Hello,
I use a KVM switch to control various computers, including my OpenBSD
5.2 router.
If I boot with console attached to the OpenBSD computer, it works well,
I'm able to control it, login, etc.
But when I switch to another computer, then back to OpenBSD, I get
display but no keyboard. The KVM del blinks as it does not get data from
the USB interface, and no event goes to dmesg.
Is there any configuration to let it handle (dis-)connections of
keyboard ?
Thanks,
NB: CW910 is a GENERIC kernel which lives on a ramdisk
--
Bastien
OpenBSD 5.2 (CW910) #0: Tue Jan 8 02:48:24 MST 2013
r...@spice-3.geekwu.org:/obj/CW910
cpu0: Intel(R) Celeron(R) M processor 600MHz ("GenuineIntel" 686-class) 600 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF
real mem = 534179840 (509MB)
avail mem = 463036416 (441MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/16/08, BIOS32 rev. 0 @ 0xfaa80, SMBIOS
rev. 2.2 @ 0xf0800 (34 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 09/16/2008
apm0 at bios0: Power Management spec V1.2 (slowidle)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde80/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 6 9 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DBM LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xd400! 0xd0000/0x1800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x8000000
inteldrm0 at vga1: irq 11
drm0 at inteldrm0
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 9
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 6
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
pci1 at ppb0 bus 1
fxp0 at pci1 dev 0 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11, address
00:02:b3:ca:2d:1e
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
re0 at pci1 dev 1 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), irq 12, address 00:06:4f:66:40:00
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
re1 at pci1 dev 2 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), irq 10, address 00:06:4f:66:40:01
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
hifn0 at pci1 dev 6 function 0 "Hifn 7955/7954" rev 0x00: LZS 3DES ARC4 MD5
SHA1 RNG AES PK, 32KB dram, irq 9
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <FLASH CARD>
wd0: 1-sector PIO, LBA, 1919MB, 3931200 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: irq 12
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL2.5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
com2: probed fifo depth: 15 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8712F rev 7, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub4 at uhub1 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "CHESEN USB Keyboard" rev
1.10/1.10 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "CHESEN USB Keyboard" rev
1.10/1.10 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub4 port 3 configuration 1 interface 0 "No brand 4 Port
KVMSwicther" rev 1.10/1.00 addr 4
uhidev2: iclass 3/0
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub4 port 3 configuration 1 interface 1 "No brand 4 Port
KVMSwicther" rev 1.10/1.00 addr 4
uhidev3: no input interrupt endpoint
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev2 detached
uhidev3 detached
uhub4 detached
