On 11/26/12 11:49, Jeremie Le Hen wrote:
Alexander,

On Mon, Nov 26, 2012 at 10:45:16AM +0100, Alexander Hall wrote:
On 11/26/12 09:44, Jeremie Le Hen wrote:
Hello,

I have a Soekris net5501 in which I put a PCI Ralink wireless adapter.

For months, I haven't used the wireless adapter -- it was using Ethernet
-- at all and it worked like a charm (uptime > 100 days).  For a few
days, I have used it as an access point but unfortunately I get very
frequent hard locks (even the serial console is unresponsive).

I'm looking for a way to debug this.

Here is the relevant device:

   0:14:0: Ralink RT2860
          0x0000: Vendor ID: 1814 Product ID: 0601
          0x0004: Command: 0117 Status ID: 0410
          0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 00
          0x000c: BIST: 00 Header Type: 00 Latency Timer: 40 Cache Line Size: 08
          0x0010: BAR mem 32bit addr: 0xa0010000/0x00010000
          0x0014: BAR empty (00000000)
          0x0018: BAR empty (00000000)
          0x001c: BAR empty (00000000)
          0x0020: BAR empty (00000000)
          0x0024: BAR empty (00000000)
          0x0028: Cardbus CIS: 00008001
          0x002c: Subsystem Vendor ID: 17f9 Product ID: 0023
          0x0030: Expansion ROM Base Address: 00000000
          0x0038: 00000000
          0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 02 Max Lat: 04
          0x0040: Capability 0x01: Power Management

I'm clueless how to troubleshoot the problem.  Do you have any hints
about what could cause a general dead lock in the system ?  Locked in a
high SPL level?

First thing I'd look at is if the power supply is big enough. Since you
didn't supply a dmesg, we can only guess what's in there.

Dmesg is unavailable for now (too many ral(4) debugging messages in the
ring buffer :)), I think I will have to reboot to get it.  If you really
need additional information from there, I will reboot it when I will be
back at home.

You might get away with /var/run/dmesg.boot

/Alexander


Here is the output of the pcidump command:
   Domain /dev/pci0:
    0:1:0: AMD Geode LX
    0:1:2: AMD Geode LX Crypto
    0:6:0: VIA VT6105M RhineIII
    0:7:0: VIA VT6105M RhineIII
    0:8:0: VIA VT6105M RhineIII
    0:9:0: VIA VT6105M RhineIII
    0:14:0: Ralink RT2860
    0:17:0: Hifn 7955/7954
    0:20:0: AMD CS5536 ISA
    0:20:2: AMD CS5536 IDE
    0:21:0: AMD CS5536 USB
    0:21:1: AMD CS5536 USB

There is no hard-drive in the box, only a Compact Flash mounted read/only.

Reply via email to