Hello, I got today a Linksys USB200M network adapter and it doesn't seem to be attaching to axe. Should I return it and look for something else, or is it possible to add it?
OpenBSD 3.8-current (GENERIC) #171: Mon Nov 14 07:35:22 MST 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/zaurus/compile/GENERIC real mem = 67108864 (65536K) avail mem = 53313536 (52064K) using 844 buffers containing 3457024 bytes (3376K) of memory mainbus0 (root) cpu0 at mainbus0: PXA27x rev 7 (XScale core) cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu0: 32KB(32b/l,32way) I-cache, 32KB(32b/l,32way) wr-back-lock D-cache pxaip0 at mainbus0: CPU clock = 416.003 MHz pxaintc0 at pxaip0 addr 0x40d00000: Interrupt Controller pxagpio0 at pxaip0 addr 0x40e00000: GPIO Controller pxadmac0 at pxaip0 addr 0x40000000 intr 25: DMA Controller saost0 at pxaip0 addr 0x40a00000 saost0: SA-11x0 OS Timer com0 at pxaip0 addr 0x40100000 intr 22: pxa2x0, 32 byte fifo com1 at pxaip0 addr 0x40200000 intr 21: pxa2x0, 32 byte fifo com2 at pxaip0 addr 0x40700000 intr 20: pxa2x0, 32 byte fifo (SIR) pxaudc0 at pxaip0: USB Device Controller ohci0 at pxaip0, version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: PXA27x OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered lcd_pxaip0 at pxaip0 wsdisplay0 at lcd_pxaip0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1 added (std, vt100 emulation) zkbd0 at pxaip0 wskbd0 at zkbd0: console keyboard, using wsdisplay0 scoop0 at pxaip0: PCMCIA/GPIO controller scoop1 at pxaip0: PCMCIA/GPIO controller pxapcic0 at pxaip0: 2 slots pcmcia0 at pxapcic0 pcmcia1 at pxapcic0 zssp0 at pxaip0 apm0 at pxaip0 zts0 at pxaip0 wsmouse0 at zts0 mux 0 zaudio0 at pxaip0: I2C, I2S, WM8750 Audio audio0 at zaudio0 clock: hz=100 stathz=64 wdc0 at pcmcia0 function 0 "HITACHI, microdrive" port 0x0/16: irq 138 wd0 at wdc0 channel 0 drive 0: <HMS360604D5CF00> wd0 at wdc0 channel 0 drive 0: <HMS360604D5CF00> wd0: 32-sector PIO, LBA, 3906MB, 7999488 sectors wd0(wdc0:0:0): using BIOS timings wdc1 at pcmcia1 function 0 "64MB, , " port 0x0/16: irq 137 ugen0 at uhub0 port 2 ugen0: Cisco-Linksys USB200M v2, rev 2.00/0.01, addr 2 boot device: wd0. rootdev=0x1000 rrootdev=0x1000 rawdev=0x1002
