
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a (ca16efb970c6f191.a) swap on wd0b dump on wd0b
re0: watchdog timeout
re0: watchdog timeout
#

Reply via email to