Hi,
Running startx results in a blank screen, able to switch some consoles
ok & terminate X without any problem.
dmesg:
http://marc.info/?l=openbsd-misc&m=135709569714792&w=2
Xorg.0.log:
[ 59.044] (--) checkDevMem: using aperture driver /dev/xf86
[ 59.064] (--) Using wscons driver on /dev/ttyC4 in pcvt
compatibility mode (version 3.32)
[ 59.075]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 59.075] X Protocol Version 11, Revision 0
[ 59.075] Build Operating System: OpenBSD 5.2 amd64
[ 59.075] Current Operating System: OpenBSD somewhere.local 5.2
GENERIC.MP#0 amd64
[ 59.075] Build Date: 04 December 2012 12:53:54PM
[ 59.075]
[ 59.075] Current version of pixman: 0.28.0
[ 59.075] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 59.075] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 59.075] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 2
06:51:40 2013
[ 59.077] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 59.077] (==) No Layout section. Using the first Screen section.
[ 59.077] (==) No screen section available. Using defaults.
[ 59.077] (**) |-->Screen "Default Screen Section" (0)
[ 59.077] (**) | |-->Monitor "<default monitor>"
[ 59.078] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 59.078] (==) Disabling SIGIO handlers for input devices
[ 59.078] (==) Automatically adding devices
[ 59.078] (==) Automatically enabling devices
[ 59.083] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 59.083] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 59.083] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 59.083] (II) Loader magic: 0x15a6140b53e0
[ 59.083] (II) Module ABI versions:
[ 59.083] X.Org ANSI C Emulation: 0.4
[ 59.083] X.Org Video Driver: 12.0
[ 59.083] X.Org XInput driver : 16.0
[ 59.083] X.Org Server Extension : 6.0
[ 59.083] (--) PCI:*(0:0:2:0) 8086:0166:106b:00ea rev 9, Mem @
0xa0000000/4194304, 0x90000000/268435456, I/O @ 0x00002000/64
[ 59.083] (II) LoadModule: "extmod"
[ 59.086] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[ 59.087] (II) Module extmod: vendor="X.Org Foundation"
[ 59.087] compiled for 1.12.3, module version = 1.0.0
[ 59.087] Module class: X.Org Server Extension
[ 59.087] ABI class: X.Org Server Extension, version 6.0
[ 59.087] (II) Loading extension MIT-SCREEN-SAVER
[ 59.087] (II) Loading extension XFree86-VidModeExtension
[ 59.087] (II) Loading extension XFree86-DGA
[ 59.087] (II) Loading extension DPMS
[ 59.087] (II) Loading extension XVideo
[ 59.087] (II) Loading extension XVideo-MotionCompensation
[ 59.087] (II) Loading extension X-Resource
[ 59.087] (II) LoadModule: "dbe"
[ 59.087] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[ 59.088] (II) Module dbe: vendor="X.Org Foundation"
[ 59.088] compiled for 1.12.3, module version = 1.0.0
[ 59.088] Module class: X.Org Server Extension
[ 59.088] ABI class: X.Org Server Extension, version 6.0
[ 59.088] (II) Loading extension DOUBLE-BUFFER
[ 59.088] (II) LoadModule: "glx"
[ 59.089] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 59.090] (II) Module glx: vendor="X.Org Foundation"
[ 59.090] compiled for 1.12.3, module version = 1.0.0
[ 59.090] ABI class: X.Org Server Extension, version 6.0
[ 59.090] (==) AIGLX enabled
[ 59.090] (II) Loading extension GLX
[ 59.090] (II) LoadModule: "record"
[ 59.091] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[ 59.092] (II) Module record: vendor="X.Org Foundation"
[ 59.092] compiled for 1.12.3, module version = 1.13.0
[ 59.092] Module class: X.Org Server Extension
[ 59.092] ABI class: X.Org Server Extension, version 6.0
[ 59.092] (II) Loading extension RECORD
[ 59.092] (II) LoadModule: "dri"
[ 59.092] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[ 59.093] (II) Module dri: vendor="X.Org Foundation"
[ 59.093] compiled for 1.12.3, module version = 1.0.0
[ 59.093] ABI class: X.Org Server Extension, version 6.0
[ 59.093] (II) Loading extension XFree86-DRI
[ 59.094] (II) LoadModule: "dri2"
[ 59.094] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 59.095] (II) Module dri2: vendor="X.Org Foundation"
[ 59.095] compiled for 1.12.3, module version = 1.2.0
[ 59.095] ABI class: X.Org Server Extension, version 6.0
[ 59.095] (II) Loading extension DRI2
[ 59.095] (==) Matched intel as autoconfigured driver 0
[ 59.095] (==) Matched vesa as autoconfigured driver 1
[ 59.095] (==) Assigned the driver to the xf86ConfigLayout
[ 59.095] (II) LoadModule: "intel"
[ 59.095] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 59.098] (II) Module intel: vendor="X.Org Foundation"
[ 59.098] compiled for 1.12.3, module version = 2.12.0
[ 59.098] Module class: X.Org Video Driver
[ 59.098] ABI class: X.Org Video Driver, version 12.0
[ 59.098] (II) LoadModule: "vesa"
[ 59.099] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 59.099] (II) Module vesa: vendor="X.Org Foundation"
[ 59.099] compiled for 1.12.3, module version = 2.3.2
[ 59.099] Module class: X.Org Video Driver
[ 59.099] ABI class: X.Org Video Driver, version 12.0
[ 59.099] (II) intel: Driver for Intel Integrated Graphics Chipsets:
i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2),
Ivybridge Server (GT1), Ivybridge Server (GT2)
[ 59.100] (II) VESA: driver for VESA chipsets: vesa
[ 59.100] (WW) Falling back to old probe method for vesa
[ 59.100] (II) Loading sub module "vgahw"
[ 59.100] (II) LoadModule: "vgahw"
[ 59.101] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[ 59.102] (II) Module vgahw: vendor="X.Org Foundation"
[ 59.102] compiled for 1.12.3, module version = 0.1.0
[ 59.102] ABI class: X.Org Video Driver, version 12.0
[ 59.102] (II) Loading sub module "ramdac"
[ 59.102] (II) LoadModule: "ramdac"
[ 59.102] (II) Module "ramdac" already built-in
[ 59.102] drmOpenDevice: node name is /dev/drm0
[ 59.102] drmOpenDevice: open result is 10, (OK)
[ 59.102] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 59.102] drmOpenDevice: node name is /dev/drm0
[ 59.102] drmOpenDevice: open result is 10, (OK)
[ 59.102] drmOpenByBusid: drmOpenMinor returns 10
[ 59.103] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 59.103] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 59.103] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 59.103] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 59.103] (==) intel(0): RGB weight 888
[ 59.103] (==) intel(0): Default visual is TrueColor
[ 59.103] (II) intel(0): Integrated Graphics Chipset: Intel(R)
Ivybridge Mobile (GT2)
[ 59.103] (--) intel(0): Chipset: "Ivybridge Mobile (GT2)"
[ 59.103] (--) intel(0): Linear framebuffer at 0x90000000
[ 59.103] (--) intel(0): IO registers at addr 0xA0000000 size 4194304
[ 59.103] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 59.103] (II) intel(0): No SDVO device is found in VBT
[ 59.104] (II) intel(0): 2 display pipes available.
[ 59.104] (II) Loading sub module "ddc"
[ 59.104] (II) LoadModule: "ddc"
[ 59.104] (II) Module "ddc" already built-in
[ 59.104] (II) Loading sub module "i2c"
[ 59.104] (II) LoadModule: "i2c"
[ 59.104] (II) Module "i2c" already built-in
[ 59.105] (II) intel(0): Output VGA has no monitor section
[ 59.105] (II) intel(0): Output HDMI-3 has no monitor section
[ 59.105] (II) intel(0): I2C bus "HDMIB" initialized.
[ 59.105] (II) intel(0): HDMI-3 output detected
[ 59.105] (II) intel(0): Output HDMI-4 has no monitor section
[ 59.105] (II) intel(0): I2C bus "HDMIC" initialized.
[ 59.105] (II) intel(0): HDMI-4 output detected
[ 59.140] (II) intel(0): EDID for output VGA
[ 59.140] (II) intel(0): I2C device "HDMIB:ddc2" registered at
address 0xA0.
[ 59.143] (II) intel(0): EDID for output HDMI-3
[ 59.143] (II) intel(0): EDID for output HDMI-3
[ 59.143] (II) intel(0): I2C device "HDMIC:ddc2" registered at
address 0xA0.
[ 59.147] (II) intel(0): EDID for output HDMI-4
[ 59.147] (II) intel(0): EDID for output HDMI-4
[ 59.147] (II) intel(0): Output VGA disconnected
[ 59.147] (II) intel(0): Output HDMI-3 disconnected
[ 59.147] (II) intel(0): Output HDMI-4 disconnected
[ 59.147] (WW) intel(0): No outputs definitely connected, trying again...
[ 59.147] (II) intel(0): Output VGA disconnected
[ 59.147] (II) intel(0): Output HDMI-3 disconnected
[ 59.147] (II) intel(0): Output HDMI-4 disconnected
[ 59.147] (WW) intel(0): Unable to find connected outputs - setting
1024x768 initial framebuffer
[ 59.147] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[ 59.147] (II) intel(0): detected 512 kB GTT.
[ 59.147] (II) intel(0): detected 65532 kB stolen memory.
[ 59.147] (==) intel(0): video overlay key set to 0x101fe
[ 59.147] (==) intel(0): DPI set to (96, 96)
[ 59.147] (II) Loading sub module "fb"
[ 59.147] (II) LoadModule: "fb"
[ 59.148] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 59.149] (II) Module fb: vendor="X.Org Foundation"
[ 59.149] compiled for 1.12.3, module version = 1.0.0
[ 59.149] ABI class: X.Org ANSI C Emulation, version 0.4
[ 59.149] (II) Loading sub module "int10"
[ 59.149] (II) LoadModule: "int10"
[ 59.150] (II) Loading /usr/X11R6/lib/modules/libint10.so
[ 59.151] (II) Module int10: vendor="X.Org Foundation"
[ 59.151] compiled for 1.12.3, module version = 1.0.0
[ 59.151] ABI class: X.Org Video Driver, version 12.0
[ 59.152] (II) intel(0): Primary V_BIOS segment is: 0xc000
[ 59.152] (--) intel(0): Console VGA mode is 0x3
[ 59.152] (II) UnloadModule: "vesa"
[ 59.152] (II) Unloading vesa
[ 59.153] (==) Depth 24 pixmap format is 32 bpp
[ 59.153] (II) intel(0): Kernel reported 1006592 total, 0 used
[ 59.153] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available
[ 59.153] (WW) intel(0): DRI disabled on Sandy Bridge chipsets
[ 59.153] (**) intel(0): Shadow buffer enabled, 2D GPU acceleration
disabled.
[ 59.153] (**) intel(0): Framebuffer tiled
[ 59.153] (**) intel(0): Pixmaps tiled
[ 59.153] (**) intel(0): 3D buffers tiled
[ 59.153] (**) intel(0): SwapBuffers wait enabled
[ 59.159] (==) intel(0): VideoRam: 262144 KB
[ 59.159] (II) intel(0): Allocated new frame buffer 1024x768 stride
4096, tiled
[ 59.163] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03b0
[ 59.165] (II) UXA(0): Driver registered support for the following
operations:
[ 59.165] (II) solid
[ 59.165] (II) copy
[ 59.165] (II) composite (RENDER acceleration)
[ 59.165] (II) put_image
[ 59.165] (II) get_image
[ 59.165] (==) intel(0): Backing store disabled
[ 59.165] (==) intel(0): Silken mouse disabled
[ 59.165] (II) intel(0): Initializing HW Cursor
[ 59.200] Plane disable
[ 59.240] Pipe disable
[ 59.280] PFIT disable
[ 59.280] FDI TX disable
[ 59.280] FDI RX disable
[ 59.300] FDI TX train 1 preload
[ 59.300] FDI RX train 1 preload
[ 59.320] Transcoder disable
[ 59.340] PCH DPLL disable
[ 59.340] FDI RX PLL PCD disable
[ 59.340] FDI TX PLL disable 00020040
[ 59.360] FDI RX PLL disable 00040000
[ 59.380] DPMS off done
[ 59.400] Plane disable
[ 59.400] Pipe disable
[ 59.420] PFIT disable
[ 59.420] FDI TX disable
[ 59.420] FDI RX disable
[ 59.440] FDI TX train 1 preload
[ 59.440] FDI RX train 1 preload
[ 59.460] Transcoder disable
[ 59.480] PCH DPLL disable
[ 59.480] FDI RX PLL PCD disable
[ 59.480] FDI TX PLL disable 00000040
[ 59.500] FDI RX PLL disable 00040000
[ 59.520] DPMS off done
[ 59.587] (II) intel(0): Fixed memory allocation layout:
[ 59.587] (II) intel(0): 0x03fff000: end of stolen memory
[ 59.587] (II) intel(0): 0x03fff000-0x0fffffff: DRI memory manager
(196612 kB)
[ 59.587] (II) intel(0): 0x10000000: end of aperture
[ 59.587] (II) intel(0): BO memory allocation layout:
[ 59.587] (II) intel(0): 0x03fff000: start of memory manager
[ 59.587] (II) intel(0): 0x04352000-0x0435bfff: HW cursors (40 kB)
[ 59.587] (II) intel(0): 0x10000000: end of memory manager
[ 59.590] Plane disable
[ 59.590] Pipe disable
[ 59.610] PFIT disable
[ 59.610] FDI TX disable
[ 59.610] FDI RX disable
[ 59.630] FDI TX train 1 preload
[ 59.630] FDI RX train 1 preload
[ 59.650] Transcoder disable
[ 59.670] PCH DPLL disable
[ 59.670] FDI RX PLL PCD disable
[ 59.670] FDI TX PLL disable 00020040
[ 59.690] FDI RX PLL disable 00040000
[ 59.710] DPMS off done
[ 59.730] Plane disable
[ 59.730] Pipe disable
[ 59.750] PFIT disable
[ 59.750] FDI TX disable
[ 59.750] FDI RX disable
[ 59.770] FDI TX train 1 preload
[ 59.770] FDI RX train 1 preload
[ 59.790] Transcoder disable
[ 59.810] PCH DPLL disable
[ 59.810] FDI RX PLL PCD disable
[ 59.810] FDI TX PLL disable 00000040
[ 59.830] FDI RX PLL disable 00040000
[ 59.850] DPMS off done
[ 59.870] Plane disable
[ 59.870] Pipe disable
[ 59.890] PFIT disable
[ 59.890] FDI TX disable
[ 59.890] FDI RX disable
[ 59.910] FDI TX train 1 preload
[ 59.910] FDI RX train 1 preload
[ 59.930] Transcoder disable
[ 59.950] PCH DPLL disable
[ 59.950] FDI RX PLL PCD disable
[ 59.950] FDI TX PLL disable 00020040
[ 59.970] FDI RX PLL disable 00040000
[ 59.990] DPMS off done
[ 60.010] Plane disable
[ 60.010] Pipe disable
[ 60.030] PFIT disable
[ 60.030] FDI TX disable
[ 60.030] FDI RX disable
[ 60.050] FDI TX train 1 preload
[ 60.050] FDI RX train 1 preload
[ 60.070] Transcoder disable
[ 60.090] PCH DPLL disable
[ 60.090] FDI RX PLL PCD disable
[ 60.090] FDI TX PLL disable 00000040
[ 60.110] FDI RX PLL disable 00040000
[ 60.130] DPMS off done
[ 60.150] (II) intel(0): Output configuration:
[ 60.150] (II) intel(0): Pipe A is off
[ 60.150] (II) intel(0): Display plane A is now disabled and
connected to pipe A.
[ 60.150] (II) intel(0): Pipe B is off
[ 60.150] (II) intel(0): Display plane B is now disabled and
connected to pipe B.
[ 60.150] (II) intel(0): Output VGA is connected to pipe none
[ 60.150] (II) intel(0): Output HDMI-3 is connected to pipe none
[ 60.150] (II) intel(0): Output HDMI-4 is connected to pipe none
[ 60.150] (II) intel(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 60.152] (==) intel(0): DPMS enabled
[ 60.152] (==) intel(0): Intel XvMC decoder enabled
[ 60.153] (WW) intel(0): Disabling Xv because no adaptors could be
initialized.
[ 60.153] (II) intel(0): direct rendering: Failed
[ 60.153] (--) RandR disabled
[ 60.153] (II) Initializing built-in extension Generic Event Extension
[ 60.153] (II) Initializing built-in extension SHAPE
[ 60.153] (II) Initializing built-in extension MIT-SHM
[ 60.153] (II) Initializing built-in extension XInputExtension
[ 60.153] (II) Initializing built-in extension XTEST
[ 60.153] (II) Initializing built-in extension BIG-REQUESTS
[ 60.153] (II) Initializing built-in extension SYNC
[ 60.153] (II) Initializing built-in extension XKEYBOARD
[ 60.153] (II) Initializing built-in extension XC-MISC
[ 60.153] (II) Initializing built-in extension SECURITY
[ 60.153] (II) Initializing built-in extension XINERAMA
[ 60.153] (II) Initializing built-in extension XFIXES
[ 60.153] (II) Initializing built-in extension RENDER
[ 60.153] (II) Initializing built-in extension RANDR
[ 60.153] (II) Initializing built-in extension COMPOSITE
[ 60.153] (II) Initializing built-in extension DAMAGE
[ 60.169] (II) AIGLX: Screen 0 is not DRI2 capable
[ 60.169] (II) AIGLX: Screen 0 is not DRI capable
[ 60.169] (EE) AIGLX error: dlopen of
/usr/X11R6/lib/modules/dri/swrastg_dri.so failed (File not found)
[ 60.194] (II) AIGLX: Loaded and initialized swrast
[ 60.194] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 60.340] (II) config/wscons: checking input device /dev/wskbd
[ 60.340] (II) wskbd: using layout us
[ 60.340] (II) wskbd: using variant dvorak
[ 60.340] (II) LoadModule: "kbd"
[ 60.341] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 60.342] (II) Module kbd: vendor="X.Org Foundation"
[ 60.342] compiled for 1.12.3, module version = 1.6.2
[ 60.342] Module class: X.Org XInput Driver
[ 60.342] ABI class: X.Org XInput driver, version 16.0
[ 60.342] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 60.342] (**) /dev/wskbd: always reports core events
[ 60.342] (**) /dev/wskbd: always reports core events
[ 60.342] (**) Option "Protocol" "standard"
[ 60.342] (**) Option "XkbRules" "base"
[ 60.342] (**) Option "XkbModel" "pc105"
[ 60.342] (**) Option "XkbLayout" "us"
[ 60.342] (**) Option "XkbVariant" "dvorak"
[ 60.342] (II) XINPUT: Adding extended input device "/dev/wskbd"
(type: KEYBOARD, id 6)
[ 60.377] (II) config/wscons: checking input device /dev/wsmouse
[ 60.377] (II) LoadModule: "ws"
[ 60.378] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 60.379] (II) Module ws: vendor="X.Org Foundation"
[ 60.379] compiled for 1.12.3, module version = 1.3.0
[ 60.379] Module class: X.Org XInput Driver
[ 60.379] ABI class: X.Org XInput driver, version 16.0
[ 60.379] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 60.379] (**) /dev/wsmouse: always reports core events
[ 60.379] (II) ws: /dev/wsmouse: debuglevel 0
[ 60.379] (**) Option "Device" "/dev/wsmouse"
[ 60.379] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 60.379] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 60.379] (**) ws: /dev/wsmouse: associated screen: 0
[ 60.379] (II) ws: /dev/wsmouse: minimum x position: 0
[ 60.379] (II) ws: /dev/wsmouse: maximum x position: 1023
[ 60.379] (II) ws: /dev/wsmouse: minimum y position: 0
[ 60.379] (II) ws: /dev/wsmouse: maximum y position: 767
[ 60.379] (==) ws: /dev/wsmouse: Buttons: 7
[ 60.380] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 60.380] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 7)
[ 60.380] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 60.380] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 60.380] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 60.380] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 69.360] Plane disable
[ 69.400] Pipe disable
[ 69.440] PFIT disable
[ 69.440] FDI TX disable
[ 69.440] FDI RX disable
[ 69.460] FDI TX train 1 preload
[ 69.460] FDI RX train 1 preload
[ 69.480] Transcoder disable
[ 69.500] PCH DPLL disable
[ 69.500] FDI RX PLL PCD disable
[ 69.500] FDI TX PLL disable 00020040
[ 69.520] FDI RX PLL disable 00040000
[ 69.540] DPMS off done
[ 69.560] Plane disable
[ 69.560] Pipe disable
[ 69.580] PFIT disable
[ 69.580] FDI TX disable
[ 69.580] FDI RX disable
[ 69.600] FDI TX train 1 preload
[ 69.600] FDI RX train 1 preload
[ 69.620] Transcoder disable
[ 69.640] PCH DPLL disable
[ 69.640] FDI RX PLL PCD disable
[ 69.640] FDI TX PLL disable 00000040
[ 69.660] FDI RX PLL disable 00040000
[ 69.680] DPMS off done
[ 69.746] (II) intel(0): Fixed memory allocation layout:
[ 69.746] (II) intel(0): 0x03fff000: end of stolen memory
[ 69.746] (II) intel(0): 0x03fff000-0x0fffffff: DRI memory manager
(196612 kB)
[ 69.746] (II) intel(0): 0x10000000: end of aperture
[ 69.746] (II) intel(0): BO memory allocation layout:
[ 69.746] (II) intel(0): 0x03fff000: start of memory manager
[ 69.746] (II) intel(0): 0x042ff000-0x04308fff: HW cursors (40 kB)
[ 69.746] (II) intel(0): 0x10000000: end of memory manager
[ 69.749] Plane disable
[ 69.749] Pipe disable
[ 69.760] PFIT disable
[ 69.760] FDI TX disable
[ 69.760] FDI RX disable
[ 69.780] FDI TX train 1 preload
[ 69.780] FDI RX train 1 preload
[ 69.800] Transcoder disable
[ 69.820] PCH DPLL disable
[ 69.820] FDI RX PLL PCD disable
[ 69.820] FDI TX PLL disable 00020040
[ 69.840] FDI RX PLL disable 00040000
[ 69.860] DPMS off done
[ 69.880] Plane disable
[ 69.880] Pipe disable
[ 69.900] PFIT disable
[ 69.900] FDI TX disable
[ 69.900] FDI RX disable
[ 69.920] FDI TX train 1 preload
[ 69.920] FDI RX train 1 preload
[ 69.940] Transcoder disable
[ 69.960] PCH DPLL disable
[ 69.960] FDI RX PLL PCD disable
[ 69.960] FDI TX PLL disable 00000040
[ 69.980] FDI RX PLL disable 00040000
[ 70.000] DPMS off done
[ 70.020] Plane disable
[ 70.020] Pipe disable
[ 70.040] PFIT disable
[ 70.040] FDI TX disable
[ 70.040] FDI RX disable
[ 70.060] FDI TX train 1 preload
[ 70.060] FDI RX train 1 preload
[ 70.080] Transcoder disable
[ 70.100] PCH DPLL disable
[ 70.100] FDI RX PLL PCD disable
[ 70.100] FDI TX PLL disable 00020040
[ 70.120] FDI RX PLL disable 00040000
[ 70.140] DPMS off done
[ 70.160] Plane disable
[ 70.160] Pipe disable
[ 70.180] PFIT disable
[ 70.180] FDI TX disable
[ 70.180] FDI RX disable
[ 70.200] FDI TX train 1 preload
[ 70.200] FDI RX train 1 preload
[ 70.220] Transcoder disable
[ 70.240] PCH DPLL disable
[ 70.240] FDI RX PLL PCD disable
[ 70.240] FDI TX PLL disable 00000040
[ 70.260] FDI RX PLL disable 00040000
[ 70.280] DPMS off done
[ 70.300] (II) intel(0): Output configuration:
[ 70.300] (II) intel(0): Pipe A is off
[ 70.300] (II) intel(0): Display plane A is now disabled and
connected to pipe A.
[ 70.300] (II) intel(0): Pipe B is off
[ 70.300] (II) intel(0): Display plane B is now disabled and
connected to pipe B.
[ 70.300] (II) intel(0): Output VGA is connected to pipe none
[ 70.300] (II) intel(0): Output HDMI-3 is connected to pipe none
[ 70.300] (II) intel(0): Output HDMI-4 is connected to pipe none
[ 75.955] (II) UnloadModule: "ws"
[ 75.955] (II) UnloadModule: "kbd"
[ 75.967] Server terminated successfully (0). Closing log file.
