Hello,
When I use startx things works quite well with X-windows, but since I want
a multihead config I tried to run X -configure. That configuration doesn't
get very far though, it lists the available graphics drivers and then
chokes and gives "Segmentation fault at address 0x28". -The config that is
created is very basic but I note that it has entries for both intel and
vesa. -What can I do to get a more useful xorg.conf? Prevent the
segmentation fault?
xorg.conf.new:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/OTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "extmod"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # <str>
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card1"
Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
--------------
dmesg
OpenBSD 5.3-current (GENERIC.MP) #108: Tue Apr 30 11:35:41 MDT 2013
t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error
3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 8448847872 (8057MB)
avail mem = 8216231936 (7835MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf2210 (102 entries)
bios0: vendor Dell Inc. version "A09" date 09/12/2012
bios0: Dell Inc. Latitude XT3
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA SSDT MCFG HPET BOOT SSDT SSDT SLIC
acpi0: wakeup devices UAR1(S3) HDEF(S4) GLAN(S4) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4)
RP07(S4) PXSX(S4) RP08(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEG2(S4) PEG3(S4)
PXSX(S4) RP03(S4) EHC2(S1) EHCI(S1) LID_(S3) PBTN(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2794.09 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus 9 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (PEG0)
acpiprt10 at acpi0: bus -1 (PEG1)
acpiprt11 at acpi0: bus -1 (PEG2)
acpiprt12 at acpi0: bus -1 (PEG3)
acpiprt13 at acpi0: bus 3 (RP03)
acpiec0 at acpi0
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpitz0 at acpi0: critical temperature is 107 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "DELL 1NP0F2A" serial 18127 type LION oem
"Samsung SDI"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 2794 MHz: speeds: 2801, 2800, 2600, 2400, 2200,
2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1366x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
bc:30:5b:fc:2d:67
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: IDT/0x76e7, Intel/0x2805, using IDT/0x76e7
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34:
msi, MIMO 2T2R, MoW, address 84:3a:4b:4c:8b:c0
ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 9
vendor "O2 Micro", unknown product 0x13f7 (class serial bus subclass
Firewire, rev 0x05) at pci4 dev 0 function 0 not configured
sdhc0 at pci4 dev 0 function 1 vendor "O2 Micro", unknown product 0x8321
rev 0x05: apic 2 int 18
sdmmc0 at sdhc0
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI
1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG SSD PM83, CXM0> SCSI3 0/direct
fixed naa.5002538043584d30
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2
int 18
iic0 at ichiic0
lisa0 at iic0 addr 0x1d: lis331dl
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot #0)
pckbc0: using irq 12 for aux slot #0
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 4 "Dell Computer Corp DW375 Bluetooth Module" rev
2.00/5.17 addr 3
uvideo0 at uhub2 port 5 configuration 1 interface 0
"CN0M1VK77248728Q01C9A00 Laptop_Integrated_Webcam_HD" rev 2.00/12.24 addr 4
video0 at uvideo0
uhidev0 at uhub2 port 6 configuration 1 interface 0 "N-trig DuoSense" rev
2.00/71.00 addr 5
uhidev0: iclass 3/0, 10 report ids
uhid0 at uhidev0 reportid 1: input=0, output=0, feature=15
uhid1 at uhidev0 reportid 2: input=0, output=0, feature=31
uhid2 at uhidev0 reportid 3: input=0, output=0, feature=62
uhid3 at uhidev0 reportid 4: input=0, output=0, feature=254
uhid4 at uhidev0 reportid 5: input=0, output=0, feature=510
uhid5 at uhidev0 reportid 6: input=15, output=0, feature=0
uhid6 at uhidev0 reportid 7: input=31, output=0, feature=0
uhid7 at uhidev0 reportid 8: input=62, output=0, feature=0
uhid8 at uhidev0 reportid 9: input=254, output=0, feature=0
uhid9 at uhidev0 reportid 10: input=510, output=0, feature=0
uhidev1 at uhub2 port 6 configuration 1 interface 1 "N-trig DuoSense" rev
2.00/71.00 addr 5
uhidev1: iclass 3/0, 24 report ids
uhid10 at uhidev1 reportid 1: input=9, output=0, feature=0
uhts0 at uhidev1 reportid 2
wsmouse1 at uhts0 mux 0
uhts1 at uhidev1 reportid 3
wsmouse2 at uhts1 mux 0
uhid11 at uhidev1 reportid 4: input=0, output=0, feature=1
uhid12 at uhidev1 reportid 10: input=0, output=0, feature=1
uhid13 at uhidev1 reportid 11: input=0, output=0, feature=2
uhid14 at uhidev1 reportid 12: input=0, output=0, feature=6
uhid15 at uhidev1 reportid 13: input=0, output=0, feature=2
uhid16 at uhidev1 reportid 14: input=0, output=0, feature=2
uhid17 at uhidev1 reportid 15: input=0, output=0, feature=2
uhid18 at uhidev1 reportid 16: input=0, output=0, feature=2
uhid19 at uhidev1 reportid 17: input=0, output=0, feature=2
uhid20 at uhidev1 reportid 20: input=0, output=0, feature=2
uhid21 at uhidev1 reportid 21: input=0, output=0, feature=5
uhts2 at uhidev1 reportid 23
uhts2: touchscreen has no X report
uhid22 at uhidev1 reportid 24: input=0, output=0, feature=12
ugen1 at uhub2 port 6 configuration 1 "N-trig DuoSense" rev 2.00/71.00 addr
5
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen2 at uhub3 port 8 "Broadcom Corp 5880" rev 1.10/1.01 addr 3
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (884c2860ae63dfdb.a) swap on sd0b dump on sd0b
-----
Kind Regards
