Hi,
I built a kernel that include the fix in pf.c and everything is fine now.
Thanks,
Atanas Vladimirov
[ns]~$ uptime
5:37PM up 3 days, 3:44, 1 user, load averages: 1.23, 0.74, 0.64
[ns]~$ dmesg
OpenBSD 5.3-current (GENERIC) #0: Wed May 15 23:59:01 EEST 2013
vl...@ns.bsdbg.net:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(TM) XP1600+ ("AuthenticAMD" 686-class, 256KB L2 cache)
1.42 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MMXX,3DNOW2,3DNOW
real mem = 804765696 (767MB)
avail mem = 780185600 (744MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/03/03, BIOS32 rev. 0 @ 0xf0d00,
SMBIOS rev. 2.3 @ 0xf2bc0 (46 entries)
bios0: vendor Award Software, Inc. version "ASUS A7V266-C ACPI BIOS Rev
1014" date 03/03/2003
bios0: ASUSTeK Computer INC. A7V266-C
apm0 at bios0: Power Management spec V1.2 (BIOS management disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1572
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf14b0/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C586 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xcc000/0x1000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
viaagp0 at pchb0: v2
agp0 at viaagp0: aperture at 0xfe800000, size 0xe400000
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci0 dev 12 function 0 "S3 ViRGE DX/GX" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 13 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq
11, address 00:07:e9:10:32:a8
em1 at pci0 dev 15 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq
10, address 00:07:e9:10:2a:20
viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00: SMI
iic0 at viapm0
lm1 at iic0 addr 0x2d: AS99127F
viapm0: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 confi
gured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00ETA0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 12
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (b198b672451a33ab.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
