acam...@verlet.org (Abel Abraham Camarillo Ojeda), 2013.05.06 (Mon) 11:27 (CEST): > search archives
That's what I call minimalism ;-) I did what you told me to in advance and there's only one hit close enough to care: Alexander Polakov snapshots SHA256 mismatch 2013-05-04 22:00:35 http://marc.info/?l=openbsd-misc&m=136770496915566 All other hit's for ``http://marc.info/?l=openbsd-misc&w=2&r=1&s=snapshot&q=b'' or ``http://marc.info/?l=openbsd-misc&w=2&r=1&s=sha256&q=b'' or ``http://marc.info/?l=openbsd-tech&w=2&r=1&s=snapshot&q=b'' or ``http://marc.info/?l=openbsd-tech&w=2&r=1&s=sha256&q=b'' are to old to care. Latest snapshot used by me with alle the checksums in SHA256 was downloaded 2013-04-28: OpenBSD 5.3-current (GENERIC.MP) #106: Thu Apr 25 16:37:24 MDT 2013 t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP Alexander's report talks of wrong checksums, /me of missing checksums. Therefore: A) Maybe you can give me a >2 words pointer? B) Read my original message? Bye, Marcus > On Mon, May 6, 2013 at 4:19 AM, MERIGHI Marcus <mcmer-open...@tor.at> wrote: > > my snapshot upgrade procedure just puked at me because it could not find > > a checksum for xbase53.tgz. This is on amd64, dmesg at the end. > > Below is the result of me going through all the archs and looking for > > x*.tgz checksums in the SHA256 files. I do know that this does not make > > sense for some archs because some do not even have x*.tgz file sets. > > > > alpha yes > > amd64 no > > armish yes > > hp300 no > > hppa no > > i386 no > > landisk yes > > loongson no > > luna88k no > > macppc no > > mvme68k no > > mvme88k no > > octeon yes > > sgi no > > socppc no > > sparc yes > > sparc64 no > > vax yes > > zaurus yes > > > > Of course I would like to know whether this is by mistake or an intended > > change (current.html does not tell anything about it). > > > > Bye, Marcus > > > > OpenBSD 5.3-current (GENERIC.MP) #106: Thu Apr 25 16:37:24 MDT 2013 > > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 3194331136 (3046MB) > > avail mem = 3101650944 (2957MB) > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf68e0 (62 entries) > > bios0: vendor Dell Inc. version "A18" date 12/06/2011 > > bios0: Dell Inc. Latitude D630 > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP HPET APIC ASF! MCFG TCPA SLIC SSDT > > acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0) > > USB5(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S3) RP02(S4) RP03(S3) RP04(S3) > > RP05(S3) RP06(S5) LID_(S3) PBTN(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.34 MHz > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF > > cpu0: 2MB 64b/line 8-way L2 cache > > cpu0: apic clock running at 199MHz > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.00 MHz > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF > > cpu1: 2MB 64b/line 8-way L2 cache > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > ioapic0: misconfigured as apic 0, remapped to apid 2 > > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > > acpiprt0 at acpi0: bus 3 (PCIE) > > acpiprt1 at acpi0: bus -1 (AGP_) > > acpiprt2 at acpi0: bus 11 (RP01) > > acpiprt3 at acpi0: bus 12 (RP02) > > acpiprt4 at acpi0: bus -1 (RP03) > > acpiprt5 at acpi0: bus -1 (RP04) > > acpiprt6 at acpi0: bus -1 (RP05) > > acpiprt7 at acpi0: bus 9 (RP06) > > acpiprt8 at acpi0: bus 0 (PCI0) > > acpicpu0 at acpi0: C3, C2, C1, PSS > > acpicpu1 at acpi0: C3, C2, C1, PSS > > acpitz0 at acpi0: critical temperature is 99 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: PBTN > > acpibtn2 at acpi0: SBTN > > acpiac0 at acpi0: AC unit online > > acpibat0 at acpi0: BAT0 model "DELL KP4331" serial 278 type LION oem "SMP" > > acpibat1 at acpi0: BAT1 not present > > acpidock0 at acpi0: GDCK not docked (0) > > acpivideo0 at acpi0: VID_ > > acpivideo1 at acpi0: VID_ > > acpivideo2 at acpi0: VID2 > > cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c > > vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c > > intagp0 at vga1 > > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 > > inteldrm0 at vga1 > > drm0 at inteldrm0 > > intel_overlay_map_regs partial stub > > inteldrm0: 1440x900 > > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > "Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured > > uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 20 > > uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 > > ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 22 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi > > azalia0: codecs: Sigmatel STAC9205X > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi > > pci1 at ppb0 bus 11 > > ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi > > pci2 at ppb1 bus 12 > > wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, > > MoW2, address 00:1f:3c:cc:e5:3c > > ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: msi > > pci3 at ppb2 bus 9 > > bge0 at pci3 dev 0 function 0 "Broadcom BCM5755M" rev 0x02, BCM5755 A2 > > (0xa002): apic 2 int 17, address 00:21:70:d9:e5:ab > > brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0 > > uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 20 > > uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 > > uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 22 > > ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 20 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2 > > pci4 at ppb3 bus 3 > > cbb0 at pci4 dev 1 function 0 "O2 Micro OZ711EZ1 CardBus" rev 0x21: apic 2 > > int 19 > > "O2 Micro Firewire" rev 0x02 at pci4 dev 1 function 4 not configured > > cardslot0 at cbb0 slot 0 flags 0 > > cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20 > > pcmcia0 at cardslot0 > > pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x02 > > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x02: DMA, > > channel 0 configured to compatibility, channel 1 configured to compatibility > > wd0 at pciide0 channel 0 drive 0: <WDC WD3200BEVE-00A0HT0> > > wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors > > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > > pciide0: channel 1 ignored (disabled) > > pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x02: DMA, > > channel 0 configured to native-PCI, channel 1 configured to native-PCI > > pciide1: using apic 2 int 18 for native-PCI interrupt > > wd1 at pciide1 channel 0 drive 0: <HITACHI HTS542516K9SA00> > > wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > > wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 > > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: SMI > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM > > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > > usb2 at uhci0: USB revision 1.0 > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci1: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb4 at uhci2: USB revision 1.0 > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot #0) > > pckbc0: using irq 12 for aux slot #0 > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > mtrr: Pentium Pro MTRR support > > uhub7 at uhub6 port 1 "O2 Micro OZ776 Hub" rev 1.10/1.10 addr 2 > > ugen0 at uhub7 port 2 "O2 O2Micro CCID SC Reader" rev 1.10/1.10 addr 3 > > vscsi0 at root > > scsibus0 at vscsi0: 256 targets > > softraid0 at root > > scsibus1 at softraid0: 256 targets > > root on wd1a (1c180c22e222ec49.a) swap on wd1b dump on wd1b > !DSPAM:518777d3208052072121109!
