I'm trying to use ldom on a few sun fire t1000s. The host system tells me "ERROR: Physical resources required by LDoms configuration: openbsd not available. Falling back to default set" after I "ldomctl download" and then "reset -c" at ALOM.
I upgraded from factory 2005 firmware to this one ftp://ftp.gl.umbc.edu/syscore/t1000/139435-09.zip just to get the hypervisor functionality at all. OpenBSD itself seems to work fine under both firmwares. A sample error message, ldom config and dmesg are below. It even happens when I delete everything but the first domain "one". --- # halt /etc/rc.shutdown in progress... /etc/rc.shutdown complete. syncing disks... done halted Program terminated {0} ok sc> reset -c Are you sure you want to reset the system [y/n]? y Enter #. to return to ALOM. SC Alert: SC Request to Reset Host. SC Alert: Host System has Reset JUN 10 21:42:00 ERROR: Physical resources required by LDoms configuration: openbsd not available. Falling back to default set / Sun Fire(TM) T1000, No Keyboard Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.30.4.d, 8064 MB memory available, Serial #70050376. Ethernet address 0:14:4f:2c:e2:48, Host ID: 842ce248. Boot device: disk File and args: OpenBSD IEEE 1275 Bootblock 1.3 ..>> OpenBSD BOOT 1.4 Trying bsd... ... # cat ldom.conf domain one { vcpu 1 memory 2G vdisk "/home/one/vdisk0" vdisk "/home/one/vdisk1" vnet } domain two { vcpu 1 memory 1G vdisk "/home/two/vdisk0" vdisk "/home/two/vdisk1" vnet } domain three { vcpu 1 memory 1G vdisk "/home/three/vdisk0" vdisk "/home/three/vdisk1" vnet } domain four { vcpu 1 memory 1G vdisk "/home/four/vdisk0" vdisk "/home/four/vdisk1" vnet } domain five { vcpu 1 memory 1G vdisk "/home/five/vdisk0" vdisk "/home/five/vdisk1" vnet } # dmesg console is /virtual-devices@100/console@1 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.3-current (GENERIC.MP) #118: Wed Jun 5 18:28:38 MDT 2013 dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP real mem = 8455716864 (8064MB) avail mem = 8305139712 (7920MB) mainbus0 at root: Sun Fire(TM) T1000 cpu0 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu1 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu2 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu3 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu4 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu5 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu6 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu7 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu8 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu9 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu10 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu11 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu12 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu13 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu14 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu15 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu16 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu17 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu18 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu19 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu20 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu21 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu22 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz cpu23 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz vbus0 at mainbus0 "flashprom" at vbus0 not configured cbus0 at vbus0 vldc0 at cbus0 vldcp0 at vldc0 chan 0x0: ivec 0x200, 0x201 channel "hvctl" "ldom-primary" at vldc0 chan 0x1 not configured "fmactl" at vldc0 chan 0x3 not configured vldc1 at cbus0 "ldmfma" at vldc1 chan 0x4 not configured vldc2 at cbus0 vldcp1 at vldc2 chan 0x14: ivec 0x228, 0x229 channel "spds" "system-management" at vldc2 chan 0xd not configured vcons0 at vbus0: ivec 0x111, console vrtc0 at vbus0 "fma" at vbus0 not configured "sunvts" at vbus0 not configured "sunmc" at vbus0 not configured "explorer" at vbus0 not configured "led" at vbus0 not configured "flashupdate" at vbus0 not configured "ncp" at vbus0 not configured vpci0 at mainbus0: bus 2 to 2, dvma map 80000000-ffffffff pci0 at vpci0 ebus0 at mainbus0 com0 at ebus0 addr c2c000-c2c007 ivec 0xa: st16650, 32 byte fifo vpci1 at mainbus0: bus 2 to 4, dvma map 80000000-ffffffff pci1 at vpci1 ppb0 at pci1 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3 pci2 at ppb0 bus 3 bge0 at pci2 dev 4 function 0 "Broadcom BCM5714" rev 0xa2, BCM5715 A1 (0x9001): ivec 0x7d4, address 00:14:4f:2c:e2:48 brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 bge1 at pci2 dev 4 function 1 "Broadcom BCM5714" rev 0xa2, BCM5715 A1 (0x9001): ivec 0x7d5, address 00:14:4f:2c:e2:49 brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 ppb1 at pci2 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb3 pci3 at ppb1 bus 4 bge2 at pci3 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): ivec 0x7c2, address 00:14:4f:2c:e2:4a brgphy2 at bge2 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 bge3 at pci3 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): ivec 0x7c1, address 00:14:4f:2c:e2:4b brgphy3 at bge3 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 mpi0 at pci3 dev 2 function 0 "Symbios Logic SAS1064" rev 0x02: msi scsibus0 at mpi0: 63 targets sd0 at scsibus0 targ 0 lun 0: <ATA, ST31000524AS, JC4B> SCSI3 0/direct fixed naa.5000c50045e761c2 sd0: 953869MB, 512 bytes/sector, 1953525168 sectors vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets bootpath: /pci@7c0,0/pci@0,0/pci@8,0/scsi@2,0/disk@0,0 root on sd0a (6f7f7705c7253071.a) swap on sd0b dump on sd0b
