Chris Cappuccio, 2012-08-31 21:44:32:
> somehow, your computer thinks C3_CPUID_HAS_RNG is valid, which would mean you
> are \
> running the via_nano_setup routine, which means your cpu model is "VIA Nano \
> processor", which is all just wrong. wtf?
>
> > OpenBSD 5.2-current (GENERIC.MP) #6: Mon Aug 27 20:40:45 MDT 2012
> > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > cpu0: AMD Phenom(tm) II X4 B50 Processor ("AuthenticAMD" 686-class, 512KB
> > L2 cac
> > he) 3.11 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> > LUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,FFXSR,3DNOW2,3DNOW,SSE3,CX16,POPCNT,LAHF,CMPLEG,
> > SVM,AMCR8,ABM,SSE4A,MASSE,3DNOWP
> > real mem = 536395776 (511MB)
> > avail mem = 516698112 (492MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 06/23/99, BIOS32 rev. 0 @ 0xff046,
> > SMBIOS
> > rev. 2.4 @ 0xfd900 (11 entries)
> > bios0: vendor Bochs version "Bochs" date 01/01/2007
> > bios0: Bochs Bochs
> > acpi0 at bios0: rev 0
> > acpi0: sleep states S3 S4 S5
> > acpi0: tables DSDT FACP SSDT APIC HPET
> > acpi0: wakeup devices
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > acpihpet0 at acpi0: 100000000 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > mpbios0 at bios0: Intel MP Specification 1.4
> > cpu0 at mainbus0: apid 0 (boot processor)
> > kernel: protection fault trap, code=0
> > Stopped at viac3_rnd+0x9f: rdmsr
> > viac3_rnd(d0b025a0,d09e3268,d08f384b,3,4) at viac3_rnd+0x9f
> > amd64_errata(d0b025a0,d0b025a0,d0bbbbf8,d078eb77,d0b025a0) at
> > amd64_errata+0xb9
> >
> > cpu_init(d0b025a0,0,2000,0,d0bbbc04) at cpu_init+0x19
> > cpu_attach(d164bfc0,d155e400,d0bbbc4c,d03ee29b,d078de30) at cpu_attach+0x297
> > config_attach(d164bfc0,d09d45c0,d0bbbc4c,d078cb20,800,0,0,d08f3129,0,1,d09f21c0
> > ,100f42,78bfbff) at config_attach+0x1bb
> > mpbios_cpu(f51a5a9c,d16737c0,2,1,2) at mpbios_cpu+0x85
> > mpbios_scan(d16737c0,d16737c0,d0bbbd60,d03ee29b,0) at mpbios_scan+0x2dc
> > config_attach(d164bf80,d09d45a0,d0bbbd60,d0789d30,b) at config_attach+0x1bb
> > biosattach(d164bfc0,d164bf80,d0bbbe58,d03ee29b,0) at biosattach+0x517
> > config_attach(d164bfc0,d09d4560,d0bbbe58,d05afb60,30000000) at
> > config_attach+0x
> > 1bb
> > ddb{0}>
> >
> >
> > The host has an AMD Phenom(tm) II X4 B50 Processor.
> > The guest OpenBSD tries to boot a -current bsd.mp. This works with other
> > cpu types specified (like kvm32, or qemu32...), I just wanted to try out
> > if the guest would be faster with the 'phenom' or 'host' cpu type.
Since it works with -stable (5.1), I'm attaching the -stable dmesg, maybe it
tells something to someone :)
Is there a commit, around which I should look, and try out reverting some
things that might pinpoint the change since -stable that triggers this
problem?
OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD Phenom(tm) II X4 B50 Processor ("AuthenticAMD" 686-class, 512KB L2
cache) 3.11 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,FFXSR,3DNOW2,3DNOW,SSE3,CX16,POPCNT,LAHF,SVM,ABM,SSE4A
real mem = 536399872 (511MB)
avail mem = 517509120 (493MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/23/99, BIOS32 rev. 0 @ 0xff046, SMBIOS
rev. 2.4 @ 0xfd8c0 (11 entries)
bios0: vendor Bochs version "Bochs" date 01/01/2011
bios0: Bochs Bochs
acpi0 at bios0: rev 0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HPET SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 1009MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) II X4 B50 Processor ("AuthenticAMD" 686-class, 512KB L2
cache) 3.14 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,FFXSR,3DNOW2,3DNOW,SSE3,CX16,POPCNT,LAHF,SVM,ABM,SSE4A
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type ISA
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
bios0: ROM list: 0xc0000/0x8c00 0xc9000/0xa00 0xca000/0x2400 0xee800/0x1800!
vmt0 at mainbus0
vmware: open failed, eax=564d5868, ecx=0000001e, edx=00005658
vmt0: failed to open backdoor RPC channel (TCLO protocol)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 15360MB, 31457280 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 1.2.> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9
iic0 at piixpm0
iic0: addr 0x19 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000 01=0000
02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1b 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000 01=0000
02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1c 0f=00 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000 01=0000
02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1d 0f=00 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000 01=0000
02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1e 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000 01=0000
02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1f 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000 01=0000
02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x29 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x2b 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4c 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4e 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel PRO/1000MT (82540EM)" rev 0x03: apic 0 int
11, address 52:54:00:12:34:57
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (140aa3f635f7fc4d.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
Daniel
--
LÉVAI Dániel
PGP key ID = 0x83B63A8F
Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F
