Greetings all,

I was excited to try out smtpd because of future plans to go away from
webmail. Right after installing 5.3 I followed the directions in man smtpd
to make the switch. smtpd.conf is untouched, but here are the values anyway:

listen on lo0
table aliases db:/etc/mail/aliases.db
accept for local alias <aliases> deliver to mbox
accept for any relay

However, sending a test mail to myself yields two different errors. On my
server:
# echo 'test' | mail -s TEST scott
send-mail: command failed: 553 Sender address syntax error

on my desktop:
# echo 'test' | mail -s TEST scott
send-mail: command failed: 550 Invalid recipient

The same test works with sendmail enabled. What have I missed?

-Scott

dmesg (server):
OpenBSD 5.3 (RAMDISK_CD) #51: Tue Mar 12 18:27:15 MDT 2013
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 4292739072 (4093MB)
avail mem = 4158402560 (3965MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (41 entries)
bios0: vendor Sun Microsystems version "2.2.4" date 08/16/2006
bios0: Sun Microsystems Sun Ultra 20 Workstation
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT SRAT MCFG APIC
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 152, 2613.69 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 201MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB0)
pci0 at mainbus0 bus 0
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
"NVIDIA nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured
"NVIDIA nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int
20, version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 2 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
"NVIDIA nForce4 AC97" rev 0xa2 at pci0 dev 4 function 0 not configured
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DRU-810A, 1.0d> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide1: using apic 2 int 20 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3250823AS>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <ST31000528AS>
wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide2: using apic 2 int 20 for native-PCI interrupt
wd2 at pciide2 channel 1 drive 0: <ST31000528AS>
wd2: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd2(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 6
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"VIA VT6306 FireWire" rev 0x80 at pci1 dev 6 function 0 not configured
re0 at pci1 dev 7 function 0 "Linksys EG1032" rev 0x10: RTL8110S (0x0400),
apic 2 int 5, address 00:22:6b:bf:4a:40
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
ral0 at pci1 dev 8 function 0 "Ralink RT2760" rev 0x00: apic 2 int 7,
address 00:08:54:97:ff:11
ral0: MAC/BBP RT2860 (rev 0x0102), RF RT2720 (MIMO 1T2R)
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 2 int 20,
address 00:e0:81:5c:3a:e3
eephy0 at nfe0 phy 1: 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
uhidev0 at uhub1 port 4 configuration 1 interface 0 "Microsoft
Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 4 configuration 1 interface 1 "Microsoft
Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2
uhidev1: iclass 3/1, 28 report ids
uhid at uhidev1 reportid 18 not configured
uhid at uhidev1 reportid 22 not configured
uhid at uhidev1 reportid 23 not configured
uhid at uhidev1 reportid 26 not configured
uhid at uhidev1 reportid 28 not configured
uhidev2 at uhub1 port 4 configuration 1 interface 2 "Microsoft
Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2
uhidev2: iclass 3/0, 8 report ids
uhid at uhidev2 reportid 3 not configured
uhid at uhidev2 reportid 4 not configured
uhid at uhidev2 reportid 7 not configured
uhid at uhidev2 reportid 8 not configured
"APC Back-UPS ES 650 FW:842.J3 .D USB FW:J3" rev 1.10/1.06 addr 3 at uhub1
port 5 not configured
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 5.3 (GENERIC) #53: Tue Mar 12 18:15:44 MDT 2013
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 4292739072 (4093MB)
avail mem = 4156006400 (3963MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (41 entries)
bios0: vendor Sun Microsystems version "2.2.4" date 08/16/2006
bios0: Sun Microsystems Sun Ultra 20 Workstation
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT SRAT MCFG APIC
acpi0: wakeup devices HUB0(S5) XVR0(S5) XVR1(S5) XVR2(S5) XVR3(S5) USB0(S3)
USB2(S3) MMAC(S5) MMCI(S5) UAR1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 152, 2613.69 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 201MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB0)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PWRB
cpu0: Cool'n'Quiet K8 2613 MHz: speeds: 2600 2400 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
adt0 at iic0 addr 0x2e: sch5017 rev 0x89
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM ECC PC3200CL3.0
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM ECC PC3200CL3.0
spdmem2 at iic0 addr 0x52: 1GB DDR SDRAM ECC PC3200CL3.0
spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM ECC PC3200CL3.0
iic1 at nviic0
adt1 at iic1 addr 0x2e: sch5017 rev 0x89
spdmem4 at iic1 addr 0x50: 1GB DDR SDRAM ECC PC3200CL3.0
spdmem5 at iic1 addr 0x51: 1GB DDR SDRAM ECC PC3200CL3.0
spdmem6 at iic1 addr 0x52: 1GB DDR SDRAM ECC PC3200CL3.0
spdmem7 at iic1 addr 0x53: 1GB DDR SDRAM ECC PC3200CL3.0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int
20, version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 2 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: apic 2 int
20, nForce4 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DRU-810A, 1.0d> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide1: using apic 2 int 20 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3250823AS>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <ST31000528AS>
wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide2: using apic 2 int 20 for native-PCI interrupt
wd2 at pciide2 channel 1 drive 0: <ST31000528AS>
wd2: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd2(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 6
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"VIA VT6306 FireWire" rev 0x80 at pci1 dev 6 function 0 not configured
re0 at pci1 dev 7 function 0 "Linksys EG1032" rev 0x10: RTL8110S (0x0400),
apic 2 int 5, address 00:22:6b:bf:4a:40
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
ral0 at pci1 dev 8 function 0 "Ralink RT2760" rev 0x00: apic 2 int 7,
address 00:08:54:97:ff:11
ral0: MAC/BBP RT2860 (rev 0x0102), RF RT2720 (MIMO 1T2R)
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 2 int 20,
address 00:e0:81:5c:3a:e3
eephy0 at nfe0 phy 1: 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 4 configuration 1 interface 0 "Microsoft
Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 4 configuration 1 interface 1 "Microsoft
Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2
uhidev1: iclass 3/1, 28 report ids
uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev1 reportid 22: input=4, output=0, feature=0
uhid2 at uhidev1 reportid 23: input=0, output=0, feature=1
ums0 at uhidev1 reportid 26: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid3 at uhidev1 reportid 28: input=3, output=0, feature=0
uhidev2 at uhub1 port 4 configuration 1 interface 2 "Microsoft
Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2
uhidev2: iclass 3/0, 8 report ids
uhid4 at uhidev2 reportid 3: input=1, output=0, feature=0
uhid5 at uhidev2 reportid 4: input=1, output=0, feature=0
uhid6 at uhidev2 reportid 7: input=7, output=0, feature=0
uhid7 at uhidev2 reportid 8: input=1, output=0, feature=0
ugen0 at uhub1 port 5 "APC Back-UPS ES 650 FW:842.J3 .D USB FW:J3" rev
1.10/1.06 addr 3
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (27c7275e18f5e688.a) swap on wd0b dump on wd0b
syncing disks...

dmesg desktop:
OpenBSD 5.3 (GENERIC.MP) #58: Tue Mar 12 18:43:53 MDT 2013
    dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz ("GenuineIntel" 686-class) 1.87
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem  = 2120142848 (2021MB)
avail mem = 2074501120 (1978MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/13/07, BIOS32 rev. 0 @ 0xfd5d7,
SMBIOS rev. 2.4 @ 0xef530 (58 entries)
bios0: vendor LENOVO version "2MKT32AUS" date 03/13/2007
bios0: LENOVO 88089HU
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA ASF! MCFG APIC BOOT SSDT SSDT SSDT
acpi0: wakeup devices LAN_(S5) USB4(S3) USB5(S3) ESB2(S3) EXP1(S4) EXP2(S4)
EXP5(S4) EXP6(S4) USB1(S3) USB2(S3) USB3(S3) ESB1(S3) PCIB(S5) COM1(S4)
COM2(S4) AZAL(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-9
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz ("GenuineIntel" 686-class) 1.87
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus -1 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP5)
acpiprt5 at acpi0: bus -1 (EXP6)
acpiprt6 at acpi0: bus 10 (PCIB)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: IGD0
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000
cpu0: Enhanced SpeedStep 1861 MHz: speeds: 1867, 1600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 82Q965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q965 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q965 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP AMT" rev 0x02: msi, address
00:1a:4d:10:73:1e
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1983
audio0 at azalia0
uhci1 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16
uhci2 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 17
uhci3 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 16
ehci1: timed out waiting for BIOS
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci1 at ppb0 bus 10
pcib0 at pci0 dev 31 function 0 "Intel 82801HO LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 17 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HITACHI HDS7225SBSUN250G 0641N9DJHJ>
wd0: 16-sector PIO, LBA48, 238471MB, 488390625 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDRH10N, 0M04> ATAPI
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int
17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 18 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Thrustmaster USB
Compliant Keypad" rev 1.10/1.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 0 "Primax Electronics USB
Optical Mouse" rev 2.00/2.00 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub5 port 1 configuration 1 interface 0 "Microsoft
Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub5 port 1 configuration 1 interface 1 "Microsoft
Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2
uhidev3: iclass 3/1, 28 report ids
uhid0 at uhidev3 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev3 reportid 22: input=4, output=0, feature=0
uhid2 at uhidev3 reportid 23: input=0, output=0, feature=1
ums1 at uhidev3 reportid 26: 5 buttons, Z dir
wsmouse1 at ums1 mux 0
uhid3 at uhidev3 reportid 28: input=3, output=0, feature=0
uhidev4 at uhub5 port 1 configuration 1 interface 2 "Microsoft
Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2
uhidev4: iclass 3/0, 8 report ids
uhid4 at uhidev4 reportid 3: input=1, output=0, feature=0
uhid5 at uhidev4 reportid 4: input=1, output=0, feature=0
uhid6 at uhidev4 reportid 7: input=7, output=0, feature=0
uhid7 at uhidev4 reportid 8: input=1, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (373ef680e9ee75fd.a) swap on wd0b dump on wd0b

Reply via email to