Finally I got it to work, but strangely my device comes up on /dev/cuaU1 not on /dev/cuaU0. Still have not tested the diff though.
2013/2/14 Maximo Pech <mak...@gmail.com> > The AT command thing did the trick, now I have some trouble setting up > ppp.conf, but I hope to get that sorted out. > > At this time I can't test the patch, but I promise to do it later. > > El miércoles, 13 de febrero de 2013, Kirill Bychkov escribió: > > On Thu, February 14, 2013 06:24, Maximo Pech wrote: >> > Hi list, I see this was asked before but never got solved, so I ask >> again. >> > >> > Has someone got this device working on openbsd? Is it supported? >> > >> > Thanks and regards. >> > >> > >> Hi. I plugged this modem on my Win7 notebook, installed software and >> drivers >> from it's internal "cd" and then connected with putty to it's second >> serial >> port (ZTE NMEA Device), whick answers on AT comand with OK. >> After that I send AT+ZCDRUN=8 to it to disable storage. Modem answered >> "Close >> autorun state result (0:FAIL 1^:SUCCESS):1" and modem's storage >> disappeared >> from "my computer". >> Now I have in dmesg: >> umsm0 at uhub0 port 3 configuration 1 interface 0 "ZTE, Incorporated ZTE >> CDMA >> Technologies MSM" rev 2.00/0.00 addr 2 >> umsm0: missing endpoint >> umsm1 at uhub0 port 3 configuration 1 interface 1 "ZTE, Incorporated ZTE >> CDMA >> Technologies MSM" rev 2.00/0.00 addr 2 >> umsm1: missing endpoint >> umass0 at uhub0 port 3 configuration 1 interface 2 "ZTE, Incorporated ZTE >> CDMA >> Technologies MSM" rev 2.00/0.00 addr 2 >> umass0: using SCSI over Bulk-Only >> scsibus5 at umass0: 2 targets, initiator 0 >> sd3 at scsibus5 targ 1 lun 0: <ZTE, MMC Storage, 322> SCSI2 0/direct >> removable >> serial.19d20031567890ABCDEF >> umsm2 at uhub0 port 3 configuration 1 interface 3 "ZTE, Incorporated ZTE >> CDMA >> Technologies MSM" rev 2.00/0.00 addr 2 >> ucom0 at umsm2 >> >> At least 'cu -l /dev/cuaU0 -s 9600' answers OK on AT. >> I have no usable SIM for this provider-locked modem, so I can't fully >> test it. >> >> To backout modem to default "windoze-compatible" mode send AT+ZCDRUN=9 to >> modem with cu. >> I hope this will help.
