I was disappointed to find the (admittedly cheap) adapter I bought for this
gifted Acer AspireOne didn't work. I already new the on-board wireless
chipset wasn't going to work, and I saw this review:
http://www.amazon.com/review/R20NYPJH13BJ8X for a USB wireless adapter.

See the last lines of the dmesg below. Also, attempts to set the nwid and
then use dhclient just give me a "no link" message.

-- devin


OpenBSD 5.3-current (GENERIC) #0: Sun Mar  3 22:47:56 EST 2013

   r...@atom.nacredata.net:/usr/src/sys/arch/i386/compile/GENERIC

RTC BIOS diagnostic error 80<clock_battery>

cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
GHz

cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF

real mem  = 1062227968 (1013MB)

avail mem = 1033887744 (985MB)

mainbus0 at root

bios0 at mainbus0: AT/286+ BIOS, date 02/20/09, SMBIOS rev. 2.4 @ 0xe7fc0
(29 entries)

bios0: vendor Acer version "V1.05" date 02/20/2009

bios0: Acer Aspire one

acpi0 at bios0: rev 2

acpi0: sleep states S3 S4 S5

acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT

acpi0: wakeup devices UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4)
EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)

acpitimer0 at acpi0: 3579545 Hz, 24 bits

acpihpet0 at acpi0: 14318179 Hz

acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat

cpu0 at mainbus0: apid 0 (boot processor)

cpu0: apic clock running at 133MHz

cpu at mainbus0: not configured

ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins

ioapic0: misconfigured as apic 0, remapped to apid 4

acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255

acpiprt0 at acpi0: bus 0 (PCI0)

acpiprt1 at acpi0: bus 1 (EXP1)

acpiprt2 at acpi0: bus 2 (EXP2)

acpiprt3 at acpi0: bus 3 (EXP3)

acpiprt4 at acpi0: bus -1 (EXP4)

acpiec0 at acpi0

acpicpu0 at acpi0: C3, C2, C1, PSS

acpipwrres0 at acpi0: FN00

acpitz0 at acpi0: critical temperature is 100 degC

acpibtn0 at acpi0: PWRB

acpibtn1 at acpi0: LID0

acpibtn2 at acpi0: SLPB

acpibat0 at acpi0: BAT0 model "GC86508SM60 " type Lion oem "Simplo "

acpiac0 at acpi0: AC unit online

acpivideo0 at acpi0: OVGA

bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000

cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz

pci0 at mainbus0 bus 0: configuration mode 1 (bios)

pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03

vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03

wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

intagp0 at vga1

agp0 at intagp0: aperture at 0x40000000, size 0x10000000

inteldrm0 at vga1: apic 4 int 16

drm0 at inteldrm0

"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured

azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi

azalia0: codecs: Realtek ALC272

audio0 at azalia0

ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16

pci1 at ppb0 bus 1

ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 16

ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2b:83:3f:58

ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17

pci2 at ppb1 bus 2

ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18

pci3 at ppb2 bus 3

ale0 at pci3 dev 0 function 0 "Attansic Technology L1E" rev 0xb0: AR8113,
msi, address 00:23:5a:49:56:12

atphy0 at ale0 phy 0: F1 10/100/1000 PHY, rev. 9

uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16

uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17

uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18

uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19

ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16

usb0 at ehci0: USB revision 2.0

uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1

ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2

pci4 at ppb3 bus 4

ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled

pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility

pciide0: channel 0 disabled (no drives)

pciide0: channel 1 ignored (disabled)

ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI
1.1

ahci0: PHY offline on port 2

scsibus0 at ahci0: 32 targets

sd0 at scsibus0 targ 0 lun 0: <ATA, FUJITSU MHZ2160B, 0081> SCSI3 0/direct
fixed naa.500000e0441acc03

sd0: 152627MB, 512 bytes/sector, 312581808 sectors

ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4
int 17

iic0 at ichiic0

spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM

usb1 at uhci0: USB revision 1.0

uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1

usb2 at uhci1: USB revision 1.0

uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1

usb3 at uhci2: USB revision 1.0

uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1

usb4 at uhci3: USB revision 1.0

uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1

isa0 at ichpcib0

isadma0 at isa0

pckbc0 at isa0 port 0x60/5

pckbd0 at pckbc0 (kbd slot)

pckbc0: using irq 1 for kbd slot

wskbd0 at pckbd0: console keyboard, using wsdisplay0

pms0 at pckbc0 (aux slot)

pckbc0: using irq 12 for aux slot

wsmouse0 at pms0 mux 0

pms0: Synaptics touchpad, firmware 7.2

pcppi0 at isa0 port 0x61

spkr0 at pcppi0

npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16

mtrr: Pentium Pro MTRR support

uvideo0 at uhub0 port 2 configuration 1 interface 0 "Sonix Technology Co.,
Ltd. WebCam" rev 2.00/1.00 addr 2

video0 at uvideo0

vscsi0 at root

scsibus1 at vscsi0: 256 targets

softraid0 at root

scsibus2 at softraid0: 256 targets

root on sd0a (6a654ace1854b106.a) swap on sd0b dump on sd0b

WARNING: / was not properly unmounted

rsu0 at uhub0 port 3 "Manufacturer Realtek RTL8191S WLAN Adapter" rev
2.00/2.00 addr 3

rsu0: MAC/BB RTL8712 cut 3, address 00:02:72:3b:d7:d9

rsu0 detached

rsu0 at uhub0 port 1 "Manufacturer Realtek RTL8191S WLAN Adapter" rev
2.00/2.00 addr 3

rsu0: MAC/BB RTL8712 cut 3, address 00:02:72:3b:d7:d9

rsu0: failed loadfirmware of file rsu-rtl8712fw (error 2)

rsu0: failed loadfirmware of file rsu-rtl8712fw (error 2)

syncing disks...

OpenBSD 5.3-current (GENERIC) #0: Sun Mar  3 22:47:56 EST 2013

   r...@atom.nacredata.net:/usr/src/sys/arch/i386/compile/GENERIC

RTC BIOS diagnostic error 80<clock_battery>

cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
GHz

cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF

real mem  = 1062227968 (1013MB)

avail mem = 1033887744 (985MB)

mainbus0 at root

bios0 at mainbus0: AT/286+ BIOS, date 02/20/09, SMBIOS rev. 2.4 @ 0xe7fc0
(29 entries)

bios0: vendor Acer version "V1.05" date 02/20/2009

bios0: Acer Aspire one

acpi0 at bios0: rev 2

acpi0: sleep states S3 S4 S5

acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT

acpi0: wakeup devices UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4)
EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)

acpitimer0 at acpi0: 3579545 Hz, 24 bits

acpihpet0 at acpi0: 14318179 Hz

acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat

cpu0 at mainbus0: apid 0 (boot processor)

cpu0: apic clock running at 132MHz

cpu at mainbus0: not configured

ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins

ioapic0: misconfigured as apic 0, remapped to apid 4

acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255

acpiprt0 at acpi0: bus 0 (PCI0)

acpiprt1 at acpi0: bus 1 (EXP1)

acpiprt2 at acpi0: bus 2 (EXP2)

acpiprt3 at acpi0: bus 3 (EXP3)

acpiprt4 at acpi0: bus -1 (EXP4)

acpiec0 at acpi0

acpicpu0 at acpi0: C3, C2, C1, PSS

acpipwrres0 at acpi0: FN00

acpitz0 at acpi0: critical temperature is 100 degC

acpibtn0 at acpi0: PWRB

acpibtn1 at acpi0: LID0

acpibtn2 at acpi0: SLPB

acpibat0 at acpi0: BAT0 model "GC86508SM60 " type Lion oem "Simplo "

acpiac0 at acpi0: AC unit offline

acpivideo0 at acpi0: OVGA

bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000

cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz

pci0 at mainbus0 bus 0: configuration mode 1 (bios)

pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03

vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03

wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

intagp0 at vga1

agp0 at intagp0: aperture at 0x40000000, size 0x10000000

inteldrm0 at vga1: apic 4 int 16

drm0 at inteldrm0

"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured

azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi

azalia0: codecs: Realtek ALC272

audio0 at azalia0

ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16

pci1 at ppb0 bus 1

ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 16

ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2b:83:3f:58

ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17

pci2 at ppb1 bus 2

ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18

pci3 at ppb2 bus 3

ale0 at pci3 dev 0 function 0 "Attansic Technology L1E" rev 0xb0: AR8113,
msi, address 00:23:5a:49:56:12

atphy0 at ale0 phy 0: F1 10/100/1000 PHY, rev. 9

uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16

uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17

uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18

uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19

ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16

usb0 at ehci0: USB revision 2.0

uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1

ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2

pci4 at ppb3 bus 4

ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled

pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility

pciide0: channel 0 disabled (no drives)

pciide0: channel 1 ignored (disabled)

ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI
1.1

ahci0: PHY offline on port 2

scsibus0 at ahci0: 32 targets

sd0 at scsibus0 targ 0 lun 0: <ATA, FUJITSU MHZ2160B, 0081> SCSI3 0/direct
fixed naa.500000e0441acc03

sd0: 152627MB, 512 bytes/sector, 312581808 sectors

ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4
int 17

iic0 at ichiic0

spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM

usb1 at uhci0: USB revision 1.0

uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1

usb2 at uhci1: USB revision 1.0

uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1

usb3 at uhci2: USB revision 1.0

uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1

usb4 at uhci3: USB revision 1.0

uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1

isa0 at ichpcib0

isadma0 at isa0

pckbc0 at isa0 port 0x60/5

pckbd0 at pckbc0 (kbd slot)

pckbc0: using irq 1 for kbd slot

wskbd0 at pckbd0: console keyboard, using wsdisplay0

pms0 at pckbc0 (aux slot)

pckbc0: using irq 12 for aux slot

wsmouse0 at pms0 mux 0

pms0: Synaptics touchpad, firmware 7.2

pcppi0 at isa0 port 0x61

spkr0 at pcppi0

npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16

mtrr: Pentium Pro MTRR support

rsu0 at uhub0 port 1 "Manufacturer Realtek RTL8191S WLAN Adapter" rev
2.00/2.00 addr 2

rsu0: MAC/BB RTL8712 cut 3, address 00:02:72:3b:d7:d9

uvideo0 at uhub0 port 2 configuration 1 interface 0 "Sonix Technology Co.,
Ltd. WebCam" rev 2.00/1.00 addr 3

video0 at uvideo0

vscsi0 at root

scsibus1 at vscsi0: 256 targets

softraid0 at root

scsibus2 at softraid0: 256 targets

root on sd0a (6a654ace1854b106.a) swap on sd0b dump on sd0b

rsu0: failed loadfirmware of file rsu-rtl8712fw (error 2)

rsu0: failed loadfirmware of file rsu-rtl8712fw (error 2)

rsu0: failed loadfirmware of file rsu-rtl8712fw (error 2)


-- 
Devin M. Ceartas, owner NacreData L.L.C.
nacred...@gmail.com
i...@nacredata.com
(919) 442-8899
AIM: nacredata
skype IM: nacredata

Reply via email to