Hello all,
I was surfing on a Web when suddenly all traffic stopped. Closer examination
revealed "Too many open files" failure with the dhclient. Since there have been
improvements in the dhclient lately, could this be related?
Tried to do pkill -TERM dhclient && sudo dhclient trunk0 but no cigar. Any
hints what to try the next time if this occurs? Uptime was 3 days if it happens
to matter. I'm also testing Brain Fuck Scheduler patch since it makes videos
playable. Yes, I can rule it out by running GENERIC if necessary.
Complete dmesg at the bottom of this message.
But now, here's some information:
$ dmesg |tail -100
...
arpresolve: 192.168.50.101: route without link local address
arpresolve: 192.168.50.101: route without link local address
arpresolve: 192.168.50.101: route without link local address
arpresolve: 192.168.50.101: route without link local address
arpresolve: 192.168.50.101: route without link local address
...
/var/log/daemon:
Nov 12 23:08:38 dhclient[9627]: DHCPDISCOVER on trunk0 to
255.255.255.255 port 67 interval 3
Nov 12 23:08:38 dhclient[9627]: DHCPOFFER from 192.168.50.101
(00:30:18:a4:f8:e3)
Nov 12 23:08:38 dhclient[9627]: DHCPREQUEST on trunk0 to
255.255.255.255 port 67
Nov 12 23:08:38 dhclient[9627]: DHCPACK from 192.168.50.101 (00:30:18:a4:f8:e3)
Nov 12 23:08:38 dhclient[7427]: socket open failed: Too many open files
Nov 12 23:08:38 dhclient[9627]: bound to 192.168.50.102 -- renewal in
300 seconds.
Nov 12 23:08:38 dhclient[9627]: DHCPDISCOVER on trunk0 to
255.255.255.255 port 67 interval 3
Nov 12 23:08:38 dhclient[9627]: DHCPOFFER from 192.168.50.101
(00:30:18:a4:f8:e3)
Nov 12 23:08:38 dhclient[9627]: DHCPREQUEST on trunk0 to
255.255.255.255 port 67
Nov 12 23:08:38 dhclient[9627]: DHCPACK from 192.168.50.101 (00:30:18:a4:f8:e3)
Nov 12 23:08:38 dhclient[7427]: socket open failed: Too many open files
Nov 12 23:08:38 dhclient[9627]: bound to 192.168.50.102 -- renewal in
300 seconds.
/var/log/messages
Nov 12 23:11:59 /bsd: arpresolve: 192.168.50.101: route without link
local address
Nov 12 23:12:21 /bsd: arpresolve: 192.168.50.101: route without link
local address
Nov 12 23:14:58 last message repeated 15 times
Nov 12 23:22:22 last message repeated 32 times
Nov 12 23:22:24 dhclient[9276]: SIOCDIFADDR failed (192.168.50.102):
Can't assign requested address
Nov 12 23:22:24 dhclient[9276]: SIOCDIFADDR failed (192.168.50.102):
Can't assign requested address
Nov 12 23:22:27 /bsd: arpresolve: 192.168.50.101: route without link
local address
Nov 12 23:23:04 last message repeated 5 times
$ ulimit -a
time(cpu-seconds) unlimited
file(blocks) unlimited
coredump(blocks) unlimited
data(kbytes) 716800
stack(kbytes) 4096
lockedmem(kbytes) 1298308
memory(kbytes) 3881796
nofiles(descriptors) 500
processes 128
NOTICE: Closed Chromium since it had several descriptors opened. After that
fstat |wc -l showed ~400. Tried to restart dhclient again but with no luck.
$ route -n show # (not using inet6)
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 192.168.50.101 UGS 4 192 - 8 trunk0
127/8 127.0.0.1 UGRS 0 0 33152 8 lo0
127.0.0.1 127.0.0.1 UH 2 2935 33152 4 lo0
192.168.50/24 link#5 UC 1 0 - 4 trunk0
192.168.50.101 00:30:18:a4:f8:e3 UHLc 0 55 - 4 trunk0
192.168.50.102 127.0.0.1 UG 0 0 33152 56 lo0
224/4 127.0.0.1 URS 0 0 33152 8 lo0
OpenBSD 5.2-current (GENERIC.MP) #0: Fri Nov 9 15:19:24 EET 2012
weezel@:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4121640960 (3930MB)
avail mem = 3989434368 (3804MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe0010 (44 entries)
bios0: vendor LENOVO version "6JET93WW (1.51 )" date 03/26/2012
bios0: LENOVO 284756G
acpi0 at bios0: rev 4
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3)
USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4)
RP04(S4) PXSX(S4) RP05(S4) RP06(S4) BLAN(S4) LID_(S3) SLPB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz, 1995.34 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 494MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz, 4947.58 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 7 (P0P1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 4 (RP03)
acpiprt6 at acpi0: bus 5 (RP04)
acpiprt7 at acpi0: bus -1 (RP05)
acpiprt8 at acpi0: bus 6 (RP06)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature is 105 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "42T4704" serial 681 type LION oem "Panasonic"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Realtek ALC269, Intel/0x2802, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 2
"JMicron SD/MMC" rev 0x00 at pci1 dev 0 function 0 not configured
sdhc0 at pci1 dev 0 function 2 "JMicron SD Host Controller" rev 0x00:
apic 2 int 16
sdmmc0 at sdhc0
"JMicron Memory Stick" rev 0x00 at pci1 dev 0 function 3 not configured
"JMicron xD" rev 0x00 at pci1 dev 0 function 4 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
pci4 at ppb3 bus 5
iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi,
MIMO 1T2R, MoW, address 00:24:d6:00:42:b6
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi
pci5 at ppb4 bus 6
re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
(0x2800), apic 2 int 17, address 00:26:9e:39:a9:be
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 7
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
ahci0: PHY offline on port 4
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, FUJITSU MJA2250B, 0084> SCSI3
0/direct fixed naa.500000e043e8eeb8
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus0 targ 1 lun 0: <Optiarc, DVD RW AD-7590S, 1.L1> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
sdmmc0: can't enable card
uhub8 at uhub0 port 1 "Standard Microsystems product 0x2514" rev
2.00/b.b3 addr 2
uhidev0 at uhub8 port 1 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/12.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/12.01 addr 3
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub8 port 1 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/12.01 addr 3
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
uhidev3 at uhub8 port 2 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/12.01 addr 4
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub8 port 2 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/12.01 addr 4
uhidev4: iclass 3/1, 8 report ids
ums1 at uhidev4 reportid 2: 16 buttons, Z dir
wsmouse3 at ums1 mux 0
uhid7 at uhidev4 reportid 3: input=4, output=0, feature=0
uhid8 at uhidev4 reportid 4: input=1, output=0, feature=0
uhid9 at uhidev4 reportid 8: input=1, output=0, feature=0
uhidev5 at uhub8 port 2 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/12.01 addr 4
uhidev5: iclass 3/0, 33 report ids
uhid10 at uhidev5 reportid 16: input=6, output=6, feature=0
uhid11 at uhidev5 reportid 17: input=19, output=19, feature=0
uhid12 at uhidev5 reportid 32: input=14, output=14, feature=0
uhid13 at uhidev5 reportid 33: input=31, output=31, feature=0
ugen0 at uhub7 port 1 "Broadcom Corp Broadcom Bluetooth Device" rev
2.00/1.54 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a swap on sd0b dump on sd0b
