Hi, I have a problem with making sound work under OpenBSD. I have already read the FAQ, but not luck with those, :P. Here are all the datails:
I'm using OpenBSD 3.8, i386 platform. My motherboard is a SY-P4VGM one. http://www.soyousa.com/products/proddesc.php?id=273 My chip (VT8233) is supported. http://www.openbsd.org/i386.html My sound system is a 2.1 one. audioctl -a output: name=VIA VT8233 version= config=auvia encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16* properties=full_duplex,mmap,independent full_duplex=0 fullduplex=0 blocksize=416 hiwat=157 lowat=117 monitor_gain=0 mode= play.rate=8000 play.channels=1 play.precision=8 play.encoding=mulaw play.gain=127 play.balance=32 play.port=0x0 play.avail_ports=0x0 play.seek=0 play.samples=0 play.eof=0 play.pause=0 play.error=0 play.waiting=0 play.open=0 play.active=0 play.buffer_size=65536 record.rate=8000 record.channels=1 record.precision=8 record.encoding=mulaw record.gain=191 record.balance=32 record.port=0x1 record.avail_ports=0x7 record.seek=0 record.samples=0 record.eof=0 record.pause=0 record.error=0 record.waiting=0 record.open=0 record.active=0 record.buffer_size=65536 record.errors=0 dmesg.boot content: OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(R) CPU 2.50GHz ("GenuineIntel" 686-class) 2.50 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID real mem = 502837248 (491052K) avail mem = 451833856 (441244K) using 4278 buffers containing 25243648 bytes (24652K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(2e) BIOS, date 10/21/03, BIOS32 rev. 0 @ 0xfb240 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf44 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/144 (7 entries) pcibios0: PCI Exclusive IRQs: 5 11 12 pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xc000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT8751 PCI" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "S3 ProSavage DDR" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) vendor "Acer Labs", unknown product 0x5459 (class communications subclass modem, rev 0x00) at pci0 dev 9 function 0 not configured uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 12 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 11 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00 pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV0221N> wd0: 16-sector PIO, LBA48, 19130MB, 39179952 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <ATAPI, CD-RW CW5201, 210C> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 12 ac97: codec id 0x56494161 (VIA Technologies VT1612A) ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D audio0 at auvia0 vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11 address 00:50:2c:a2:51:aa ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x004063, model 0x0032, rev. 8 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x290/8: IT87 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ff65 netmask ff65 ttymask ffe7 pctr: user-level cycle counter enabled dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 uhidev0 at uhub1 port 2 configuration 1 interface 0 uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 mixerctl -a output: outputs.master=199,199 outputs.master.mute=off outputs.mono=255 outputs.mono.mute=on outputs.mono.source=mixerout outputs.headphones=255,255 outputs.headphones.mute=on outputs.bass=255 outputs.treble=255 inputs.speaker=255 inputs.speaker.mute=off inputs.phone=191 inputs.phone.mute=on inputs.mic=191 inputs.mic.mute=on inputs.mic.preamp=off inputs.mic.source=mic0 inputs.line=191,191 inputs.line.mute=on inputs.cd=191,191 inputs.cd.mute=off inputs.video=191,191 inputs.video.mute=on inputs.aux=191,191 inputs.aux.mute=on inputs.dac=191,191 inputs.dac.mute=off record.source=mic record.volume=255,255 record.volume.mute=off record.mic=0 record.mic.mute=off outputs.loudness=off outputs.spatial=off outputs.spatial.center=0 outputs.spatial.depth=0 outputs.surround=255,255 outputs.surround.mute=off outputs.center=255 outputs.center.mute=off outputs.lfe=255 outputs.lfe.mute=off I can hear sound if I turn off outputs.headphones.mute (even when I'm not using headphones), but it sounds noisy. I noticed that, when turning on inputs.*.mute, I got not sound at all (turning off inputs.dac.mute solves the problem). The last thing: when I checked, Windows XP used IRQ 22, and OpenBSD is using IRQ 12. Well, hope you can help me (*and* understand me, :P). Good luck
