Am Montag, 03. Dezember 2012 17:57 CET, Tony Berth <tonybe...@googlemail.com> schrieb: > it is the current one (2012-12-02)
> > OpenBSD 5.2 (RAMDISK_CD) #287: Wed Aug 1 10:19:00 MDT 2012 > > der...@i386.openbsd.org:/usr/src/sys/sys/arch/i386/compile/RAMDISK_CD but dmesg says its not so current like you think it is. Sebastian > > Thanks > > On Mon, Dec 3, 2012 at 6:52 PM, Kenneth R Westerback <kwesterb...@rogers.com > > wrote: > > > On Mon, Dec 03, 2012 at 06:08:34PM +0200, Tony Berth wrote: > > > here is the installation dmesg when trying to install the 5.2 i386 > > snapshot: > > > > And the installation dmesg from a -current snapshot would be even > > more useful. > > > > .... Ken > > > > > > > > ----- > > > LSI Logic Corp. MPT IME BIOS > > > Copyright 1995-2005 LSI Logic Corp. > > > MPTBIOS-IME-5.13.08 > > > > > > CD-ROM: 9F > > > Loading /5.2/I386/CDBOOT > > > probing: pc0 apm pci mem[616K 2046M a20=on] > > > disk: hd0+* cd0 > > > >> OpenBSD/i386 CDBOOT 3.17 > > > boot> > > > booting cd0a:/5.2/i386/bsd.rd: 5973772+958284 [52+229744+218028]=0x709d1c > > > entry point at 0x200128 > > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > > The Regents of the University of California. All rights reserved. > > > Copyright (c) 19995-2012 OpenBSD. All rights reserved. > > > http://www.OpenBSD.org > > > OpenBSD 5.2 (RAMDISK_CD) #287: Wed Aug 1 10:19:00 MDT 2012 > > > der...@i386.openbsd.org:/usr/src/sys/sys/arch/i386/compile/RAMDISK_CD > > > cpu0: Intel(R) Xeon(TM) CPU 3.00 GHz ("GenuineIntel" 686-class) > > > cpu0: FPU, V86, DE, PSE, TSC, MSR, PAE, MCE, CX8, APIC, SEP, MTRR, > > PGE,MCA, > > > CMOV, PAT, PSE36, CF > > > > > LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM.SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,CNXT- > > > ID, > > > CX16,xTPR > > > real mem = 2146414592 (2046MB) > > > avail mem = 2183640064 (2006MB) > > > mainbus0 at root > > > bios0 at mainbus0: AT/286+ BIOS, date 09/16/85, BIOS32 rev. 0 @ 0xfd418, > > > SMBIOS > > > rev. 2.33 @ 0xdc010 (58 entries) > > > bios0: vendor FSC version "6.8 Rev. R04A5F1.1790" date 09/16/2005 > > > bios0: FUJITSU SIEMENES PRIMERGY RX200S2 > > > acpi0 at bios0: rev 0 > > > acpi0: sleep states S0 S1 S4 S5 > > > acpi0: tables DSDT FACP MCFC SPCR APIC BOOY SSDT > > > acpimadt0 at acpi0 addt 0xfee00000: PC-AT compat > > > cpu0 at mainbus0: apid 0 (boot processor) > > > cpu0: apic clock running at 200MHz > > > cpu at mainbus0: not configured > > > cpu at mainbus0: not configured > > > cpu at mainbus0: not configured > > > ioacpi0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > > ioacpi1 at mainbus0: apid 3 pa 0xfec80000, version 20, 24 pins > > > ioacpi2 at mainbus0: apid 4 pa 0xfec80400, version 20, 24 pins > > > acpiprt0 at acpi0: bus 2 (P2P3) > > > acpiprt1 at acpi0: bus 3 (P2P4) > > > acpiprt2 at acpi0: bus 0 (PCI0) > > > acpiprt3 at acpi0: bus 4 (PCIB) > > > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xdc000/0x4000! > > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > > pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x09 > > > "Intel E7520 Error Reporting" rev 0x09 at pci0 dev 0 function 1 not > > > configured > > > ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x09 > > > pci1 at ppb0 bus 1 > > > ppb1 at pci1 dev 0 function 0 "Intel 6700PXH PCIE-PCIX" rev 0x09 > > > pci2 at ppb1 bus 2 > > > "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured > > > ppb2 at pci1 dev 0 function 2 "Intel 6700PXH PCIE-PCIX" rev 0x09 > > > pci3 at ppb2 bus 3 > > > em0 at pci3 dev 3 function 0 "Intel PRO/1000MT (82545CM)" rev 0x04: apic > > 2 > > > int1 > > > 6, address 00:04:23:c4:01:16 > > > mpi0 at pci3 dev 5 function 0 "Symbios Logic 53c1030" rev 0x07: msi > > > scsibus0 at mpi0: 16 targets, initiator 7 > > > sd0 at scsibus0 targ 1 lun 0: <LSILOGIC, 1030 IM, 1000> SCSI2 0/direct > > fixed > > > sd0: 34700MB, 512 bytes/sector, 71065600 sectors > > > mpi0: timeout > > > mpi0: timeout > > > mpi0: timeout > > > mpi0: timeout > > > mpi0: timeout > > > mpi0: timeout > > > mpi0: phys disk Async at 0 MHz width 8bit offset 0 QAS 0 DT 0 IU 0 > > > em1 at pci3 dev 6 function 0 "Intel PRO/100MT (82546GB)" rev 0x03: apic 2 > > > int 1 > > > 6uvm_fault (0xd07f31d8, 0x0, 0, 1) -> e > > > fatal page fault (6) in supervisor mode > > > trap type 6 code 0 eip 0 cs 50 eflags 10282 cr2 0 cpl 50 > > > panic: trap type 6, code=0, pc=0 > > > The operating system has halted > > > Please press any key to reboot > > > --------------- > > > > > > Thanks > > > > > > On Thu, Nov 29, 2012 at 2:25 PM, Nick Holland > > > <n...@holland-consulting.net>wrote: > > > > > > > On 11/29/12 06:42, Tony Berth wrote: > > > > > Thanks > > > > > > > > > > Both i386 and amd64 fail! But, are that many differences between > > stable > > > > and > > > > > current? > > > > > > > > You caught us, nothing has changed in OpenBSD since 1995, we just drink > > > > beer and increment the version number every six months. > > > > </sarcasm> > > > > > > > > The most significant changes tend to take place just AFTER unlocking of > > > > a new version of OpenBSD -- i.e., BEFORE the CDs ship. So yes, > > -current > > > > is significantly different than the most recent release. > > > > > > > > Now, step away from the "!" key, and lets see if we can help you help > > us > > > > help you. > > > > > > > > Here's the situation... apparently, no one has been installing OpenBSD > > > > on this particular machine before. Never heard of it myself, whatever > > > > that means. A quick google showed me a lot of PDF files I don't wish > > to > > > > look at, but apparently it is a rack-mount server. > > > > > > > > There's apparently a problem between this machine and OpenBSD. > > > > > > > > You have three choices I see: > > > > 1) provide one or two of these machines to developers. > > > > 2) provide useful information to developers > > > > 3) give up, as without either 1 or 2, we aren't going to be able to > > help > > > > you. > > > > > > > > I'm going to guess you don't have the spare money/machine to provide a > > > > few machines to the project. > > > > > > > > The first piece of useful information we could use would be a COMPLETE > > > > dmesg, collected via a serial port as an install kernel boots. So, > > grab > > > > a null modem cable and another computer, and gather that for us...then > > > > maybe we can give you some suggestions. The dmesg tells us what is in > > > > your machine, how it is connected, and sometimes, an idea of what went > > > > wrong. > > > > > > > > Nick. > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Nov 29, 2012 at 11:20 AM, Micha?? Markowski > > > > > <markows...@gmail.com>wrote: > > > > > > > > > >> 2012/11/29 Tony Berth <tonybe...@googlemail.com>: > > > > >> > s a fresh install! I couldn't find a CD image for current or did I > > > > >> > miss something? > > > > >> > > > > >> Try latest snapshot, e.g. > > > > >> http://ftp.icm.edu.pl/pub/OpenBSD/snapshots/i386/ (or amd64, you > > > > >> didn't specify) > > > > >> > > > > >> -- > > > > >> Micha?? Markowski
