Melameth, Daniel D. wrote:
Fred Crowson wrote:
If you are after an 802.11g card then the Edimax EW-7128G can be found
in the UK at:
http://marc.theaimsgroup.com/?l=openbsd-misc&m=113101477530208&w=2
I managed to buy two from:
http://www.dabs.com/productview.aspx?Quicklinx=3119
which were marginally cheaper and they are both working well with
OpenBSD 3.8, using ral.
Happen to be doing hostap with these?
One is and one isn't -
on OpenBSD 3.8 box:
ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0e:2e:51:b3:0c
media: IEEE802.11 autoselect hostap
status: active
ieee80211: nwid nowires chan 2 bssid 00:0e:2e:51:b3:0c 100dBm
inet 10.0.5.1 netmask 0xffffff00 broadcast 10.0.5.255
inet6 fe80::20e:2eff:fe51:b30c%ral0 prefixlen 64 scopeid 0x4
This one is an OpenBSD 3.7 box:
ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:0e:2e:51:b2:f1
ieee80211: nwid wifinet chan 1 bssid 00:02:6f:21:ef:1c nwkey
<not displayed> 100dBm
media: IEEE802.11 autoselect (DS11)
status: active
inet 10.0.5.5 netmask 0xffffff00 broadcast 10.0.5.255
inet6 fe80::20e:2eff:fe51:b2f1%ral0 prefixlen 64 scopeid 0x2
HTH
Fred
