same here ... i wish i could find an affordable tadpole on ebay ... :-) On Thu, Oct 11, 2012 at 11:36:07PM +0200, David Coppa wrote: > I'm feeling quite envious ;) > > ciao > David > > On Thu, Oct 11, 2012 at 11:11 PM, Maxim Belooussov <beloous...@gmail.com> > wrote: > > Hi all, > > > > It's kinda cool to see that wireless and sd card reader devices work. > > > > console is keyboard/display > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights reserved. > > Copyright (c) 1995-2012 OpenBSD. All rights reserved. > > http://www.OpenBSD.org > > > > OpenBSD 5.1 (GENERIC) #130: Sun Feb 12 12:19:20 MST 2012 > > dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC > > real mem = 536870912 (512MB) > > avail mem = 514727936 (490MB) > > mainbus0 at root: SPARCLE 500SX (UltraSPARC-IIe 500MHz) > > cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 500 MHz > > cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K > > external (64 b/l) > > psycho0 at mainbus0: pci108e,a001, impl 0, version 0, ign 7c0 > > psycho0: bus range 0-255, PCI bus 0 > > psycho0: dvma map c0000000-dfffffff > > pci0 at psycho0 > > ebus0 at pci0 dev 12 function 0 "Altera EBus" rev 0x01 > > "flashprom" at ebus0 addr 0-fffff not configured > > clock1 at ebus0 addr 0-1fff: mk48t59 > > ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 > > "dma" at ebus1 addr 0-ffff not configured > > com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo > > pckbc0 at ebus1 addr 60-67, 60-67 ivec 0x29 ivec 0x26 ivec 0x2a > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > "TAD,wb-memstick" at ebus1 addr 148-14f ivec 0xe not configured > > wbsd0 at ebus1 addr 358-35f ivec 0xa > > sdmmc0 at wbsd0 > > alipm0 at pci0 dev 17 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz > > clock > > iic0 at alipm0 > > dc0 at pci0 dev 1 function 0 "Davicom DM9102" rev 0x31: ivec 0x7c6, > > address 00:00:83:ce:04:04 > > amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 0 > > wi0 at pci0 dev 11 function 0 "Intersil PRISM2.5" rev 0x01: ivec 0x7d4 > > wi0: PRISM2.5 ISL3874A(Mini-PCI) (0x8013), Firmware 1.0.7 (primary), > > 1.4.9 (station), address 00:90:96:72:1d:e8 > > ohci0 at pci0 dev 2 function 0 "NEC USB" rev 0x43: ivec 0x7dc, version 1.0 > > ohci1 at pci0 dev 2 function 1 "NEC USB" rev 0x43: ivec 0x7dd, version 1.0 > > ehci0 at pci0 dev 2 function 2 "NEC USB" rev 0x04: ivec 0x7de > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 > > cbb0 at pci0 dev 3 function 0 "TI PCI1225 CardBus" rev 0x01: ivec 0x7da > > autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x01: ivec 0x7e3 > > ac97: codec id 0x83847609 (SigmaTel STAC9721/23) > > ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D > > audio0 at autri0 > > midi0 at autri0: <4DWAVE MIDI UART> > > pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: > > DMA, channel 0 configured to native-PCI, channel 1 configured to > > native-PCI > > pciide0: using ivec 0x7cc for native-PCI interrupt > > wd0 at pciide0 channel 0 drive 0: <IC25N040ATMR04-0> > > wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors > > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > > atapiscsi0 at pciide0 channel 1 drive 0 > > scsibus0 at atapiscsi0: 2 targets > > cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, J.9A> ATAPI 5/cdrom removable > > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > > machfb0 at pci0 dev 19 function 0 "ATI Mach64" rev 0x64 > > machfb0: ATY,RageMobility, 1400x1050 > > wsdisplay0 at machfb0 mux 1: console (std, sun emulation), using wskbd0 > > usb1 at ohci0: USB revision 1.0 > > uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > > usb2 at ohci1: USB revision 1.0 > > uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > > cardslot0 at cbb0 slot 0 flags 0 > > cardbus0 at cardslot0: bus 1 device 0 cacheline 0x10, lattimer 0x20 > > pcmcia0 at cardslot0 > > vscsi0 at root > > scsibus1 at vscsi0: 256 targets > > softraid0 at root > > scsibus2 at softraid0: 256 targets > > bootpath: /pci@1f,0/ide@d,0/disk@0,0 > > root on wd0a (66dd7746863e7550.a) swap on wd0b dump on wd0b > > > > Max >
-- Gilles Chehade https://www.poolp.org @poolpOrg